DLI EPCR6 User manual

DLI EPCR6 User’s Guide

1.7.23.0

CONTENTS 1

Contents

1 Overview 2

2 Product features 3

3 Package contents 4

4 Basic setup and use 5

5 LCD and keypad 10

6 Emergency stop switch 14

7 Setup page 15

8 Scripting 23

9 Event notiﬁcation 44

10 Customization page 52

11 External APIs 53

12 Backing up settings 61

13 Firmware upgrade 62

14 Date/time 64

15 AutoPing 65

16 Energy monitor 69

17 Safety shutdown 76

18 Generic input/output 77

19 System log 83

20 Locking down the controller 84

21 Resetting settings to defaults 86

22 Speciﬁcations 87

23 Open source code 88

24 Technical support 89

25 Limited ﬁve year warranty 90

DLI EPCR6 User’s Guide: 1.7.23.0

2 CONTENTS

1 Overview

Congratulations on selecting the DLI Ethernet Power Controller, a smart rack-mount AC power switch.

Check out the main product features. Some more technical speciﬁcations are available as well.

Be sure to check the package contents when unpacking the unit, then follow the instructions for basic setup and

use if you are a ﬁrst-time user. The device is controllable using LCD and keypad, which have several modes. This

should allow you to access the basic device features. More advanced settings are located on the Setup page.

Ethernet Power Controller 6 can be:

• extended with user scripts;

•customized to add branding;

• accessed via a growing number of external APIs;

•upgraded to newer ﬁrmware versions.

It can be conﬁgured to:

•ping other devices and take action if they don't respond;

•shut down outlets to prevent equipment damage;

•perform input/output via external channels;

• monitor or ﬂexibly drive input/output pins;

• send notiﬁcations when certain events occur;

Ethernet Power Controller 6 utility functions include:

•monitoring and logging data from miscellaneous sensors;

• reading the system log

•setting date/time;

•backing up settings;

•locking down security-sensitive functionality;

•resetting settings to defaults.

The product features an Emergency stop switch which allows to manually shut down switched outlets physically.

The ﬁrmware is based on open-source code which is provided to give you the option to build totally custom ﬁrmware.

Please contact technical support in case of any problems.

We offer a limited ﬁve-year warranty on these units.

DLI EPCR6 User’s Guide: 1.7.23.0

2 Product features 3

2 Product features

Congratulations on selecting the DLI Ethernet Power Controller, a smart rack-mount AC power switch. Its features

include:

• 8 Switched Duplex Outlets + 2 Unswitched Outlets

Eight individual switch control circuits are provided with duplex outlets. Outlets are spaced for plugs and

adapters. Unswitched outlets are provided for "always on" devices. Switched outlets are metered in two

banks. Unswitched outlets are unmetered.

• Simple Web Interface

The internal web server is accessible from any browser. Simply enter an IP. Conﬁguration and control are

web-based.

• AutoPing™ Reboot

AutoPing continuously monitors an IP address. If a server, router, or other peripheral goes down, AutoPing

can automatically reboot it without user intervention. Several devices can be monitored simultaneously.

• Programmable LCD Display

A 2x16 LCD displays status for each outlet.

Custom messages can be displayed via user scripts.

• Multi-User Password Security

Multi-user authentication limits access to the power controller. The administrator selects which outlets each

user can control.

• Sequenced "On Timer"

A programmable delay timer allows outlets to be switched on in sequence, rather than simultaneously. Most

devices draw a surge of power when initially switched on. Using this timer, more equipment can share a single

circuit without overloads. Programmable scripts can be used to create customized power-up and shut-down

sequences with variable timing.

• MOV Surge Suppression

Dual 3600W metal oxide varistors clamp power surges and spikes, protecting attached devices.

• Scripting Language, Syslog, and Utilities

Lua scripting can be used to create custom control and reboot sequences, schedule periodic reboots, etc.

Internal and external event logs are provided.

• New Features

New features include improved power metering, a light sensor, CPU temperature sensor, longer battery life,

HTTPS, WiFi support, web power meters/charts and Lua scripting.

• Field Upgradeable Firmware

Firmware is ﬁeld upgradeable via Ethernet or WiFi.

DLI EPCR6 User’s Guide: 1.7.23.0

4 CONTENTS

3 Package contents

• Ethernet Power Controller 5 with NEMA 5-15 plugs and reversible rack ears attached.

• RP-SMA WiFi Antenna.

• Internal web server backup battery (shipped disconnected).

Please contact the freight carrier immediately if your package appears opened or damaged in transit. Call DLI at

(408) 330-5599 for tech support, service, and hardware upgrades.

DLI EPCR6 User’s Guide: 1.7.23.0

4 Basic setup and use 5

4 Basic setup and use

4.1 Factory defaults

The factory default network conﬁguration is as follows:

• wired network: ﬁxed IP address 192.168.0.100, netmask 255.255.255.0;

• wireless network: ﬁxed IP address 192.168.254.1, netmask 255.255.255.0.

You can log in with username admin (lower case) and password 1234. It is recommended that you change the

password. You will be reminded to do so by a big red banner on the top of each page.

To reset to factory defaults, gently press the reset-to-defaults button below the LCD to enter the reset menu, then

select a reset option.

4.2 Initial setup

Use these shortcuts if you are an experienced installer. We recommend reading the entire manual for ﬁrst-time

installation.

• Unpack. Save the carton.

• Attach line cords to 15A circuits.

• Attach an Ethernet cable from the controller to your LAN. Switch power on. If you are attached through a

switch, you may need to cycle switch power to establish a connection.

• Ping the default address 192.168.0.100 to conﬁrm that a network connection is established. If you don't

receive a response, proceed to the IP setup section below.

• Log in to the power controller using the default user name admin and the password 1234. Note: "admin" must

be entered in lower case.

• Click the Settings link to reach the conﬁguration page. Select the safest power-loss conﬁguration for your

installation: all OFF, all sequential ON or pre-powerloss state.

• Conﬁgure the power switch as described below. After each change, click Submit and wait for the page to

refresh before continuing.

Tip: A three-bulb electrical safety-tester is handy for conﬁguring the controller before attaching your equipment.

4.3 IP setup

If your network settings won't access the default IP, use a direct cable connection (temporarily bypass any switch or

router) and follow these steps to add a compatible static IP, such as 192.168.0.50.

4.3.1 Windows IP setup

Before adding an IP, close all programs and browsers. After the link is established, you can enable DHCP.

DLI EPCR6 User’s Guide: 1.7.23.0

6 CONTENTS

4.3.1.1 Locating IP settings

In Windows, the ﬁrst step is locating the network adapter TCP/IP properties. The procedure differs for each Windows

version:

Windows XP, 2000, 2003:

• Open Start / Control Panel / Network Connections.

• In "classic view", select Start / Settings / Control Panel /Network Connections.

• Right-click on Local Area Network Connection and select Properties.

• Proceed to step 2.

Windows Vista:

• Open Start, right click on Network, then on Properties.

• Double click Network and Sharing Center.

• Click Manage Network Connections. A Network Connections window appears.

• Right click on the network connection to the switch, i.e. Local Area Network.

• Proceed to step 2. Windows 7:

• Open the Start orb, click on Control Panel.

• Click View Network Status and Tasks, then Change Adapter Settings.

• Proceed to step 2

Windows 8:

• Mouse or swipe to the bottom right corner and select Settings.

• Select Control Panel.

• Select Network and Sharing Center.

• Change Adapter Settings.

• Right click on your connected network and select Properties.

• Proceed to step 2

4.3.1.2 Conﬁguring static IP

The second step is adding an IP such as 192.168.0.50. Temporarily disable DHCP while conﬁguring the switch.

• Select Internet Protocol TCP/IP V4 Properties and click Properties.

• Enter a compatible static IP such as 192.168.0.50.

• Click Apply and close windows.

• Ping the power switch to conﬁrm the connection.

• Point your browser to 192.168.0.100

• Log in.

Detailed instructions are at http://digital-loggers.com/ip_setup.html

DLI EPCR6 User’s Guide: 1.7.23.0

4 Basic setup and use 7

4.3.2 Mac OS X IP setup

• Turn AirPort off temporarily.

• Click the Apple logo, then System Preferences, then Network.

• Select Built-In Ethernet and then Conﬁgure.

• Under the TCP/IP tab, select Manually

• Enter an IP address such as 192.168.0.1 as shown:

• Make changes shown.

• Point a browser to 192.168.0.100 Log in.

Find Mac setup details at http://digital-loggers.com/mac_ip_setup.html

4.4 Windows IP conﬁguration (2000, 2003, XP, Vista)

If your default Windows settings won't access the controller, use a crossover cable and follow these steps to reach

the controller's IP:

1. Close network programs and browsers

2. Go to Network Settings ->Local Area Network.

3. Use the keyboard shortcut — type "ncpa.cpl" and click OK.

4. Right click on your LAN connection and choose "Properties".

5. Highlight "Internet Protocol" and click the "Properties" button.

6. Click the "Advanced" button.

7. Under the IP Address settings, click the "Add" button.

8. Enter a new IP, such as 192.168.0.10, and a subnet mask of 255.255.255.0.

9. Press the "Add" button; this new IP is added the list.

10. Close all windows for the conﬁguration to take effect.

11. Start your Browser and type 192.168.0.100 in the URL ﬁeld.

The default user name and password are "admin" (lower case) and "1234".

DLI EPCR6 User’s Guide: 1.7.23.0

8 CONTENTS

4.5 Basic switch operation

After power-up, the controller performs a sequence of self-tests to ensure reliability. The controller may then be

operated via a web browser. To access the controller, simply enter the IP address in the URL ﬁeld of your web

browser, then log in. You will be presented with a screen similar to this:

Sessionexpiresin00:29:48

Ethernet

Power

Controller

OutletControl

Setup

Scripting

EventNotification

Customization

ExternalAPIs

Backup/Restore

FirmwareUpload

Date/Time

AutoPing

EnergyMonitor

SafetyShutdown

SystemLog

Logout

Support

Help

Manual

FAQ

ProductInformation

DigitalLoggers,Inc.

Sourcecode

Version1.7.1.0/1.7.1.0

S/N:EPCR62203123456

Controller:DLIController

WedFeb2405:18:392016

IndividualControl

# Name State Action

BusA: 120.0V0.0A[000000.0kWh]

1 Outlet1 OFF SwitchON

2 Outlet2 OFF SwitchON

3 Outlet3 OFF SwitchON

4 Outlet4 OFF SwitchON

BusB: 120.0V0.0A[000000.0kWh]

5 Outlet5 OFF SwitchON

6 Outlet6 OFF SwitchON

7 Outlet7 OFF SwitchON

8 Outlet8 OFF SwitchON

MasterControl

AlloutletsOFF

AlloutletsON

Cyclealloutlets

Sequencedelay:3sec.

Main power controller page

Note that in this and many other pages, logical blocks can be collapsed by clicking in their right-hand corner,

and later expanded by clicking .

4.6 Common page layout

You can navigate the menu links to access the controller's features:

DLI EPCR6 User’s Guide: 1.7.23.0

4 Basic setup and use 9

Ethernet

Power

Controller

OutletControl

Setup

Scripting

EventNotification

Customization

ExternalAPIs

Backup/Restore

FirmwareUpload

Date/Time

AutoPing

EnergyMonitor

SafetyShutdown

SystemLog

Logout

Support

Help

Manual

FAQ

ProductInformation

DigitalLoggers,Inc.

Sourcecode

Branding

Mainmenu

Customlinks

Power controller menu

Custom links can be conﬁgured on the Admin page. The branding block can be customized on the Customization

page.

4.7 Switching outlets on and off

The outlet control page lets you control outlets. The sequence in which outlets will be switched on is determined

by settings on the Admin page. To switch an outlet on or off, simply click to the right of the outlet name or number.

Switching an outlet off is immediate. Switching an outlet on may be delayed if a different (or possibly even the

same) outlet was recently turned on. The delay acts to protect the device from simultaneous inrush currents and

limit cycling rate. You may also "cycle" a device which is connected to the controller. This feature is useful for

rebooting Ethernet devices which may interrupt the web link to the controller. Clicking "Cycle" switches power off,

waits a few seconds, and then switches power back on. This resets the attached device. You may also "cycle" all

outlets using the "Cycle all outlets" button on the bottom of the page. Depending on your web browser settings,

you may need to click the "refresh" button to update the on-screen status display after changing settings. A screen

refresh setting is provided on the Setup page.

4.8 Logout

Browser logout is automatic when a session is closed or after a time-out period. You can use a menu link to log-out

in advance.

DLI EPCR6 User’s Guide: 1.7.23.0

Table of contents

Other DLI Controllers manuals

DLI

DLI DLM-4 ZONE User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual