Digital Watchdog DWC-D4365T User manual

ABOUT MANUAL

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

PIXIM Indoor Dome Camera

DWC-D4365T

07062012

PRECAUTIONS

FCC COMPLIANCE

Do not open or modify.

Do not open the case except during maintenence and installation, for it may be dangerous and can

cause damages.

Do not put objects into the unit.

Keep metal objects and flammable substances from entering the camera.

It can cause fire, short-circuits, or other damages.

Be careful when handling the unit.

To prevent damages, do not drop the camera or subject it to shock or vibration.

Do not install near electric or magnetic fields.

Protect from humidity and dust.

Protect from high temperature.

Be careful when installing near the ceiling of kitchen or a boiler room, as the temperature may rise

to high levels.

Cleaning:

To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.

Mounting Surface:

The material of the mounting surface must be strong enough to support the camera.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference, when the equipment is operated in a residential environment. This equipment

generates, uses, and radiates radio frequency energy; and if it is not installed and used in accordance

with the instruction manual, it may cause harmful interference to radio communications.

WARNING: Changes or modifications are not expressly approved by the manufacturer.

TABLE OF CONTENTS

Introduction

Installation

Module OSD Menu

Troubleshooting

Warranty Information

Specifications

Features

Parts and Descriptions

Dimensions

Inside the Box

Mount Installation Instructions

Connecting to Monitors

Adjusting the Camera Lens

8-9

10-11

14-25

27-28

29-30

Adjusting the 3-Axis Gimbal 13

FEATURES*

1/3” PIXIM Nightwolf CMOS Sensor

690 Horizontal TV Lines

3.3~12mm Varifocal Auto Iris Lens

TDN (True Day and Night/ TDN5)

Powerful Wide Dynamic Range

3D DNR (3D Digital Noise Reduction)

8X Digital Zoom

Ultra Low Light Sensitivity

Smear Cancelation

Low Power Consumption

Star-Light (Super Low Light Technology)

AGC/ BLC/ AWB

Programmable Privacy Zones (6) & Motion Detection

OSD Menu with Built-In Joystick

UTP & RS485 Built-In

Auto Sensing 12VDC or 24VAC with Line Lock

Secondary Video-BNC Output

PART & DESCRIPTIONS*

Lens

3UTP

4RS-485

Power Input Connctor

12VDC/24VAC Dual Voltage

Primary Video BNC-Output Connector

Secondary Video-BNC

Output Connector

Camera Control Board

Bubble Dome Cover

Upper Case

Mounting Screws

NO IR IR

DIMENSIONS IN MILLIMETERS (IN)*

Surface Mount

(3.5”)

108(7.09”)

Top View

40.5(1.59”)

56.3(4.25”)

96.8(3.81”)

108(4.25”)

INSIDE THE BOX*

Included with Snapit Indoor Dome Camera

User Manual

Mounting Template

2 Machine Screws and 2 Dry Wall Anchors

Secondary Video-BNC Cable

SURFACE MOUNT INSTALLATION INSTRUCTIONS*

Squeeze the sides of the

camera and separate the

camera module from the

dome cover.

Use the camera’s mounting

template or your camera to

mark the holes as required.

Drill holes into the drywall and

insert the drywall mounts into

the holes.

Pull wires through and make

connections. Then, mount the

camera to the wall using the

included machine screws.

1 2 3

Adjust the camera lens

position by using the 3-Axis

Gimbal.

Snap the dome cover over

the camera module.

5 6

WALL MOUNT INSTALLATION INSTRUCTIONS*

Check to see all parts are in

the box.

Use the mount to mark the

pilot holes that are required.

Drill holes into the drywall and

insert the drywall mounts.

Secure the wall mount to the

wall using the mounting

screws.

Attach the base of the camera

to the wall mount with the

smaller machine screws.

Adjust the camera lens, and

snap the dome cover over

the camera module.

1 2 3

4 5

CONNECTING TO MONITORS*

Power Connection: 12VDC & 24VDC Dual Voltage (Auto Polarity Detection and Protection)

All cameras are equipped with a second video output for on-site configuration.

Use the diagram below to connect to a Monitor or CRT Monitor properly.

DC 12V / AC 24V

CCTV Monitor

Monitor

300.0mm(11.8”)

Second Video Output

NO IRIR

Other manuals for DWC-D4365T

Other Digital Watchdog Security Camera manuals

Digital Watchdog

Digital Watchdog DWC-MV82WiATW User manual

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIRW User manual

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS DWC-D3853WTIRW User manual

Digital Watchdog

Digital Watchdog Star-Light DWC-V7253 User manual

Digital Watchdog

Digital Watchdog Star-Light Plus HD over Coax... User manual

Digital Watchdog

Digital Watchdog DWC-D4583WTIR User manual

Digital Watchdog

Digital Watchdog Star-Light Plus Universal HD over Coax... User manual

Digital Watchdog

Digital Watchdog Star-Light DWC-D4783WD User manual

Digital Watchdog

Digital Watchdog MEGApix DWC-MD72i4V User manual

Digital Watchdog

Digital Watchdog V1372TIR Series User manual

Digital Watchdog

Digital Watchdog DWC-D1363D922 Guide

Digital Watchdog

Digital Watchdog DWC-B362DIR User manual

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PZ21M69T User manual

Digital Watchdog

Digital Watchdog DWC-PB753WTW User manual

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS DWC-V7553WTIR User manual

Digital Watchdog

Digital Watchdog MC355T User manual

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-V6563WTIR User manual

Digital Watchdog

Digital Watchdog Starlight D1363D User manual

Digital Watchdog

Digital Watchdog DWC-LPR550 User manual

Digital Watchdog

Digital Watchdog MEGApix DWC-MV94WiAT User manual

Digital Watchdog

Digital Watchdog DWC-D3563D User manual

Digital Watchdog

Digital Watchdog MEGApix DWC-MVA5Wi28T User manual

Digital Watchdog

Digital Watchdog DWC-B8553TIR User manual

Digital Watchdog

Digital Watchdog DWC-B1362TIR650 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications