Emerson Asco Advantage Series User manual

Installation, Operation

and Maintenance Manual

Advantage®Actuator

Designed and Manufactured by ITT

IOM.AA.ASCO.en-US.2008-08

Table Of Contents

Introduction and Safety...................................................................................................................................................2

Safety message levels.........................................................................................................................................................2

Warning...............................................................................................................................................................................2

Safety...................................................................................................................................................................................2

Product Description..........................................................................................................................................................4

Advantage actuator model number................................................................................................................................4

Identification tag............................................................................................................................................................4

Non-sealed and sealed bonnet description....................................................................................................................4

Valve diaphragm identification........................................................................................................................................5

Transportation and Storage............................................................................................................................................6

Transport and store the product.....................................................................................................................................6

Installation...........................................................................................................................................................................7

Install the valve and Advantage actuator.......................................................................................................................7

Install diaphragm...............................................................................................................................................................7

Mount the Advantage actuator to the valve................................................................................................................10

Tighten the bonnet fasteners.........................................................................................................................................10

Fastener torque table for valve body to actuator....................................................................................................10

Actuator operating pressure..........................................................................................................................................11

Set the adjustable opening stop.....................................................................................................................................11

Set the manual over-ride (close)....................................................................................................................................11

Set the manual over-ride (open)....................................................................................................................................12

Table Of Contents

Advantage® Actuator Installation and Operation Manual 1

Designed and Manufactured by ITT

Introduction and Safety

Advantage Actuator Installation and Operation Manual2

Introduction and Safety

Safety message levels

Definitions

Safety message level Indication

DANGER: A hazardous situation which, if not avoided, will

result in death or serious injury

WARNING: A hazardous situation which, if not avoided,

could result in death or serious injury

CAUTION: A hazardous situation which, if not avoided,

could result in minor or moderate injury

Electrical Hazard: The possibility of electrical risks if instructions

are not followed in a proper manner

NOTICE: • A potential situation which, if not avoided,

could result in an undesirable result or

state

• A practice not related to personal injury

User health and safety

General precautions

This product is designed and manufactured using good workmanship and materials, and meets

all applicable industry standards. This product should be used only as recommended by ITT or

ASCO.

WARNING:

• Misapplication of the valve can result in injury or property damage. Select valves and valve

components of the proper materials and make sure that they are consistent with your

specific performance requirements. Incorrect application of this product includes but is not

limited to:

• Exceeding the pressure or temperature rating

• Failing to maintain this product according to the recommendations

• Using this product to contain or control media that is incompatible with the materials of

construction

Qualifications and training

The personnel responsible for the assembly, operation, inspection, and maintenance of the

valve must be appropriately qualified. The operating company must do the following tasks:

• Define the responsibilities and competency of all personnel handling this equipment.

• Provide instruction and training.

Designed and Manufactured by ITT

Introduction and Safety

Advantage Actuator Installation and Operation Manual 3

• Ensure that the contents of the operating instructions have been fully understood by the

personnel.

Instruction and training can be carried out by ASCO as the reseller of the valve by order of the

manufacturer.

Non-compliance risks

Failure to comply with all safety precautions can result in the following conditions:

• Death or serious injury due to electrical, mechanical, and chemical influences

• Environmental damage due to the leakage of dangerous materials

• Product damage

• Property damage

• Loss of all claims for damages

Operational safety precautions

Be aware of these safety precautions when operating this product:

• Do not leave hot or cold components of the product unsecured against contact if they are a

source of danger.

• Do not remove the contact guard for moving parts when the product is in operation. Never

operate the product without the contact guard installed.

• Do not hang items from the product. Any accessories must be firmly or permanently

attached.

• Do not use the product as a step or hand hold.

• Do not paint over the identification tag, warnings, notices, or other identification marks

associated with the product.

Maintenance safety precautions

Be aware of these safety precautions when performing maintenance on this product:

• You must decontaminate the product if it has been exposed to harmful substances such as

caustic chemicals.

Use of unauthorized parts

Reconstruction or modification of the product is only permissible after consultation with ITT.

Genuine spare parts and accessories authorized by ITT serve to maintain safety. Use of non-

genuine ITT parts can annul liability of the manufacturer for the consequences. ITT parts are

not to be used in conjunction with products not supplied by ITT as this improper use can annul

all liability for the consequences.

Unacceptable modes of operation

The operational reliability of this product is only guaranteed when it is used as designated. The

operating limits given on the identification tag and in the data sheet may not be exceeded under

any circumstances. If the identification tag is missing or worn, contact ASCO for specific

instructions.

Designed and Manufactured by ITT

Product Description

Advantage actuator model number

The Advantage actuator is a spring or double acting pneumatic actuator. The actuator model number is

located on the ITT identification tag. The model number is a four digit number defining the actuator as

follows:

A = Advantage Actuator

Mode of Operation

• 1 = Fail Open (spring to open, air to close) (Direct Acting)

• 2 = Fail Close (spring to close, air to open) (Reverse Acting)

• 3 = Double Acting (air to open, air to close)

Actuator Series Size

• 3 (03, 04)

• 5 (05, 06)

• 8 (08, 09)

• 16 (15, 16, 17)

• 33 (32, 33, 34, 35)

• 47 (47, 48)

Values in parentheses are specific spring combinations for fail close actuators.

Series size 3, 5, 8, etc. equates to diaphragm effective area.

Examples:

Model # A308 = double acting actuator series 8

Model # A232 = fail close actuator series 33 with a 32 spring set

Identification tag

Line 1 — Valve serial number

Line 2 — Valve size and model number

Line 3 — Valve diaphragm type

Line 4 — Maximum recommended actuation pressure

Non-sealed and sealed bonnet description

The non-sealed bonnet has a weep hole that permits leakage of the process fluid if the diaphragm

ruptures. The sealed bonnet uses a special “v-notch” vent plug, which permits inspection for diaphragm

rupture.

Product Description

4 Advantage® Actuator Installation and Operation Manual

Designed and Manufactured by ITT

Figure 1: V-notch vent plug

Valve diaphragm identification

Diaphragm tab codes

All diaphragm materials and physical properties are batch traceable via permanent codes molded into the

diaphragm tabs. The molding date, grade of diaphragm, and valve size provide traceability to original batch

records.

Supplier Code

Date Code

Valve Size

Grade of

Diaphragm

Product Description (Continued)

Advantage® Actuator Installation and Operation Manual 5

Designed and Manufactured by ITT

Transportation and Storage

Advantage Actuator Installation and Operation Manual6

Transportation and Storage

Handling and unpacking guidelines

CAUTION:

Always observe the applicable standards and regulations regarding the prevention of

accidents when handling the product.

Handling guidelines

Follow these guidelines when handling the product to prevent damage:

• Use care when handling the product.

• Leave protective caps and covers on the product until installation.

Unpacking guidelines

Follow these guidelines when unpacking the product:

1. Inspect the package for damaged or missing items upon delivery.

2. Note any damaged or missing items on the receipt and freight bill.

3. Do not lift or pull on the electrical conduit lines. Doing so may cause the POC switches to

come out of calibration.

Storage, disposal, and return requirements

Storage If you are not immediately installing the product after delivery, store it as follows:

• Store the product in a dry room that maintains a constant temperature.

• Make sure that the products are not stacked on top of one another.

Disposal Dispose of this product and associated components in compliance with federal, state, and local

regulations.

Return Ensure these requirements are met before you return a product to ASCO:

• Contact ASCO for specific instructions on how to return the product.

• Clean the valve of all hazardous material.

• Complete a Material Safety Data Sheet or Process Data Sheet for any process fluid that

could remain on the valve.

• Obtain a Return Material Authorization from the factory.

Designed and Manufactured by ITT

Installation

Install the valve and Advantage actuator

Note: The actuator size and configuration can limit the actual operating pressure.

Consult the engineering catalog for actuator sizing. Consult the factory or engineering

catalog for vacuum operation.

Consider the following information before installing the actuator:

•The series 3, 5, 8, or 16 stainless steel bonnet Advantage Actuator can have the air inlets positioned in

any quadrant.

• Maximum valve operating pressure is 150 PSIG (10.34 bar). This pressure is applicable up to 100º F

(38º C). Valves at maximum pressure cannot be used at maximum temperatures.

To install the valve and Advantage Actuator, complete the following procedure:

1. If welding manually, remove the actuator.

2. If welding end valves for schedule 10 or heavier pipe, remove the actuator prior to welding in line.

3. If welding end valves for schedule 5 or lighter pipe and tubing, welding with automatic equipment is

acceptable. In this situation, complete the following steps prior to performing the weld.

a) Do not remove the actuator.

b) Set the valve to the open position.

c) Properly purge the valve with an inert gas.

4. Install the valve stem between 0 and 30 degrees above horizontal for horizontal piping systems to be

drained through the valve.

The proper valve orientation differs depending upon the valve type.

• Dia-Flo diaphragm valves can be installed in any orientation.

• Pure-Flo valves have either raised hash marks (castings) or small machined dots (forgings) on the

valve body to indicate the correct drain angle. Position these marks at the 12 o’clock position to

achieve the optimum drain angle.

5. Prior to pressurization (with the valve slightly open), follow the steps in the Tighten the bonnet

fasteners.

6. For series 33 and 47 actuators, prepare an eye bolt with a 0.625" -18 female thread to attach to the

adjusting bushing.

Note: Do not lift series 33 and 47 actuators by their air fittings.

Note: If the actuator is a series 47 actuator, use a hoist to lift the valve.

7. Connect the air line.

Connection size is 1/8" NPT for series 3, 5, 8 and 16 actuators and 1/4" NPT for series 33 and 47

actuators.

Note: Air line connections should be made with care so as not to damage the

plastic actuator covers.

8. Cycle the valve two to three times to verify smooth operation.

Install diaphragm

1. Unscrew the diaphragm from the compressor by turning counterclockwise.

a) Periodically inspect the valve compressor pin for excessive wear. Replace the pin or compressor if

excessive wear or axial pin movement is found.

The replacement diaphragm should be identical in size and grade to the original diaphragm.

2. For PTFE assemblies only:

Installation

Advantage® Actuator Installation and Operation Manual 7

Designed and Manufactured by ITT

a) Install the new elastomer backing cushion over the tube nut.

b) Invert the PTFE diaphragm by pressing the center of the diaphragm face with your thumbs while

holding the edge of the diaphragm with your fingers.

c) Engage the threads of the diaphragm into the tube nut by rotating clockwise.

d) Continue rotating the PTFE diaphragm clockwise into the compressor while securing the backing

cushion from rotating.

3. Rotate the diaphragm until hard stop or heavy resistance is achieved and additional force does not

significantly rotate the diaphragm into the compressor.

Installation (Continued)

8 Advantage® Actuator Installation and Operation Manual

Designed and Manufactured by ITT

Table of contents

Other Emerson Controllers manuals

Emerson

Emerson Fisher EZH Series User manual

Emerson

Emerson FISHER 66 User manual

Emerson

Emerson Fisher Y600A Series User manual

Emerson

Emerson FISHER MR108 Series User manual

Emerson

Emerson Branson 2000X ae User manual

Emerson

Emerson Alco Controls FSX Series User manual

Emerson

Emerson DanLoad 6000 Quick guide

Emerson

Emerson YARWAY Series Operation and maintenance manual

Emerson

Emerson TARTARINI RP Series User manual

Emerson

Emerson dixell XC650CX User manual

Emerson

Emerson 2202 Assembly instructions

Emerson

Emerson FloBoss 104 Quick guide

Emerson

Emerson FISHER 67 User manual

Emerson

Emerson Dixell XC645CX User manual

Emerson

Emerson Fisher EZR series User manual

Emerson

Emerson Fisher 1098-EGR User manual

Emerson

Emerson unidrive sp User manual

Emerson

Emerson Hytork XL Series User manual

Emerson

Emerson TARTARINI PS/80-1 User manual

Emerson

Emerson Dixell XM670K Wiring diagram

Emerson

Emerson Fisher T205 User manual

Emerson

Emerson dixell WING XW260K Wiring diagram

Emerson

Emerson Fisher 4194HA User manual

Emerson

Emerson Fisher Type 667 size 80 Manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual

3M MicroTouch EX113 reference guide