Directed Electronics AM1 User manual

Model AM1

OOwwnneerr’’ssGGuuiiddee

lliimmiitteeddlliiffeettiimmeeccoonnssuummeerrwwaarrrraannttyy

Directed Electronics (“Directed”) promises to the original purchaser to repair or

replace (at Directed’s election) with a comparable reconditioned model any Directed

unit (hereafter the “unit”), excluding without limitation the siren, the remote trans-

mitters, the associated sensors and accessories, which proves to be defective in work-

manship or material under reasonable use during the lifetime of the vehicle provided

the following conditions are met: the unit was purchased from an authorized Directed

dealer; the unit was professionally installed and serviced by an authorized Directed

dealer; the unit will be professionally reinstalled in the vehicle in which it was orig-

inally installed by an authorized Directed dealer; and the unit is returned to Directed,

shipping prepaid with a legible copy of the bill of sale or other dated proof of pur-

chase bearing the following information: consumer’s name, telephone number and

address; the authorized dealers name, telephone number and address; complete prod-

uct description, including accessories; the year, make and model of the vehicle; vehi-

cle license number and vehicle identification number. All components other than the

unit, including without limitation the siren, the remote transmitters and the associ-

ated sensors and accessories, carry a limited one-year warranty from the date of pur-

chase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR

WITHOUT PROOF OF PURCHASE WILL BE DENIED. This warranty is non-transferable and

is automatically void if: the original purchaser has not completed the warranty card

and mailed it within ten (10) days from the date of purchase to the address listed on

the card; the unit’s date code or serial number is defaced, missing or altered; the unit

has been modified or used in a manner contrary to its intended purpose; the unit has

been damaged by accident, unreasonable use, neglect, improper service, installation

or other causes not arising out of defects in materials or construction. The warranty

does not cover damage to the unit caused by installation or removal of the unit.

Directed, in its sole discretion, will determine what constitutes excessive damage and

may refuse the return of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT

LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABIL-

ITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON-INFRINGEMENT OF

INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER

ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY,

OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED DISCLAIMS

AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES

INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS,

INCLUDING THIS UNIT, ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT

OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF

THE AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY

LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,

DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR COSTS FOR

MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL

DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECT-

ED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF

CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY

AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST

DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PUR-

CHASE PRICE OF THE UNIT. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES

WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCI-

DENTAL DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF

EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE.

NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WAR-

RANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO THE CONDITIONS AS

DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT HAS NOT BEEN PURCHASED

FROM DIRECTED, OR AN AUTHORIZED DIRECTED DEALER, OR IF THE UNIT HAS BEEN

DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE, ACTS OF GOD, NEGLECT,

IMPROPER SERVICE, OR OTHER CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR

CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the

exclusion or limitation of incidental or consequential damages. This warranty gives

you specific legal rights and you may also have other rights that vary from State to

State.

This warranty is only valid for sale of product(s) within the United States of America.

Product(s) sold outside of the United States of America are sold “AS-IS,”and shall

have NO WARRANTY, express or implied. This product may be covered by a Product

Performance Guarantee (“PPG”). See your authorized Directed dealer for details of the

plan or call Directed Customer Service at 1-800-876-0800.

Make sure you have all of the following information from your authorized Directed

dealer: A clear copy of the sales receipt, showing the following:

o Date of purchase

o Your full name and address

o Authorized dealer’s company name and address

o Type of alarm installed

o Year, make, model and color of the automobile

o Automobile license number

o Vehicle identification number

o All security options installed on automobile

o Installation receipts p/n 920-0030 06-06

limited lifetime consumer . . . . .

warranty . . . . . . . . . . . . . . . . . . . .i

trademarks and copyrights . . . . .1

what is included . . . . . . . . . . . . .2

important information . . . . . . . . .2

using your system . . . . . . . . . . . . .3

manual (active) arming . . . . . .3

automatic (passive) arming . . .3

armed protection . . . . . . . . . . .4

disarming . . . . . . . . . . . . . . . .5

disarming without a . . . . . . . .

transmitter . . . . . . . . . . . . . . . .5

valet®mode . . . . . . . . . . . . . . .6

remote valet®. . . . . . . . . . . . . .6

panic mode . . . . . . . . . . . . . . .7

nuisance prevention circuitry®. . .7

diagnostics . . . . . . . . . . . . . . . . . .9

arming diagnostics . . . . . . . . . .9

disarming diagnostics . . . . . . .9

table of zones . . . . . . . . . . . .10

rapid resume logic . . . . . . . . . . .10

programming options . . . . . . . .11

programming settings . . . . . .11

glossary of terms . . . . . . . . . . . .13

notes . . . . . . . . . . . . . . . . . . . . . .14

Contents

Trademarks and copyrights

Code-Hopping™, Directed®, Doubleguard®, FailSafe®, Nuisance Prevention Circuitry®, NPC®,

Silent Mode™, Soft Chirp®, Stealth Coding™, Stinger®, Valet®, and Warn Away®are all

Trademarks or Registered Trademarks of Directed Electronics, Inc.

What is included

zControl module and harness

zA Stinger®dual stage shock sensor (on-board the control

module)

zPre-wired Valet®switch with integrated status LED

zFailsafe®Starter Kill relay (if equipped)

Important information

Congratulations on the purchase of your security system. Due to the

complexity of this system, it must be installed by an authorized dealer

only. Installation of this product by anyone other than an authorized

dealer voids the warranty. All dealers are provided with a preprinted

dealer certificate to verify that they are authorized.

By carefully reading this Owner's Guide prior to using your system, you

will maximize the use of this system and its features.

You can print additional or replacement copies of this manual by

accessing the Directed web site at www.directed.com.

Using your system

Manual (active) arming

The factory default is active arming. In this mode you can activate, or

arm, the system by locking the doors with your factory keyless entry

transmitter. When the system arms, you will hear a short horn honk and

see the parking lights flash once. While the system is armed, the status

LED will flash about twice a second, showing that the system is active-

ly protecting your vehicle. If you hear a second short horn honk after

arming, and see the status LED flashing in groups, see Diagnostics sec-

tion (page 9). This extra short horn honk is called Bypass Notification.

Automatic (passive) arming

The system also can be programmed to arm itself automatically (called

passive arming). If the system is programmed for passive arming, it will

automatically arm 30 seconds after the ignition is turned off and the

system “sees” you leave the vehicle by opening and closing a door.

Whenever the system is in its 30-second passive-arming countdown,

the status LED will flash twice as fast as it does when the system is

armed. When the system arms, you will hear a short horn honk and the

parking lights will flash once. The doors lock (if connected and pro-

grammed for passive locking).

nnoottee::Passive arming may qualify for a higher insurance dis-

count. Check with your insurance agent

nnoottee::If the ignition is turned on within 60 seconds of arming

the system, the system will automatically disarm.

Armed protection

When armed, your vehicle is protected as follows:

zLight impacts to your vehicle will trigger the warn away sig-

nal. The system will pulse the horn and flash the parking

lights for a few seconds.

zHeavy impacts will trigger the system. The triggered

sequence is 30 or 60 seconds of constant horn honking and

flashing parking lights.

zIf a door is opened, the system will immediately start short

pulsing the horn and flashing the parking lights. Three sec-

onds later, the horn output changes to longer horn honk

pulses. This progressive response gives you time to disarm

the system with your transmitter if you inadvertently open

the door while the system is armed, while still providing

instant response (even if the door is immediately closed).

zTurning on the ignition key triggers the same progressive

response as opening a door.

zIf equipped, the starter interrupt prevents the vehicle’s

starter from cranking.

nnoottee::The vehicle may already be equipped with a starter kill

relay from the factory.

nnoottee::If programmed for instant trigger, the horn will output

full trigger response after the door has been opened (see

Programming Options)

nnoottee::If any protected entry point (such as a door or a switch-

protected trunk or hood) is open, the system will not passively

arm. Additionally, each time a sensor is triggered during the

arming countdown, the 30-second countdown starts over.

Disarming

To disarm the system, unlock the doors using your factory keyless trans-

mitter. The horn will sound twice, and the parking lights will flash

twice. If the horn sounds either four or five times when disarming, refer

to the Diagnostics section of this guide. This is called Tamper Alert.

Disarming without a transmitter

This feature allows you to override the system without the transmitter

should it be lost, damaged or disabled. To do this, you must have the ve-

hicle's ignition key and know where the integrated LED/Valet®switch is

located. The Valet®switch is activated by pressing the LED status indicator.

Turn the ignition to the “run”position.

Press and RELEASE the integrated

LED/Valet®switch, within 10 seconds.

After a few seconds the LED will stop

flashing and the vehicle should start. If it does not, you may have waited

too long. Turn the ignition off and try again.

nnoottee::The setting for the number of times the integrated

LED/Valet® switch must be pressed is set in the

Programming Section of this guide.

DRW-35

Integrated

LED/Valet®switch LED status indicator

Valet®mode

You can prevent your system from arming, by using Valet®Mode. This

is very useful when washing the vehicle or having it serviced. In Valet®

Mode, the system will not arm, even with the transmitter, but all con-

venience functions (door locks, trunk release, etc.) will work normally.

To enter or exit Valet®Mode with the integrated LED/Valet®

switch:

Turn ignition to “on” position, then

turn to “off” position. Press

and release the integrated

LED/Valet®switch within 10

seconds. The status LED will

light steady if you have entered Valet®Mode. To exit Valet®Mode,

repeat the steps above. The LED will turn off when exiting Valet®Mode.

Remote valet®

Remote Valet®is a convenient feature that makes bypassing the securi-

ty system easier. This feature makes it possible to exit or enter Valet®

Mode using your factory keyless transmitter.

1. Open any door.

2. Press LOCK on the transmitter.

3. Press UNLOCK on the transmitter.

4. Press LOCK on the transmitter.

The status LED will stay on if you have entered Valet®Mode, and it will

go out if you exited Valet®Mode.

DRW-35

Panic mode

If you are threatened in or near your vehicle, you can attract attention

by triggering the system with your transmitter! If your factory keyless

transmitter does not have a panic button, this system can be pro-

grammed to enable a panic feature (refer to the Programming

Options).

If enabled, just press the lock button on your factory keyless transmit-

ter twice within three seconds to enter Panic Mode. The horn will

sound and the parking lights will flash for 30 seconds. To stop Panic

Mode at any time, press the unlock button on your factory transmitter.

Nuisance prevention circuitry®

Your system has Nuisance Prevention Circuitry®(NPC®). This circuitry

prevents annoying repetitive trigger sequences due to faulty door pin

switches or environmental conditions such as thunder, jackhammers,

airport noise, etc.

nnoottee::The system can also be programmed so that pressing

the lock button twice within three seconds will activate an

optional accessory. If the unit is programmed to activate an

optional accessory, Panic Mode will not be operational.

nnoottee::The remote Valet

feature will not work with all factory

keyless entry systems. Some keyless entry systems do not

work with a door open.

Other manuals for AM1

Table of contents

Other Directed Electronics Car Alarm manuals

Directed Electronics

Directed Electronics 100 ESP User manual

Directed Electronics

Directed Electronics MERLIN 2000 User manual

Directed Electronics

Directed Electronics K10 User manual

Directed Electronics

Directed Electronics 411R Series User manual

Directed Electronics

Directed Electronics VIPER 3203 User manual

Directed Electronics

Directed Electronics Hornet 563T User manual

Directed Electronics

Directed Electronics PYTHON 333 User manual

Directed Electronics

Directed Electronics VIPER 5701 User manual

Directed Electronics

Directed Electronics G312R Quick start guide

Directed Electronics

Directed Electronics Viper 350HV User manual

Directed Electronics

Directed Electronics 3100 User manual

Directed Electronics

Directed Electronics Viper 5601 User manual

Directed Electronics

Directed Electronics Viper 350HV User manual

Directed Electronics

Directed Electronics Viper 211HV User manual

Directed Electronics

Directed Electronics Python 990 User manual

Directed Electronics

Directed Electronics 544T User manual

Directed Electronics

Directed Electronics 300 ESP User manual

Directed Electronics

Directed Electronics 625 User manual

Directed Electronics

Directed Electronics SmartStart 5000-series User manual

Directed Electronics

Directed Electronics Python 880XP User manual

Directed Electronics

Directed Electronics PYTHON 210P User manual

Directed Electronics

Directed Electronics 553S User manual

Directed Electronics

Directed Electronics AM2 User manual

Directed Electronics

Directed Electronics 200 User manual

Popular Car Alarm manuals by other brands

Clifford

Clifford 3606X owner's guide

Ultra Start

Ultra Start 2500M SERIES install guide

Ultra Start

Ultra Start 650 Series owner's manual

Audiovox

Audiovox Prestige Platinum+ APS-511C owner's manual

Sparkrite

Sparkrite SRA8 Guide

Viper

Viper 4708V owner's manual

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Installation and maintenance manual

Falcon

Falcon Predator XL3 Installer manual

Audiovox

Audiovox Auto Security XR91 Programming guide

Clifford

Clifford Sabre II owner's manual

CrimeStopper

CrimeStopper CS-8717 Wiring diagram

Ultra Start

Ultra Start 450 SERIES install guide

Scytek electronic

Scytek electronic Vectra X3 product manual

Excalibur

Excalibur AL-1860-EDPB Operation guide

Clifford

Clifford CYBER 2 owner's manual

Gemini

Gemini 7057 user manual

FlashLogic

FlashLogic FLRSBA PRESTIGE Product guide

Magicar

Magicar FAI-440 manual