Ecler EIC5154 User manual

Table of contents

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP

HP GL313AA - USB Speakers PC Multimedia quick start guide

eIC5154

IN-CEILING LOUDSPEAKERS

EN 54-24 Certified Loudspeaker

USER MANUAL

1

IMPORTANT NOTE

Congratulations! You are the owner of a carefully designed and

manufactured piece of equipment. We thank you for trusting in us and

choosing our eIC5154 EN 54-24 certified loudspeaker.

In order to get the optimum operation and efficiency from this unit, it is

VERY IMPORTANT - before you plug anything in - to read this document

very carefully and bear in mind all considerations specified within. We

strongly recommend that maintenance be carried out by our Authorized

Technical services. Keep this document for future references.

PRECAUTIONS

•Never use this unit in proximity to water or fire

•Do not expose the unit to water splashing

•Avoid placing the unit next to heat sources such as spotlights or

heaters

•The use of high voltage may cause electric shock or fire, take safety

precautions and use appropriate equipment when installing the device

•Install the device following manufacturer’s indications. An incorrect

installation may lead the device to fall down, causing a personal injury

or property damage

•The device must be installed in solid surface

•Do not manipulate the device with wet hands

•Do not pull the wires of an electric installation, it may cause fire or an

electric shock

•Do not remove the device when it is connected to the electric

installation. Before it, unplug the loudspeaker

•Do not install the device on vent covers

Warning: an inappropriate usage of the device could cause injury,

death or damage the apparatus.

2

PRODUCT OVERVIEW

ECLER eIC5154 is a cost-effective in-ceiling loudspeaker that features a design

which conforms to EN54-24 standard (Fire detection and fire alarm systems,

Voice alarms - Loudspeakers). It performs a 5”woofer.

KEY FEATURES

• Power selector @ 100V

6/3/1,5/0,75/0,38 W

• 5” woofer

• EN 54-24:2008 certified

APPLICATIONS

• Corporate and residential buildings

• Commercial premises

• Leisure centres

• Health and sports centres

• Meeting and conference rooms

• Auditoriums, museums

CERTIFICATIONS

• EN 54-24:2008

TECHNICAL DATA

Power selector @ 100V

6/3/1,5/0,75/0,38 W

Power selector @ 70V

3/1,5/0,75/0,38/0,19 W

Frequency response (-10 dB)

130Hz – 18kHz

Sensitivity 1W/1m

92 dB

Cutout size

Φ 157 mm

Dimensions

180x147 mm

Weight

1.2 kg

ACOUSTIC MEASUREMENT ENVIRONMENT

1. Environment: test room with noise lower than 50dB; temperature +25°C;

humidity 75%.

2. Processing: debug the test system according to CLIO debugging instruction.

3. Put the speaker in test box, right side up. Put the MIC of CLIO test system

facing down rightly to the center of the speaker driver. The distance between

the MIC and speaker driver keeps at 30cm.

4. Take the stored sample curve. The curve of the newly test speaker driver

should be the same as the sample curve (error range ±3dB).

5. Judge if the speaker is qualified or not according to the curve. If it is

qualified, continue the next test. If it is not qualified, do rework .

3

CONNECTION

Step 1: open the loudspeaker from the

clamp as shown in the picture.

Step 2: release the spring to open

the fireproof dome.

Step 3: pass the audio cable through

the wire clamp.

Step 4:

connect the loudspeaker

wire according the requirement in

the label.

Then install the

loudspeaker.

4

INSTALLATION

Step 1: measure the mounting hole. It

must be as the cutout size of the

device. Pass the cable through the

cable gland.

Step 2: loose the metal plates and

rise them up to the top. Insert the

back can into the mounting hole.

Step 3: slide down the metal plates

until they reach the surface. Tight

the fasteners inside the back can.

Step 4: connect the audio cable to

the loudspeaker’s terminal block.

Finally, insert the mounting springs

into the hooks and push the

loudspeaker into the back can.

5

CIRCUIT DIAGRAM

MECHANICAL DIAGRAMS

6

EXPLODED VIEW

REAR LABEL

7

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in

the design or manufacturing that may affect these product specifications.

Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 information@ecler.es www.ecler.com