EcoJam GDI-EXEJ300 User manual

Models: GDI-EXEJ300 / 301

User Guide

EcoJam

Quick Start

Open Cap on the back

of your EcoJam

Turn on the Main Power Switch

Press the Standby Button to

power on your EcoJam

Search your Bluetooth

Connection on your Smart Device

Pair & Play

Control Buttons

LED Status Indicators

Power, Battery, Bluetooth

LIMITED MANUFACTURER’S WARRANTY:

The EcoJam is covered by a 3 year limited

warranty that covers defects in workmanship

and / or materials for a period of 3 years from

original purchase date. This warranty does not apply

to any products which have been abused, neglected,

modified, or used for a purpose other than the one

for which they were manufactured. Please refer to

the above care and maintenance instructions for

suggested care details. The warranty is valid only

for the original owner who purchases the unit from

an authorized dealer. Transfers do not qualify for

warranty protection. Grace Digital reserves the right

to replace any out-of-stock or discontinued product

with a comparable product. Discontinued products

may not be available for warranty replacement.

Any contents are NOT covered by the limited

manufacturer’s warranty. Warranty terms may be

revised without notification at the discretion of the

manufacturer. Please visit www.ecoxgear.com for

additional product & warranty information.

EcoJam by ECOXGEAR,

a division of Grace Digital Inc., San Diego, California.

Designed in California. Made in China.

Patent Pending.

3) Dry unit completely before opening the cap. Do

NOT open the cap if wet or in a wet environment.

4) Do NOT apply excessive force to any surfaces

of the unit when wet or in a wet environment.

5) Do NOT use or store the unit in places with

high temperature.

6) AVOID prolonged exposure to ultraviolet radiation

(UV sunlight) and strong magnetic fields.

7) Periodically check the rubber seal for

premature wear.

8) Periodically clean the rubber with a soft moist

cloth and ensure no objects such as dirt, hair, or

sand are on the rubber seal ring. Do NOT use any

oily solvent or chemicals for cleaning.

9) Rinse off the unit with tap water after use in salt

water or swimming pool.

10) Power and / or charge the built-in rechargeable

battery for portable use by connecting the

USB cord to a computer USB connection or to

an AC outlet using the AC-to-USB cord 5V, 1A

power adapter intended for use with the unit.

11) Noise and audio distortion may occur when the

batteries are nearing end of charge.

12) Do NOT remove the built-in battery. Do NOT

remove the grill covers.

On/Off

Press the Standby Power Button once to

power ON/OFF.

IMPORTANT: Standby Power function

will NOT operate when the Master

Power is set OFF. Master Power Switch

under the cap on the back panel must

be set ON for Standby & your EcoJam

to operate.

Bluetooth

When turned ON, the EcoJam will power

on and search for your Bluetooth. Refer

to “Set Up Recommendations 1-2-3”

part for details.

Speaker Volume

Press to decrease or to increase

Speaker Volume.

NOTE: Some Bluetooth devices may

require to be manually set for maximum

audio level.

Control Buttons & Operations

Your EcoJam will beep to indicate when

maximum volume setting is reached.

Track Selection

Press button once to select Previous Song

track & Next Song track .

Play/Pause

Press button once to pause & play song

tracks (MUST be paired with Bluetooth).

Answer

Press button once to answer mobile calls

(MUST be paired with Bluetooth).

Battery Indicator

When connected with a USB cable to a

power source, the LED indicates a USB

connection and charging status.

RED: charge in process

GREEN: full charge complete

NOTE: There also are five LED battery level

indicators located on the top of the unit.

Each LED represents 20% of a charge.

Five full LEDs indicate a full charge.

You should never

1) Never charge your ECOXGEAR if you suspect

water has entered the device. Charging a device

with water inside could be potentially hazardous

and cause fire or a spark.

2) Never use your ECOXGEAR if you have dropped

it or thrown it against a hard surface which

may have destroyed the integrity of the speakers,

housings, or gaskets. In the event of a severe

impact to your unit please return the unit to Grace

Digital to review for potential damage.

3) Never open the auxiliary door in a water

environment. This could cause water to ingress

into the unit which could potentially be hazardous

and cause a fire or a spark.

4) Never connect a device to the auxiliary input jack

when in a water environment. The auxiliary jack

should only be used in a dry environment.

5) Never attempt to fix, repair your ECOXGEAR unit.

Please send it back to Grace Digital for any

assessments and repairs.

CARE, MAINTENANCE & PRECAUTIONS:

1) The unit is waterproof only when the cap is

properly closed.

2) Close the cap properly before use. If the unit

is placed in water without the cap properly

closed, water may enter into the unit and

void your warranty.

Please exercise care and good judgment when using

your ECOXGEAR speaker. Audio levels should be

appropriate to your environment, comply with all local

regulations, and always ensure that you can hear and

be aware of any potential hazards around you.

You should always

1) Use the ECOXGEAR speaker in accordance with

any music or noise rules and regulations.

2) Use the proper ECOXGEAR mounts if you intend

to mount the unit.

3) Properly seal the ECOXGEAR prior and after each

use when in humid or water environments to

avoid water damage to the internal components.

Salt water / air is particularly corrosive. Always

make sure that the gaskets are sealed when in salt

water environment and the unit properly rinsed

off after use.

4) Properly clean the ECOXGEAR and ensure the

gaskets have no sand, dirt, or water on them prior

to storage or removing the back cover.

5) Store your unit with all caps properly sealed to

avoid long term internal moisture damage inside

your unit.

6) Completely dry and clean your ECOXGEAR prior

to attempting to charge the unit.

7) Return the ECOXGEAR to Grace Digital if you

suspect water ingress into the unit or if the unit

has experienced a severe impact that may have

affected the integrity of the unit to take on water.

Set Up

Recommendations 1-2-3

Charge Your EcoJam

Before you power on your EcoJam

for the FIRST TIME, for best

performance, connect the USB Micro

port with a USB cable to a power

source and fully charge your EcoJam.

NOTE: Charge the unit until all 5 LED

battery level indicators are solid blue,

indicating a full charge.

Approximately 3 hours of charging

time is required from a low to a

full charge.

Power source options include a USB

connection to your computer or a

power outlet using a USB to AC

power adapter. It is recommended to

always use the USB cable included

with your EcoJam.

Power ON, Battery,

& LED Status Indicators

Once fully charged, press the Standby

Power Button on your EcoJam.

You will see the green LED light & you

will hear an ascending bell tone.

IMPORTANT: Ensure the Main

Power Switch, located in the back

compartment under the cap, is set in

the Upper ON position. If the switch

is in the Lower OFF position, your

EcoJam will not be able to turn on

using the Standby Button.

NOTE: The LED battery level

indicators are located on the top of

the unit. Each LED represents 20% of

a charge, with 5 full LEDs indicating a

full charge.

Audio playback time over Bluetooth

connection is approximately 12 hours

at 75% volume.

2WARNING: This product may contain chemicals

listed in Proposition 65 (www.oehha.ca.

gov/prop65/prop65_list/Newlist.html)

WARNING: EcoJam has a built-in Lithium battery.

The battery must NOT be used in or near

an open heat source or excessive heat.

WARNING: Danger of explosion if battery is

incorrectly replaced.

ATTENTION: Do NOT dispose of in a landfill. Contact

Grace Digital at www.gracesupport.com

or a certified recycling agent to dispose

of the unit.

ATTENTION: AC adapter is a device forming a part of

the main plug; therefore, an AC adapter

can always be readily disconnected from

AC socket-outlet.

SAFETY:

This product has a limited life span of use and should

be replaced when it shows obvious signs of wear.

Do not modify or remove any original component

parts of the speaker. Doing so could cause damage

to the unit allowing water to ingress. A unit with water

ingress should not be charged due to potential risk of

fire or shock.

Do not attempt to mount the unit except with the

approved ECOXGEAR mounts. Doing so could cause

damage to the unit allowing water to ingress. A unit

with water ingress should not be charged due to

potential risk of fire or shock.

can be submerged in up to 3 feet of water for 30

minutes without any damage. However, the speaker

is not intended for constant underwater use.

Always make sure the cap(s) / covers(s) are clean,

free from sand or debris, and correctly fitted. The

speaker will only meet IP67 ratings if all rubber seals,

gasket(s), and cover(s) / cap(s) are in place. If you

notice a muffling of audio after submersion, gently

shake the unit to clear excess water. If your speaker

is exposed to salt water, clean it thoroughly after use

with fresh water.

The USB cables, power adapters, and unit with an

improperly fitted cap are NOT waterproof.

To prevent fire or shock, do NOT attempt to charge

this unit if it is wet or you suspect water has entered

the unit. In this situation, please return the unit to

Grace Digital for a free assessment. If we have found

that the unit has carried water, we will repair or

replace the unit free of charge.

SAFETY ADVISORY & WARNING:

Read and follow all instructions.

Use only as intended.

CAUTION: Do NOT open to repair. A qualified

technician must carry out repair work.

ATTENTION: Do NOT charge while the unit is wet.

Towel dry the unit AND make sure all

connections are dry BEFORE plugging

in the charging connector. Failure to do

so may result in electrical damage to

the unit and may void the warranty.

Bluetooth Pairing & Your Audio

Connecting With Bluetooth: Connect

To Your Smart Device & Play Audio

When your EcoJam is turned on, the

blue LED light on the top panel will

flash rapidly indicating the unit is

ready to pair.

Turn on Bluetooth on your Bluetooth

device (Smart Device) and set the device

in pairing mode. Available Bluetooth

connections shall appear. Select the

ECOXGEAR speaker from the list of

discovered devices on your Bluetooth

device. Wait for a few seconds until the

connection is completed.

NOTE: Bluetooth connection feature

is found in the Settings section of

most mobile phones and other

Bluetooth enabled devices.

When the ECOXGEAR selection is

made and the Bluetooth connection

is completed, your EcoJam will

announce: “Bluetooth connected”

Once connected, select and play your

desired audio.

Pairing Mode: If the LED is not flashing

or if you wish to place your EcoJam in

pairing mode, press and release the

Bluetooth Button . Your EcoJam shall

announce “pairing ready” when ready to

pair to a new device.

NOTE: Your EcoJam shall sync &

wirelessly pair with most Bluetooth

enabled devices. The unit remembers the

last device paired and will automatically

search for previous connections when

the speaker is turned on or when a device

comes back into Bluetooth range. If

a connection is lost due to range, the

speaker will look to re-establish that

connection. If Bluetooth is turned off on

your Smart Device, the EcoJam may not

automatically look for the device.

RECOMMENDATION: If you are not

familiar with Bluetooth pairing for your

Smartphone, or other Smart Device, refer

to the User Guide for your Smartphone

FCC COMPLIANCE

STATEMENT & WARNING:

This device has been tested & found to comply with

the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. The device

generates, uses & can radiate radio frequency

energy & if not installed & used in accordance with

instructions may cause harmful interference to

radio communications. There is no guarantee that

interference will not occur in a particular installation.

If this device causes interference to radio or television

reception, try one of these measures: reorient or

relocate the receiving antenna, increase separation

between device & receiver, connect the device into

an outlet on a circuit different from that to which the

receiver is connected, consult a dealer or experienced

radio / TV technician for assistance. Changes or

modifications not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the device and / or void the

manufacturer’s limited warranty.

PRODUCT USE AND PROTECTION:

Read and follow all instructions.

Use only as intended.

The ECOXGEAR Bluetooth speaker is intended to

be used indoors or outdoors and in land or water

environments. The speaker has been tested to IP67

waterproofing standards, which means the speaker

User Guide

Models: GDI-EXEJ300 / 301

EcoJam

For Charging

AC (5V, 1A) USB Wall Outlet Power Adapter

AC (5V, 1A) USB Car Power Adapter

For Mounting

Suction Cup Mount (¼” mount)

Handlebar Mount Adapter (¼” mount)

Carabiner

USB Cable

Optional Accessories

EcoJam User Guide

to learn how to add and pair a new

device (EcoJam for instance) to your

Smartphone using Bluetooth.

Bluetooth Pairing & Connections:

Once paired, should you have an

issue switching between Bluetooth

connections between devices, open

the Bluetooth Section within the device

currently connected to the EcoJam and

delete the Bluetooth connection. The

EcoJam will then be available to pair

& connect to an alternate Bluetooth

enabled Smartphone / Audio Device.

AUDIO

AUX-IN

OFF

OUTPUT

INPUT

AUDIO

AUX-IN

OFF

OUTPUT

INPUT

To access the

connections,

turn the cap to

the LEFT so the

cap’s arrow point

lines up with the

unlocked symbol

along the back

edge of the unit.

Access Connections

Select Unlocked

Open Cap

Master Power Switch

& Connections

Power Source

3.7V, 2800mAh

Lithium Battery

USB Input /

Output

5V, 1A

Frequency Range

125Hz-18,000Hz

Play Time

12+ hours from

full charge at 75%

volume level

Charging Time

Approx. 3 hours

Charging Options

USB to AC adapter

or Computer

Unit Dimensions

Bluetooth

Bluetooth®CSR 4.1

Recommended

Storage (Battery)

Temperature

59°F / 15°C

Operating

Temperature

23°F to 104°F /

-5°C to 40°C

Waterproof /

Dust Rating

IP67

Mount

Attachment Point

¼” diameter

6.1”

5.0”

3.1”

This manual suits for next models

Table of contents

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide