EasyIO FG-32 User manual

FG 32 DDC – pre release user guide – V1.4

FG32 pre-release user guide

FG 32 DDC – pre release user guide – V1.4

Document Change Log

Nov 2012

Document created.

Nov 2012

Added new chapter for restoring FG32 ack to default apps.

Added in new chapter for Changing IP address

Jumpers setting diagram updated on page 8. Watchdog jumpers settings added.

FG 32 DDC – pre release user guide – V1.4

Table of Contents

Introduction ............................................................................................................................................ 4

Device Info .............................................................................................................................................. 5

Device Specifications .............................................................................................................................. 5

Device Dimension ................................................................................................................................... 6

Input / Output Configurations ................................................................................................................ 7

Jumper Configurations ............................................................................................................................ 8

Connecting to FG32 Sedona DDC via Sedona work ench ...................................................................... 9

Install platform files and kits files ....................................................................................................... 9

Login Details .......................................................................................................................................... 12

Trou leshoot ......................................................................................................................................... 13

Checklist point 1. ............................................................................................................................... 13

Checklist point 2. ............................................................................................................................... 13

Changing IP address .............................................................................................................................. 14

Restoring FG32 ack to default apps .................................................................................................... 15

Technical Support ................................................................................................................................. 18

FG 32 DDC – pre release user guide – V1.4

Introduction

We are getting ready to release our new FG series of Controllers, starting with the EasyIOFG32 DDC

controller, product reference: EasyIO-FG-GC-32.

It is equipped with two 32- it Processors, the first in the Automation industry, with an ARM9 200

MHz Samsung processor, an ARM M3 Cortex for the I/O management and A-D processing, and also

with a Linux 2.6 OS for premium performance. Later in 2013 we will e adding Graphics capa ility to

serve up html templates that will e stored on the Micro SD card. BACnet and Mod us will also e

added in 2013. TCOM is availa le now and is encouraged for premium performance with Niagara.

•The Build ootloader can now e carried out remotely. No more manual service utton

needed is used.

•Firmware upgrading now can e done remotely and without any assistant.

•Firmware upgrading is via ftp client.

•In this user guide is just a pre-release internal use user guide.

Note: Information in this document is accurate at the time of documented. Actual information may

change/defer without notice.

This document in only intended for the eta testing process.

FG 32 DDC – pre release user guide – V1.4

Device Info

Model

EasyIO

Description EasyIO-FG32 Sedona series: 32 I/O Controller

Name FG32 DDC

Device Specifications

Mechanical

Dimensions 233mm x 124mm x 44mm (approx)

Material

UL Approved Plastic

Weight 700g

Electrical

Power Supply 24V AC +/- 5% or 24V DC +20%/-15%

Consumption TBC

Operating Temperature

32 to 150 Deg-F (0 to 65 Deg-C)

Storage Temperature -4 to 150 Deg-F (-20 to 65 Deg-C)

Operating Humidity 10% to 95% relative humidity non-condensing

Communication

(Details of EIA

485 will TBC

)

Physical Interface 1

(Port 1) EIA-485 (BUS A,B) Two-wire, Half Duplex

Modbus Baud Rate

Speed:(9.6K,

19.2k

, 38.4K, 57.6K, 115.2K bit/s), Data Bit:(

8 bits

Parity:(None, Even, Odd)

Bacnet Baud Rate

Speed:(9.6K,

19.2k

, 38.4K, 76.8K), Data Bit:(

8 bits

Parity:(None)

Physical Interface 2

(Port 2) EIA-485 (BUS A,B) Two-wire, Half Duplex

Modbus Baud Rate Speed:(9.6K, 19.2k, 38.4K, 57.6K, 115.2K bit/s), Data Bit:(8 bits),

Parity:(None, Even, Odd)

Bacnet Baud Rate Speed:(9.6K, 19.2k, 38.4K, 76.8K), Data Bit:(8 bits), Parity:(None)

Ethernet Support IP, TCP, UDP, ICMP, HTTP,FTP

Application Support Sedona (at the moment)and TCOM driver

FG 32 DDC – pre release user guide – V1.4

Device Dimension

Below are the dimensions for the EasyIO FG32.

Top View. Width including connectors are approx 124mm

Side view and back view.

Improve IN rail mounting for easy dismantling.

FG 32 DDC – pre release user guide – V1.4

Input / Output Configurations

Input/Output Configuration

Universal Input

Channels

Voltage 0 - 10V DC (+/-0.005V)

Current 0-20mA DC

Resistance 0 - 30K (+/-10 Ohm), 0 - 10K (+/-5 Ohm), 0 - 1.5K (+/-1 Ohm)

Thermistor

10K, 10K Shunt, 1K Balco, 1K Platinum : All (+/

0.01 Deg

UI as Digital Input Voltage Free Contact

Digital Output

8 Channels

Type Relay Contacts, SPST NO, 48VA at 24VAC, Pilot Duty

Universal

Output

Channels (12 bits resolution)

Type

Current: 0 - 20mA, 4 - 20mA (up to 800 Ohm load)

Voltage: 0 - 10V

Open Collector Output, Max Current Rating: 0.3A Max

FG 32 DDC – pre release user guide – V1.4

umper Configurations

: Current : On , EOL terminated

: Voltage

: Off , EOL Not terminated

: Open Collector

= Resistance Watchdog ena le =

= Voltage Watchdog disa le =

= Current

Universal Input

Jumper Settings

Universal

Output Jumper

EIA 485 Jumper

Settings

Watchdog

Jumpers Settings

FG 32 DDC – pre release user guide – V1.4

Connecting to FG32 Sedona DDC via Sedona workbench

In order to connect to the new EasyIO FG32 DDC, some files are needed. EasyIO FG32 has a different

sedona platform, files and kits. These kits are hardware dependent.

Follow the elow instructions efore connecting to the controller via Sedona Work ench.

Install platform files and kits files

Step 1

Get the required files from easyIO technical support at [email protected]

Step 2

Close the work ench.

Open sedona folder in the Niagara installation directory;

Niagara Version

Sedona director

Niagara Ax 3.5.xx

Niagara

niagara 3.5.xx

sedona

Niagara Ax 3.6.xx

Niagara

niagara 3.6.xx

sedonaBundles

sedona

1.1.xx\sedona\

Niagara Ax 3.7.xx

Niagara

niagara

3.7.xx

sedona

Step 3

Copy and merge the 2 folders that o tain from easyIO technical support.

The 2 folders are :platform and kits

For Niagara Ax 3.5 User go to step 4.

For Niagara Ax 3.6 User go to step 5.

For Niagara Ax 3.7User go to step 6.

FG 32 DDC – pre release user guide – V1.4

Step 4

For Niagara Ax 3.5.xx user. Drag and drop it in to the sedona root folder. Hit “Yes” on the pop up to

merge the files.

Step 5

For Niagara Ax 3.6.xx user. Drag and drop it in to the sedona root folder. Hit “Yes” on the pop up to

merge the files.

Other manuals for FG-32

Table of contents

Other EasyIO Controllers manuals

EasyIO

EasyIO FS Series Service manual

EasyIO

EasyIO FW Series Quick start guide

EasyIO

EasyIO FS-20 User manual

EasyIO

EasyIO FS32 User manual

EasyIO

EasyIO FG Series User manual

EasyIO

EasyIO FG-20 User manual

EasyIO

EasyIO FG-32 User manual

EasyIO

EasyIO FC 20 Service manual

EasyIO

EasyIO FC Series Quick start guide

EasyIO

EasyIO FT Series Service manual

EasyIO

EasyIO FC 20 User manual

EasyIO

EasyIO FW Series User manual

EasyIO

EasyIO FW-14 V3 User manual

EasyIO

EasyIO FW Series Service manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual