E-LOK 5 Series User manual
5-Series User Manual
1. Crop out done as per template.
2. Check rubber gasket installed correctly with
lugs pressed in tight. So proper seal around
backplate edge is created.
3. Ensure screw casing bolts and through bolts tightened.
4. Ensure power cable wire installed correctly and not bent or
crimped in door.
5. Check batteries installed in correct position.
Professionally Installed by:
PIN-Code: Date:
_________________________
____________ ____/____/____
5 - S e r i e s
Summary Check List:
For further details see pages 7-11
Top
Keep the included mechanical keys in a convenient place
such as an Elements Hardware 1236 Key Safe.
Replace the batteries when they have low voltage.
Read this User Manual carefully before installing your 5-
Series Smart Lock.
Use 1.5v Alkaline Batteries.
Please Note:
1236-BLK Shown:
5 - S e r i e s
Contents Page:
Pg 5.
Pg 6.
Pg 7.
Pg 8.
Pg 9.
Pg 10.
Pg 11.
Pg 12.
Pg 13.
Pg 14.
Pg 15.
Pg 16.
Pg 17.
Pg 18.
Pg 19.
Pg 20.
Pg 21.
Pg 22.
Pg 23.
Pg 24.
Pg 25.
Pg 26.
Pg 27.
Pg 28.
Pg 29.
Pg 30.
Pg 31.
Pg 32.
Pg 33.
Pg 34.
5-Series Body Dimensions
5-Series Deadbolt
5-Series Packing List
5-Series Specifications
External Installation
Internal Installation
Auto Lock Sensor
Auto Lock Sensor Cont.
FactoryReset: If you're admin
Factory Reset: other methods
First Set-Up
Bluetooth Unlock + PIN Code Management
RFID Card Management + Vague Code
RemoteUnlock + e-Key Management
Admin Passcode + Unlock Records
Battery Percentage + Lockset Clock
Passage Mode
Passage Mode + Remote
Extra lock settings 1
Extra lock settings 2
Extra lock settings 3
TransferringOwnership
Unlockwith Mechanical Key
E-LOKGateway Pg. 1
E-LOKGateway Pg. 2
E-LOKGateway Pg. 3
E-LOK Gateway additional notes
Maintenance Guide
Important Notes
Contact
5 - S e r i e s
5-Series Body Dimensions:
5
Top, E-LOK 505 body dimension.
Bottom, side view dimensions.
All measurements in millimeters
5 - S e r i e s
19
28
29
39
Latch Options:
Back set:
6
5 - S e r i e s
Adjustable backset to 60mm or 70mm to fit the most common size
doors in New Zealand. Simply twist the deadbolt from the center to
extend the backset.
Note: Please ensure the deadbolts is at exactly 60mm or 70mm, and not
in between.
5-Series Packing List:
Front Panel
QTY 1
Back Panel
QTY 1
User Manual
QTY 1
Mechanical Key
QTY 2
RFID Card
QTY 3
Screw 1
QTY 1
Gasket
QTY 2
Screw 2
QTY 2
Screw Casing
QTY 1
7
Cylinder Rod
QTY 1
5 - S e r i e s
Screw 3
QTY 2
Sliding Screw
QTY 1
Screw 4
QTY 2
Screw 5
QTY 1
Fixing Plate
QTY 1
Auto Lock Magnet
QTY 1
Specifications:
E-LOK 5-Series Smart Lock
E-LOK App
Black or Silver
PIN Code
RFID Card
E-LOK App
Mechanical Key
Unlimited
150 PIN Codes
200 RFID Cards
6V (4 x 1.5v AA Batteries)
— 10°C - 55°C
0% - 95%
33-58mm
Wooden Door, Aluminium Door.
See Page 5
60mm and 70mm Back Set
2 Year Mechanical and Electrical
2 Year
Exterior Rated IP 55
Product Name:
Operating Application:
Finish:
Unlock Methods:
Max Num. Locks on App:
Max Num. PIN Codes:
Max Num. RFID Cards:
Batteries:
Operating Temp:
Operating Humidity:
Suitable Door Thickness:
Suitable Door Types:
Product Size:
Available Deadbolt Sizes:
5-Series Residential Warranty:
E-LOK Gateway Warranty:
Weather Rating:
8
- Must be Alkaline
5 - S e r i e s
Step 1.
If you are retrofitting into anexisting 54mm
hole, this step may not be required. If you
are fitting the 5-Series into a new hole,
begin to cut the precise holes into your
door. Insert deadbolt and screw in.
Step 2.
Install sliding screw in screw case, and
install onto front panel.
Step 3.
Install rubber gasket onto the front panel
of the 5-Series.
Step 4.
Install cylinder rod. Ensure that the
cylinder rod is horizontal when installing
like the photo shown.
External Installation:
9
5 - S e r i e s
Step 5.
Install the exterior panel onto the door,
feeding the cable through to the interior
side.
Cylinder rod
Step 1.
Install the rubber gasket to the fixing plate.
Internal Installation:
10
5 - S e r i e s
Step 2.
Fix the fixing plate to the door and to the
exterior panel of the 5-Series. Insert screws
and tighten.
Step 3.
Connect the wire, place interior panel onto
the fixing plate, and insert screws and
tighten. Ensure the switch is set to the
unlocked position on the interior
Step 4.
Install the batteries, once again
making sure they are 4x AA Alkaline
batteries. Then, install battery cover
to complete the installation of your
5-Series.
This manual suits for next models
1
Table of contents
Other E-LOK Door Lock manuals
