Emerson Unidrive M101 User manual

Quick Start Guide

Unidrive M100-101

Frame sizes 1 to 4

Value drive with quality and

performance for open loop

applications

Part Number: 0478-0035-06

Issue: 6

Unidrive M100 101 Quick Start Guide English Iss6.book Page 1 Wednesday, September 9, 2015 4:07 PM

This guide is intended to provide basic information required in order to set-up a drive to run a motor.

For more detailed installation information, please refer to the Unidrive M100 / 101 User Guide which

is available to download from:

http://www.emersonindustrial.com/en-EN/controltechniques/downloads/userguidesandsoftware/

Pages/downloads.aspx.

www.emersonindustrial.com/en-EN/leroy-somer-motors-drives/downloads/Pages/manuals.aspx.

Warnings, Cautions and Notes

Issue Number: 6

A Warning contains information which is essential for avoiding a safety hazard.

A Caution contains information which is necessary for avoiding a risk of damage to the

product or other equipment.

A Note contains information, which helps to ensure correct operation of the product.

This guide does not include safety information. Incorrect installation or operation of the

drive, could cause personnel injury or equipment damage. For essential safety

information, please refer to the Unidrive M100 / 101 User Guide or the safety booklet

supplied with the drive.

WARNING

CAUT IO N

NOTE

WARNING

Unidrive M100 101 Quick Start Guide English Iss6.book Page 2 Wednesday, September 9, 2015 4:07 PM

Unidrive M100-101 Quick Start Guide

Issue Number: 6

Contents

1 Product information ....................................................................................5

1.1 Ratings .................................................................................................................... 5

2 Options .........................................................................................................6

3 Mechanical installation ...............................................................................6

4 Electrical installation ...................................................................................9

4.1 AC supply requirements .......................................................................................... 9

4.2 External braking resistor .......................................................................................... 9

4.3 Ground leakage ..................................................................................................... 11

4.4 Control terminal configurations and wiring ............................................................. 12

4.5 EMC ....................................................................................................................... 17

5 Keypad and display ...................................................................................19

5.1 Saving parameters ................................................................................................ 20

5.2 Restoring parameter defaults ................................................................................ 20

6 Basic parameters (Menu 0) .......................................................................21

6.1 Menu 0: Basic parameters ..................................................................................... 21

6.2 Unidrive M100/101 parameter descriptions ........................................................... 26

7 Running the motor ....................................................................................37

8 Diagnostics ................................................................................................38

8.1 Alarm indications ................................................................................................... 41

9 NV Media Card Operation .........................................................................42

10 UL listing information ...............................................................................43

10.1 General .................................................................................................................. 43

10.2 Mounting ................................................................................................................ 43

10.3 Environment .......................................................................................................... 43

10.4 Electrical ratings .................................................................................................... 43

10.5 Opening of branch circuit ....................................................................................... 43

10.6 Electrical installation .............................................................................................. 43

10.7 cUL requirements for frame size 4 ......................................................................... 44

10.8 Motor overload protection ...................................................................................... 44

10.9 Motor overspeed protection ................................................................................... 44

10.10 Thermal memory retention ..................................................................................... 44

10.11 Group installation ................................................................................................... 45

10.12 UL listed accessories ............................................................................................. 45

Unidrive M100 101 Quick Start Guide English Iss6.book Page 3 Wednesday, September 9, 2015 4:07 PM

4Unidrive M100-101 Quick Start Guide

Issue Number: 6

Declaration of Conformity

This declaration applies to the Unidrive-M product range comprising model numbers listed below:

The model number may be followed by additional characters that do not affect the ratings.

The variable speed drive products listed above have been designed and manufactured in accordance with the

following European harmonized standards:

EN 61000-3-2: 2006 Applicable where input current < 16 A. No limits apply for professional equipment where input

power ≥1 kW.

These products comply with the Restriction of Hazardous Substances Directive - RoHS 2011/65/EU, the Low

Voltage Directive - LVD 2006/95/EC and the Electromagnetic Compatibility Directive - EMC 2004/108/EC.

These electronic drive products are intended to be used with appropriate motors, controllers, electrical

protection components and other equipment to form complete end products or systems. Compliance with

safety and EMC regulations depends upon installing and configuring drives correctly, including using the

specified input filters. The drives must be installed only by professional installers who are familiar with

requirements for safety and EMC. The assembler is responsible for ensuring that the end product or

system complies with all the relevant laws in the country where it is to be used. Refer to the User Guide. An

EMC data sheet is also available giving detailed EMC information.

Control Techniques Ltd

The Gro

Newtown

Powys

SY16 3BE

Moteurs Leroy-Somer

Usine des Agriers

Boulevard Marcellin Leroy

CS10015

16915 Angoulême Cedex 9

France

Model

No. Interpretation Format: Xaaa-bbc ddddde Format: Xaa-bbc ddddde

X Application M = Manufacturing Automation, E = Elevator, F = Flow,

H = HVAC, CSD = Compressor HS = High Speed

aa(a) Control System 100, 101, 200, 201, 300, 400, 600, 700, 701, 702 70, 71, 72

bb Frame Size 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11

c Voltage Rating 1 = 100 V, 2 = 200 V, 4 = 400 V, 5 = 575 V, 6 = 690 V

ddddd Current Rating Example 01000 = 100 A

e Configuration

A = AC in AC out (with internal choke), D = DC in AC out (Inverter), C = AC in DC out

(Rectifier), E = AC in AC out (without internal choke), T = AC in AC out with Dual

Rectifier

EN 61800-5-1:2007 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -

Electrical, thermal and energy

EN 61800-3: 2004 Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific

test methods

EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for

industrial environments

EN 61000-6-4:2007 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for

industrial environments

EN 61000-3-2:2006 Electromagnetic compatibility (EMC) - Part 3-2: Limits for harmonic current emissions

(equipment input current ≤16 A per phase)

EN 61000-3-3:2008

Electromagnetic compatibility (EMC) - Part 3-3: Limitation of voltage changes, voltage

fluctuations and flicker in public, low voltage supply systems, for equipment with rated

current ≤16 A per phase and not subject to conditional connection

G. Williams

Vice President, Technology

Date: 30th July 2015

Place: Newtown, Powys, UK

Unidrive M100 101 Quick Start Guide English Iss6.book Page 4 Wednesday, September 9, 2015 4:07 PM

Unidrive M100-101 Quick Start Guide 5

Issue Number: 6

1 Product information

1.1 Ratings

Figure 1-1 Model number structure

Model

Input

phases

Max.

cont

input

current

Max input

fuse rating

Nominal cable size Output current

European USA

1 Ph 3 Ph Input Output Input Output

Max.

cont

output

current

Nominal

power

Motor

power

ph A A A mm2mm2AWG AWG A kW hp

01100017 1 8.7 10 1 1 16 16 1.7 0.25 0.33

01100024 1 11.1 16 1 1 14 16 2.4 0.37 0.5

01200017 1 4.5 6 1 1 16 16 1.7 0.25 0.33

01200024 1 5.3 6 1 1 16 16 2.4 0.37 0.5

01200033 1 8.3 10 1 1 16 16 3.3 0.55 0.75

01200042 1 10.4 16 1 1 16 16 4.2 0.75 1

02100042 1 18.8 20 2.5 1 12 16 4.2 0.75 1

02100056 1 24 25 4 1 10 16 5.6 1.1 1.5

02200024 1 / 3 5.3/4.1 6 6 1 1 16 16 2.4 0.37 0.5

02200033 1 / 3 8.3/6.7 10 10 1 1 16 16 3.3 0.55 0.75

02200042 1 / 3 10.4/7.5 16 10 1 1 16 16 4.2 0.75 1

02200056 1 / 3 14.9/11.3 20 15 2.5/1.5 1 12/14 16 5.6 1.1 1.5

02200075 1 / 3 18.1/13.5 20 15 2.5 1 12 16 7.5 1.5 2

02400013 3 2.4 6 1 1 16 16 1.3 0.37 0.5

02400018 3 2.9 6 1 1 16 16 1.8 0.55 0.75

02400023 3 3.5 6 1 1 16 16 2.3 0.75 1

02400032 3 5.1 61 116163.21.11.5

02400041 3 6.2 10 1 1 16 16 4.1 1.5 2

03200100 1 / 3 23.9/17.7 25 20 4 1.5 10/12 14 10 2.2 3

03400056 3 8.7 10 1 1 14 16 5.6 2.2 3

03400073 3 12.2 16 1.5 1 12 16 7.3 3 3

03400094 3 14.8 16 2.5 1.5 12 14 9.4 4 5

04200133 1 / 3 23.7/16.9 25 20 4/2.5 2.5 10 12 13.3 3 3

04200176 3 21.3 25 4 2.5 10 12 17.6 4 5

04400135 3 16.3 20 2.5 2.5 10 12 13.5 5.5 7.5

04400170 3 20.7 25 4 2.5 10 12 17 7.5 10

The nominal cable sizes shown in the table above, are provided as a guide only. Ensure

that the cables used conform to the local wiring regulations.

NOTE

Product line:

Frame size:

Current Rating :

Heavy Duty current rating x10

Drive Format :

A – AC in AC out

Voltage rating

1 - 100 V (100 - 120 10 %)±

2 - 200 V (200 - 240 10 %)±

4 - 400 V (380 - 480 10 %)±

5 - 575 V (500 - 575 10 %)±

6 - 690 V (500 - 690 10 %)±

Derivative

Electrical Specifications

M100 - 03 400073 A

Unidrive M100 101 Quick Start Guide English Iss6.book Page 5 Wednesday, September 9, 2015 4:07 PM

6Unidrive M100-101 Quick Start Guide

Issue Number: 6

2Options

Table 2-1 AI Backup adaptor

3 Mechanical installation

The drives can be panel mounted with 0 mm space between the drives. For further information on

mechanical installation refer to the Drive User Guide.

To remove the terminal cover, use a flat bladed screwdriver to rotate the terminal cover locating clip

by approximately 30° in a counter clockwise direction, and then slide the cover down.

Type Option module Name Further Details

Backup

AI-Smart Adaptor

See Drive User Guide

AI-Backup Adaptor

Drive

Size

HWDM1M2∅AB*

mm in mm in mm in mm in mm in mm in mm in mm in

1 160 6.30 75 2.95 130 5.12 143 5.70 53 2.08 5 0.2

0 0.00 100 3.93

2 205 8.07 78 3.07 150 5.91 194 7.63 55 2.17 5 0.2

3 226 8.90 90 3.54 160 6.30 215 8.46 70.7 2.80 5 0.2

4 277 10.91 115 4.53 175 6.89 265 10.43 86 3.40 6 0.23

A minimum clearance of 100 mm above and below Frame 01 to 04 products is required

for applications where the product is subjected to rated load and rated ambient

temperature.

* A minimum clearance of 50 mm above and below Frame 01 to 04 products is permissible

in applications where either the ambient operating temperature is 35 °C or less or the

average output current is derated by 20 %.

HM1

11 mm

(0.43 in)

Cover

release

NOTE

Unidrive M100 101 Quick Start Guide English Iss6.book Page 6 Wednesday, September 9, 2015 4:07 PM

Unidrive M100-101 Quick Start Guide 7

Issue Number: 6

Table 3-1 Tools required

Table 3-2 Recommended torque settings

Derating for reduced clearances is to be applied in addition to the derating for increased

switching frequency if operating above 3 kHz. Refer to the Drive User Guide for the current

derating due to an increase in switching frequency.

If Din rail mounting is used in an installation, then mounting screws should be used to

secure the drive to the back plate.

Tool Location Size 1 Size 2 Size 3 Size 4

Small terminal screwdriver Control, relay terminals 9999

3 mm Flat-bladed screwdriver Power terminals 9

5 mm Flat-bladed screwdriver Terminal cover 9999

4 mm Flat-bladed screwdriver AC power terminals 9

Philips screwdriver Power terminals 999

Torx 10 driver EMC & MOV screws 9999

Torx 15 driver Fan screw 9

Torx 20 driver Fan screw 999

Model size Terminal block

description Torque settings

All Control terminals 0.2 N m (0.15 Ib ft)

Relay terminals 0.5 N m (0.37 Ib ft)

1Power terminals 0.5 N m (0.37 Ib ft)

2, 3, 4 1.4 N m (1.03 Ib ft)

NOTE

Unidrive M100 101 Quick Start Guide English Iss6.book Page 7 Wednesday, September 9, 2015 4:07 PM

8Unidrive M100-101 Quick Start Guide

Issue Number: 6

Figure 3-1 Feature diagram (size 2 shown)

Key

1. Rating label (On side of drive)

2. Identification label

4. Relay connections

5. Control connections

6. Braking terminal

7. Internal EMC filter screw

8. DC bus +

9. DC bus -

10. Motor connections

11. AC supply connections

12. Ground connections

Unidrive M100 101 Quick Start Guide English Iss6.book Page 8 Wednesday, September 9, 2015 4:07 PM

Unidrive M100-101 Quick Start Guide 9

Issue Number: 6

4 Electrical installation

An overlay of the electrical connections / terminals is included on the back page of this manual.

4.1 AC supply requirements

Voltage:

100 V drive: 100 V to 120 V ±10 %

200 V drive: 200 V to 240 V ±10 %

400 V drive: 380 V to 480 V ±10 %

Number of phases: 3

Maximum supply imbalance: 2 % negative phase sequence (equivalent to 3 % voltage imbalance

between phases).

Frequency range: 48 to 62 Hz

For UL compliance only, the maximum supply symmetrical fault current must be limited to 100 kA.

4.2 External braking resistor

4.2.1 Minimum resistance values and peak power rating for the braking resistor

at 40 °C (104 °F)

Table 4-1 Braking resistor resistance and power rating (100 V)

On the size 2 110 V drives or when connecting single phase to a dual rated 200 V unit, the

supply should be connected to L1 and L3. Also the DC bus (-) terminal on 110 V drives

has no internal connection. The 110 V drives use a voltage doubler circuit on the input,

therefore the default for Motor Rated Voltage (00.008) is 230 V.

Overload protection

When an external braking resistor is used, it is essential that an overload protection device

is incorporated in the braking resistor circuit; as shown in the electrical diagram on the

back cover.

Model

Minimum

resistance*

Ω

Instantaneous

power rating

Continuous

power rating

01100017 130 1.2 0.25

01100024 0.37

02100042 68 2.2 0.75

02100056 1.1

NOTE

WARNING

Unidrive M100 101 Quick Start Guide English Iss6.book Page 9 Wednesday, September 9, 2015 4:07 PM

10 Unidrive M100-101 Quick Start Guide

Issue Number: 6

Table 4-2 Braking resistor resistance and power rating (200 V)

Table 4-3 Braking resistor resistance and power rating (400 V)

* Resistor tolerance: ±10 %

Model

Minimum

resistance*

Ω

Instantaneous

power rating

Continuous

power rating

01200017

130 1.2

0.25

01200024 0.37

01200033 0.55

01200042 0.75

02200024

68 2.2

0.37

02200033 0.55

02200042 0.75

02200056 1.1

02200075 1.5

03200100 45 3.4 2.2

04200133 22 6.9 3.0

04200176 4.0

Model

Minimum

resistance*

Ω

Instantaneous

power rating

Continuous

power rating

02400013

270 2.3

0.37

02400018 0.55

02400023 0.75

02400032 1.1

02400041 1.5

03400056

100 6.1

2.2

03400073 3

03400094 4

04400135 50 12.2 5.5

04400170 7.5

Unidrive M100 101 Quick Start Guide English Iss6.book Page 10 Wednesday, September 9, 2015 4:07 PM

This manual suits for next models

Table of contents

Other Emerson Controllers manuals

Emerson

Emerson TESCOM 44-6800 E Series User manual

Emerson

Emerson Bristol ControlWave PAC User manual

Emerson

Emerson El-O-Matic E Series Instruction manual

Emerson

Emerson Fisher KC Series User manual

Emerson

Emerson Fisher 1052 User manual

Emerson

Emerson Vilter MicroVission Operation manual

Emerson

Emerson FISHER 657 User manual

Emerson

Emerson IC695PNC001-BFBE1 2 User manual

Emerson

Emerson Bettis XTE3000 User manual

Emerson

Emerson Fisher FIELDVUE DVC6200 SIS User manual

Emerson

Emerson Yarway Manual

Emerson

Emerson Fisher 480 Series User manual

Emerson

Emerson Bettis 2000 Series Manual

Emerson

Emerson AVENTICS Sentronic D User manual

Emerson

Emerson Yarway Integral Strainerimpulse 400 Series Operation and maintenance manual

Emerson

Emerson Fisher FIELDVUE DVC5000 Configuration guide

Emerson

Emerson PACSystems RX3i IC695CPE302 User manual

Emerson

Emerson ROC809 User manual

Emerson

Emerson Fisher 657C User manual

Emerson

Emerson Fisher 1098-EGR User manual

Emerson

Emerson Fisher 1051 User manual

Emerson

Emerson Fisher 299H User manual

Emerson

Emerson FISHER 912N Series User manual

Emerson

Emerson Fisher 1190 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide