Dynabrade X32V User manual

Disassembly Instructions – Mini Vacuum Dynorbital EXTREME

Models: X32V

Important: Disconnect sander from the air supply.

Notice: Use these instructions along with the tool manual. To avoid damage, use the

special repair tools designed for motor disassembly and assembly. Position 57092

Repair Collar around the housing. Fasten sander in vise with sanding pad facing up.

Do not over tighten sander in vise. Use 95263 Wrench (17 mm) to hold the balancer

shaft stationary.

To remove sanding pad, turn counterclockwise.

Motor Disassembly:

1. Use 56061 Lock Ring Wrench to remove 59415 Lock Ring.

 Turn counterclockwise.

2. Remove motor from housing.

 Remove 01024 O-Ring from 59412 Cylinder Sleeve Adapter.

 Remove lock ring 59415 from motor assembly

3. Fasten 96346 Bearing Separator (2") around 59411 Cylinder Sleeve. Place

bearing separator and motor in 96232 Arbor Press (#2) with counterweight

pointing down.

 Use arbor press and 5/16" or 8 mm diameter flat-end drive punch to push shaft

out of 01139 Bearing.

 Remove 59411 Cylinder Sleeve & 59412 Cylinder Sleeve Adaptor

4. Use 96214 Bearing Removal Tool to remove 01139 Bearing from 59405 Rear

Bearing Plate.

5. Remove vanes, rotor and key.

6. Use bearing separator and arbor press to remove the front bearing plate.

7. Fasten bearing separator between 58368 Bearing and the counterweight.

 Place bearing separator in arbor press with counterweight pointing down.

 Push shaft balancer from 58368 Bearing.

Motor disassembly completed.

Balancer Shaft and Bearing Disassembly:

1. Fasten counterweight in vise with hex of 59407 Balancer Shaft pointing up.

 Use a thin slot-blade screwdriver as a pick to remove 95613 Snap Ring.

(Next three views.)

Other Dynabrade Sander manuals

Dynabrade

Dynabrade Dynabug 57810 User manual

Dynabrade

Dynabrade 57900 User manual

Dynabrade

Dynabrade 10600 Installation instructions

Dynabrade

Dynabrade 51602 User manual

Dynabrade

Dynabrade 58040 User manual

Dynabrade

Dynabrade 52400 User guide

Dynabrade

Dynabrade 50304 User manual

Dynabrade

Dynabrade 52900 Manual

Dynabrade

Dynabrade 52520 User manual

Dynabrade

Dynabrade 10727 User manual

Dynabrade

Dynabrade 51570 Guide

Dynabrade

Dynabrade 10710 User manual

Dynabrade

Dynabrade Mini-Dynorbital Silver Supreme 69500 Guide

Dynabrade

Dynabrade 50348 User manual

Dynabrade

Dynabrade Dynabug 57811 User manual

Dynabrade

Dynabrade 50371 Installation instructions

Dynabrade

Dynabrade 57900 Guide

Dynabrade

Dynabrade 53521 Guide

Dynabrade

Dynabrade Dynorbital-Spirit 21000 User manual

Dynabrade

Dynabrade 50371 Installation instructions

Dynabrade

Dynabrade 51582 Guide

Dynabrade

Dynabrade Dynabug Model T 10485 User guide

Dynabrade

Dynabrade Dynorbital-Spirit 59000 Guide

Dynabrade

Dynabrade Dynorbital-Spirit 21000 User manual

Popular Sander manuals by other brands

Oliver

Oliver 6305 owner's manual

Jet

Jet 22-44 Pro-3 Operating instructions and parts manual

Makita

Makita M9204 technical information

Makita

Makita M9204 instruction manual

Craftsman

Craftsman 351.215131 Operator's manual

Clarke

Clarke Woodworker CBS1-5B Operation & maintenance instructions

Chicago Pneumatic

Chicago Pneumatic CP9778 Operator's manual

Nitto Kohki

Nitto Kohki BB-20 instruction manual

Ferm

Ferm FEOS-135 user manual

Unior

Unior 1510 Operating instruction

stayer

stayer ls1200 operating instructions

Jet

Jet JSG-96 Operating instructions and parts manual

Parkside

Parkside PDS 290 B2 Operation and safety notes

Status

Status XPA Series Original instructions

Clarke

Clarke EZ Sand Operator's manual

Craftsman

Craftsman 113.22521 owner's manual

Craftsman

Craftsman 113.225831 owner's manual

CLAS

CLAS OP 1429 manual