Eaton A201 Manual

INSTRUCTION LEAFLET IL17053

Effective MAY 2011

Supersedes JUNE 1989

Instructions for A201, A211, A251

Size 6, 2 and 3 Pole Contactors,

Nonreversing or Reversing

THE CONTACTOR

A201 contactors are designed for the control of inductive or non-

inductive loads at voltages between 120 and 600, AC. The units are

suitable for mounting on either steel or insulated panels. All parts are

front removable.Contactors should be protected against short circuits by

branch circuit protective devices selected in accordance with the National

Electrical Code (NEC).

This motor controller is suitable for use on a circuit capable of delivering

not more than the current (rms symmetrical amperes) shown below in

circuits rated not more than the voltage shown in Table I.

INSTALLATION

This industrial type control is designed to be installed, operated, and

maintained by adequately trained workmen. These instructions do not

cover all details, variations, or combinations of the equipment, its storage,

delivery, installation, check out, safe operation, or maintenance. Care

must be exercised to comply with local, state, and national regulations,

as well as safety practices, for this type of equipment. See page 5 for

mounting dimensions and terminal information.

Mount the contactor on a vertical surface with the line terminals above

the load terminals. Once installed, the assembly should be checked

to ensure proper operation of the basic contactor mechanism and

accessory devices before power is applied.

The following list and the MAINTENANCE

instructions should be used as a guide:

a) The crossbar and springs must operate freely.

b) Auxiliary contacts and mechanical interlocks

must be properly installed and adjusted.

c) The proper operating coil must be installed and

properly connected.

d) The crossbar must be in position. The contactor

will not operate if the crossbar is rotated forward,

out of position.

e) The arc box must be in place. The contactor

must never be operated in a power circuit unless

the arc box is securely bolted in place.

f) The main contacts must have overtraveI and

spring force and move freely.

2EATON CORPORATION www.eaton.com

INSTRUCTION LEAFLET IL170053

Effective May 2011

Instructions for A201, A211, A251 Size 6, 2 and 3 Pole Contactors,

Nonreversing or Reversing

INSTRUCTION LEAFLET IL17053

Effective May 2011

EATON CORPORATION www.eaton.com

Instructions for A201, A211, A251 Size 6, 2 and 3 Pole Contactors,

Nonreversing or Reversing

4EATON CORPORATION www.eaton.com

INSTRUCTION LEAFLET IL170053

Effective May 2011

Instructions for A201, A211, A251 Size 6, 2 and 3 Pole Contactors,

Nonreversing or Reversing

INSTRUCTION LEAFLET IL17053

Effective May 2011

EATON CORPORATION www.eaton.com

Instructions for A201, A211, A251 Size 6, 2 and 3 Pole Contactors,

Nonreversing or Reversing

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Publication No. IL17053/ 001

May 2011

Eaton is a registered trademark of Eaton

Corporation.

All other trademarks are property of their

respective owners.

INSTRUCTION LEAFLET IL17053

Effective May 2011

Instructions for A201, A211, A251 Size 6, 2 and 3 Pole Contactors,

Nonreversing or Reversing

This manual suits for next models

Other Eaton Controllers manuals

Eaton

Eaton NFX9000 User manual

Eaton

Eaton DS7 Series User manual

Eaton

Eaton xComfort CJAU-01 Series User manual

Eaton

Eaton Cutler-Hammer ATC-300 User manual

Eaton

Eaton Cutler-Hammer Pow-R-Command JCI-100 Manual

Eaton

Eaton xComfort CRCA-00/04 Manual

Eaton

Eaton xComfort CJAU Series User manual

Eaton

Eaton Xcomfort CSAU-01/01 User manual

Eaton

Eaton PKE-SWD-32 Manual

Eaton

Eaton S611 Manual

Eaton

Eaton DE1-12 Series Manual

Eaton

Eaton Smart Home Controller 2.0 Operating and maintenance instructions

Eaton

Eaton Greengate PPS-5 User manual

Eaton

Eaton LMR PLUS User manual

Eaton

Eaton XC-CPU101 Series Manual

Eaton

Eaton xComfort CHAZ-01/12 User manual

Eaton

Eaton Cutler-Hammer S801TR User manual

Eaton

Eaton Power XL DG1 Series User manual

Eaton

Eaton ATC-900 User manual

Eaton

Eaton SVX9000 Series User manual

Eaton

Eaton ELC2 Series User manual

Eaton

Eaton CSAU-01 Manual

Eaton

Eaton xComfort Bridge Parts list manual

Eaton

Eaton FC18 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual