Elo TouchSystems E796783 User manual
© Copyright 2021 Elo Touch Solutions, Inc. 1
E796783 ELO-STA N D -SELF-SERVICE-15-22-COUNTERTOP
ASSEMBLY INSTRUCTIONS, ELO SELF SERVICE STAND
© Copyright 2021 Elo Touch Solutions, Inc. 2
Contents for Kit: E796783, ELO-STAND-SELF-SERVICE-15-22-COUNTERTOP
Hardware
Bag AQty.10 SCREW, M4X8, PAN-HEAD,
CROSS-RECESS
Bag BQty.4 SCREW, M4X8, FLAT-HEAD, CROSS-
RECESS
Bag CQty.3 SCREW, M3X8, PAN-HEAD,
CROSS-RECESS,
Bag DQty.4 SCREW, 3mm X8L,
THREAD-FORMING, PAN-HEAD
Bag LQty.4 SCREW, M4X6, PAN-HEAD,
CROSS-RECESS
Bag MQty.4 SCREW, M4X18, PAN-HEAD, CROSS-
RECESS
Bag NQty.4 SCREW, M4X12, PAN-HEAD, CROSS-
RECESS
Bag SQty.3 SCREW, M4X5, PAN-HEAD,
CROSS-RECESS
Bag UQty.1 DOUBLE-SIDED FOAM TAPE
Panel Hardware
Qty.2 SCREW, M6X14, PAN-HEAD, CROSS-
RECESS
Qty.2 BACKER BOARD SPACER
Qty.2 THUMB SCREW
Tie-wrap
Qty. 3
Head Assembly
Qty. 1
Countertop Base
Qty. 1
USB Hub
Qty. 1
Display Bracket,
Windows
Qty. 1
Display Bracket,
Android
Qty. 1
© Copyright 2021 Elo Touch Solutions, Inc. 3
Remove and save (2) screws on rear of Head, pull out
printer tray.
Add (2) screws from bag “A”; leave
~3mm (1/8”) gap for Head.
Gap
•Align slots on bottom rear of Head with (2) screws on base and slide
on stand.
•Add (4) screws from bag “B”.
•Tighten (2) previous screws at rear.
12
3
© Copyright 2021 Elo Touch Solutions, Inc. 4
Remove and save (2) screws, open cover of Display Bracket;
pivot out and fix prop.
Gap
45
Add (2) screws from bag “A”; leave ~3mm (1/8”) gap (for Display
Bracket).
Choose Android or Windows Display Bracket
For 15” or 22” monitor, use Android Display Bracket
Android Display Bracket shown above
© Copyright 2021 Elo Touch Solutions, Inc. 5
•Assemble Display Bracket onto Head.
•Position “A” for 15”, 22” in landscape.
•Position “B” for 15” in portrait
•Position “C” for 22” in portrait
•Add (2) screws from bag “A” at bottom holes.
6
A
B
C
•Assemble USB Hub.
•Add (2) screws from bag “S”; leave ~3mm (1/8”)
gap for USB bracket to slide on; tighten screws.
7
For Android, skip to step 13
For Windows, skip to step 18
For Android Slate, skip to step 8
© Copyright 2021 Elo Touch Solutions, Inc. 6
Add tie-wrap
8
Top Landscape
Add (2) screws from bag “L” to top 75mm VESA positions.
Leave ~3mm (1/8”) gap for mounting to display bracket.
Connect Slate Hub to Slate and attach cable cover before
proceeding.
•Route Slate Hub through display bracket and head.
•Mount Slate, add (2) screws from bag “L” to bottom 75mm VESA positions.
Add tie-wrap as shown.
•Tighten VESA screws to 12 in-lb (1.4 N-m).
Android Slate: Landscape
(For Portrait, skip to step 10)
9
Skip to step 12
Note: EMV Cradles are not compatible with
Android Slate in landscape orientation.
© Copyright 2021 Elo Touch Solutions, Inc. 7
10
Top Portrait
Add tie-wrap
Add (2) screws from bag “L” to top 75mm VESA positions.
Leave ~3mm (1/8”) gap for mounting to display bracket.
Attach Slate Hub and cable cover before mounting
displays on stand.
•Route Slate Hub through display bracket and head.
•Mount Slate, add (2) screws from bag “L” to bottom 75mm VESA positions.
Add tie-wrap as shown.
•Tighten VESA screws to 12 in-lb (1.4 N-m).
Android Slate: Portrait
11
If using an EMV Cradle, follow those instructions
before proceeding.
© Copyright 2021 Elo Touch Solutions, Inc. 8
Apply double-sided foam tape from bag “U” to back of Slate Hub and attach to back of head approximately
where shown. Route LAN cable through base. Connect LAN and power supply to Slate Hub.
12
Skip to step 25
© Copyright 2021 Elo Touch Solutions, Inc. 9
Add tie-wrap
13
Top Landscape
Cable
direction
Add (2) screws from bag “L” to top 100mm VESA positions.
Leave ~3mm (1/8”) gap for mounting to display bracket.
Remove cable cover(s) before mounting displays on stand.
•Mount I-Series, add (2) screws from bag “L” to bottom 100mm VESA
positions.
•Route power, LAN cables through bottom of stand head. Route USB Hub
cable or other USB if used.
•Tighten VESA screws to 12 in-lb (1.4 N-m).
Android: Landscape
(For Portrait, skip to step 15)
14
Skip to step 28
If using an EMV Cradle, follow those instructions
before proceeding.
© Copyright 2021 Elo Touch Solutions, Inc. 10
15
Top Portrait
Cable
direction
Add tie-wrap
Add (2) screws from bag “L” to top VESA positions. Leave
~3mm (1/8”) gap for mounting to display bracket.
Remove cable cover(s) before mounting displays on stand.
•Mount i-Series, add (2) screws from bag “L” to bottom VESA positions.
•Route power, LAN cables through bottom of stand head. Route USB Hub
cable or other USB if used.
Android: Portrait
16
Skip to step 25
If using an EMV Cradle, follow those instructions
before proceeding.
Other Elo TouchSystems Touchscreen manuals
Elo TouchSystems
Elo TouchSystems 1938L Parts list manual
Elo TouchSystems
Elo TouchSystems 1002L User manual
Elo TouchSystems
Elo TouchSystems 1928L Parts list manual
Elo TouchSystems
Elo TouchSystems 2200L User manual
Elo TouchSystems
Elo TouchSystems Entuitive 1746L Series User manual
Elo TouchSystems
Elo TouchSystems 1900L User manual
Elo TouchSystems
Elo TouchSystems 2240L User manual
Elo TouchSystems
Elo TouchSystems 1915L Parts list manual
Elo TouchSystems
Elo TouchSystems 1938L User manual
Elo TouchSystems
Elo TouchSystems ET1598L User manual
Elo TouchSystems
Elo TouchSystems ETXX87C-4SWA-1 Series User manual
Elo TouchSystems
Elo TouchSystems 1928L User manual
Elo TouchSystems
Elo TouchSystems 1537L User manual
Elo TouchSystems
Elo TouchSystems X-Series User manual
Elo TouchSystems
Elo TouchSystems 2243L User manual
Elo TouchSystems
Elo TouchSystems 90 Series User manual
Elo TouchSystems
Elo TouchSystems Entuitive 1825L Series User manual
Elo TouchSystems
Elo TouchSystems 3239L User manual
Elo TouchSystems
Elo TouchSystems 2799L User manual
Elo TouchSystems
Elo TouchSystems WALLABY PRO User manual
