Eaton BiWire Ultra User manual

0359-CPR-00419

2. Connection details

1a. Mounting base (IP21C) 1b. Mounting base (IP66C)

Table 1. Speciﬁcation

Technical data Effective September 2014

FXN009SB/EF009SB

FXN009SBWP/EF009SBWP

FXN009/EF009

FXN009WP/EF009WP

Wall sounder/beacon

Wall sounder

Supply voltage (BiWire alarm) 25.5~35 Vdc

Supply voltage (BiWire standby) 18~25.5 Vdc

Supply voltage (conventional) 18~35 Vdc

Cable size/type 0.5~2.5mm/FIRETUF, FP200

or MICC

Standby current (BiWire mode) <15μA

Current (high volume) Sdr only = 4.7mA, AV = 11mA

Current (low volume) Sdr only = 2.6mA, AV = 8.7mA

Sound output (high volume) 99 +/- 3dB(A) : All tones

Sound output (low volume) 89 +/- 3dB(A) : All tones

Operating temperature -25 to +70ºC (93% ± 3%RH)

Material ABS FR plastic

Environmental category Type A= IP21C/ Type B= IP66

Tones 3, See section 3

Flash rate 0.5Hz (N/A to FXN009(WP), EF009(WP))

Flash on period 60ms (N/A to FXN009(WP), EF009(WP))

Feature Value Feature Value

BiWire Ultra range:

Wall sounder/beacon IP66

Wall sounder IP66

(i) Drill required holes for

cable gland ﬁxing.

(iii) Fix to mounting surface

using two suitable screws.

(ii) Drill out the required

ﬁxing holes.

Drill position for rear

cable entry

Drill position for

glands

50 (IP33)

75 (IP66)

97 (IP66)

62 (IP33)

(i) Drill required holes for cable gland ﬁxing (top or bottom)

and ensure cables are correctly sealed for IP66 integrity.

(ii) Fix to mounting surface using four suitable screws.

Drill position

for glands

Use these four holes

to ensure IP66 integrity

1 2 3 4 5

Off

3. Switch position meaning

1, Sounder on/off (AV version only)

2, Volume high (Off)/low (On)

3, Tones

4, Tones

5, Mode: On = BiWire, Off = Conventional

Continuous: 3=On, 4=On (984Hz)

Bell: 3=On, 4=Off (1440Hz)

Alternating: 3=Off, 4=On (644/984Hz)

{

OUT IN

SCREEN ZONE OUT ZONE IN

+VE -VE +VE -VE

ZONE IN

ZONE OUT

Screen must be continuous along entire length of loop.

Compliance EN54-3; EN54-23:2010

(Conventional compatible)

25-12766-E

Note

All products meet minimum requirements of IP33C in

accordance with EN54-3.

www.acornfiresecurity.com

6a. Sounder assembly (WP)

5b. Dimensions5a. Sounder assembly

106

100110

110

(i) Clip sounder onto base.

(ii) Ensure cables do not

put stress on the PCB.

Key

Holes

To unlock use

key provided

(i) Location ribs must align on base and sounder.

(ii) Ensure cables do not

put stress on the PCB.

(iii) Bolt sounder to base.

Ribs

6b. Dimensions (WP)

4. VAD coverage area

Cross section

view (metres)

Product

3.2m

Technical data

Effective September 2014

FXN009SB/EF009SB

FXN009SBWP/EF009SBWP

FXN009/EF009

FXN009WP/EF009WP

Wall mounted 3D

view

Cross Section

plane

www.acornfiresecurity.com

This manual suits for next models

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual