DSC Power 832 PC5010 User manual

Code Changes

Access Codes

Access codes are used to arm and disarm the system. There are 32 access codes available: 1 master code, 32

regular access codes, 2 duress codes and 2 partition master codes. Ask your installer for more information on

using the duress and partition master codes.

Only the Master Code can be used to program additional security codes and to change other system fea-

tures as well as to arm and disarm the security system. The Master Code will be supplied to you by your

installer. All keypad entries are made by pressing one key at a time.

NOTE: An access code can be a four or six digit number depending on how your installer has programmed

your system. Ask your installer for more information regarding access codes.

Programming Security Codes

Programming codes from an LED or LCD5501Z Keypad:

The Master Code

To program the Master Code, enter [*][5][current Master Code][40][new Master Code]. The Master Code must

be four digits unless otherwise indicated by your installer. Enter digits 0 through 9 only.

Press [#] 3 times to return to the Ready state.

Be sure to record your new Master Code on the “System Information” page in this booklet.

NOTE: We recommend that the factory default Master Code [1234] not be used.

Additional Codes

Up to 36 additional codes may be programmed. Codes 01-32 are regular access codes. Codes 33 and 34 are

duress codes. Codes 41 and 42 are the partition 1 and partition 2 master codes, respectively.

To program a new code:

Enter [*][5][Master code][code number][new access code]. The code number is a double-digit number from

01-34 or 41-42.

Access codes must be four digits long. Enter digits 0 through 9 only.

To exit code programming, press [#] 3 times.

If an access code already exists for the code number you have selected, it will be replaced by the new code.

To erase a code:

Enter [*][5][Master code][code number][*]. To exit code programming, press [#] 3 times.

This manual suits for next models

Table of contents

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual