DSE RW Series User manual
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 1 Page: 1
DSE SRL - ITALY - WWW.DSE.EU
RW Series IP Cameras
Speed Dome PTZ IP network on WIFI
Installation and Configuration
How to connect the camera How to make the
connection in the network How to configure the cameraconnection in the network How to configure the camera
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 2 Page: 2
DSE SRL - ITALY - WWW.DSE.EU
Contents of this handbook
The range of RW series cameras is a range of IP cameras motorized wifi This manual explains how to connect the camera, how to
make the basic adjustments and how to configure the parameters for the network connection.
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 3 Page: 3
DSE SRL - ITALY - WWW.DSE.EU
Introduction
The IP speed dome cameras RW series are IP Network Cameras with compression
H265 / H264.
It is "NAKED" cameras that is with an essential hardware equipment. They are developed to work with
network video recorders NVR ONVIF facilities to be provided in combination to handle the recording and
remote access functions.
The units are connected to a LAN via RJ45 port as a computer or other network drives and images can be displayed on a PC using
Internet Explorer browser.
Unlike our other motorized ranges, this range has a built-in WiFi transmitter and can
work without wires.
The RW Series cameras fully support the ONVIF international protocol and are
compatible with any IP recording software or network video recorder (NVR) can handle
this standard.
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 4 Page: 4
DSE SRL - ITALY - WWW.DSE.EU
Technical data
See updated at tables:
https://www.dseitalia.it/Prod_telecamere_motorizzate_brandeggiabili_WIFI_per_esterno.h tm
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 5 Page: 5
DSE SRL - ITALY - WWW.DSE.EU
Installation
CONNECTIONS
The speed dome series RW cameras have only 2 connections: a mains socket and a power plug 12VDC
•NETWORK PORT RJ45 - RJ45 FEMALE connector to connect the LAN. This port is used to connect to a network switch. You
can use this wired connection if you're not using wifi. If you connect to the wifi network camera you can leave this unused port.
•12VDC - plug which connect the power supply 220VAC / 12VDC by at least 3A (included). These wifi cameras do not support
POE power.
•RESET - It 'a reset button that you can press and hold for 5 seconds to restore factory settings. RESET - It 'a reset button that you can press and hold for 5 seconds to restore factory settings.
VERIFICATION OF CONNECTIONS
First you must connect the power adapter to power the camera. After connecting the camera's power supply verifies that it performs an
automatic movement of
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 6 Page: 6
DSE SRL - ITALY - WWW.DSE.EU
rotation that certifies the proper nutrition. If the camera does not perform any movement occurs on the power.
After connecting the adapter you can connect the camera to a switch or router with a network cable. Check that the LEDs on the switch
corresponding to the port used start flashing. If verification remain off the network cable.
SD CARD
The cameras are equipped with an SD card slot inside which you can access by removing the outer cover. You can insert an SD card
up to 128GB to record board room.
MOUNTING THE CAMERA
The cameras are to be fixed to the wall with the supplied mounting bracket. The connecting cord extends through the bracket.
The camera housing is watertight and can be exposed to rain. The connections must be protected from the
weather.
The cable entry may be provided at the center of the bracket if the cable passage is walled. Alternatively, a lateral conduit entrance is
provided in the base of the bracket.
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 7 Page: 7
DSE SRL - ITALY - WWW.DSE.EU
WiFi configuration
These cameras are equipped with a wireless system configuration easy, plug and play, which allows you to connect the camera to
your wireless network in seconds, without even first set up the wired network, as you must do with our other models.
To use this wireless setup you need to download the app on your smartphone ESEECLOUD3 that are free for Android and iOS.
First thing connected with your mobile phone to WIFI You'd like to connect your camera. Then turn on the camera, it is not First thing connected with your mobile phone to WIFI You'd like to connect your camera. Then turn on the camera, it is not First thing connected with your mobile phone to WIFI You'd like to connect your camera. Then turn on the camera, it is not
necessary to connect the wired network.
When you first launch the APP you are prompted to create an account in the cloud server P2P. You can do this by entering an email
address or a phone number as the user name. Once the account is created, you can configure your camera by pressing the + button
and choosing INDEPENDENT CAMERA. Asked "The indicator flashes" choose YES because these cameras do not have a visible
indicator from the outside.
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 8 Page: 8
DSE SRL - ITALY - WWW.DSE.EU
The app automatically detects the presence of the camera thanks to the wifi signal that it generates in its factory setting. If you select
the camera you'll see that the app offers you the wireless networks to which you can connect the camera. You should find your WiFi
network to which you connect the camera. Choose your WiFi network and enter the password for network access. The camera will
automatically connect to your WiFi network. After the procedure, you can assign a name to the camera and set an access password,
which the factory is empty.
The camera reproduces some confirmation phrases using built-in speaker. After the procedure your camera is connected to your
wireless network and is ready to be reached by phone either locally or across the Internet.
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 9 Page: 9
DSE SRL - ITALY - WWW.DSE.EU
If you want to know which IP address has fetched your camera to the WiFi network you can use the computer IPCam Suite.
INSTALLATION MANUAL
IP CAMERAS SPEED DOME SERIES RW
Page: 10 Page: 10
DSE SRL - ITALY - WWW.DSE.EU
That's it, you are now ready to install the camera wherever you want, without wires.
Table of contents
Other DSE Security Camera manuals
