Denver SW-500 User manual

Instruction Manual

Smart Watch

SW-500

www.denver-electronics.com

Before operating this product, please read this instruction

manual carefully and completely.

Feature

•1.3-inch IPS full screen display

•Multi-Sport Mode (Running, Walking, Hiking,

Biking, Indoor Run & Trail Run)

•Track your sport performance

•Provide comprehensive GPS location

•Digital Crown integrated, rotate it to change the

menu easily

•Built-in HR sensor, monitor your heart rate and

set your heart rate zone

•Built-in altimeter, barometer & temperature

•Monitor your daily activity and sleep

•Built-in sedentary reminder

•Synchronize phonebook, answer or reject calls

from your wrist

•Display SMS, emails, calendar events and social

media activity

•Smart wake-up, raise or shake your arm to wake

up the device

•Remote control music playback, remote capture

photo on your Smartphone

•Built-in loudspeaker and Microphone

•Built-in 350mAh Li-poly battery, up to 5-7 days

standby time

•Fully compatible with iOS7 or above and Android

4.4 or above

•Different design styles for your different

occasions and preferences

Overview

Smart Watch

1. MIC

2. Barometer sensor

3. Touch screen

4. Shortcut key for

Sport mode

5. Digital crown

6. Power button

7. Speaker

8. Heart rate sensor

9. POGO-Pin Charging

terminals

POGO-Pin Charger

10. POGO-Pin

11. Micro-USB port

Charging

•If you use a Power Adaptor (Not included), Power

Adaptor current is: 5V, 500mA.

•It takes 2-hours to fully charge the smart watch,

please follow steps below to charge.

1. Put the charging cradle

beneath the watch. Make

sure the POGO-pins on the cradle

fit correctly onto the charging

terminals on the back of smart

watch.

2. Connect the charging cradle

with the USB cable

3. Plug the big end of the USB cable to a power

source

Charging when power off Charging when power on

How to use

•Turn on: Hold press power button in 3 seconds

•Go to main menu: Swipe from right to left on watch

face interface

•Switch main menu: Swipe up/ down

•Confirm: Tap the icon or press digital crown

•Exit: Swipe from left to right

•Return to watch face interface: Short press power

button on any interfaces

•Sport mode shortcuts: Press the upper button

•Check notifications: Swipe from left to right on

watch face interface

•Switch submenu/ shortcuts: Swipe up/ down or

Turn digital crown

•Turn off: Hold press power button in 3 seconds

How to calibrate the sensor

In the settings inside, there is a “Sensor calibration”

option.

If you find the temperature, altitude, pressure of the

watch are wrong, you can calibrate the sensor to

make the watch display more accurate. (We will make

sensor calibration for each device before packing

when mass production)

The steps to calibrate the sensor：

Temperature: Settings-> Sensor calibration->

Temperature, set up the correct temperature value

and click “OK”.

Pressure: Settings-> Sensor calibration-> Pressure,

set up the correct pressure value and click “OK”.

Altitude: Settings-> Sensor calibration-> Altitude, if

you select “Manual”, set up the correct altitude

value and click “OK”. If you select “Use GPS”, wait

for GPS located successfully, the watch will

automatically show the current altitude, then click

“OK’.

Calibration reference：

Temperature: You can refer to the thermometer to

calibrate the watch's temperature;

Pressure: If you are using iPhone, you can see the

current city pressure in the Weather application

Altitude: You can download an app called "GPS

Recorder", open your mobile phone location

service, and then refer to "Meter" interface

"Altimeter" in iOS system.

PS: If you use GPS to calibrate the altitude, please

operate in an open area.

If you need to calibrate both altitude and

atmospheric pressure, please calibrate the

atmospheric pressure first, then calibrate the

altitude.

If you go to another city, you need to re-calibrate the

pressure and altitude on your watch.

The watch Units

you set up

Units of

Temperature

Units of Altitude

Metric

Degrees Celsius

(℃)

Meter (m)

Imperial

Degrees

Fahrenheit (℉)

Feet

Main Menu

When turning on smart watch, you will see the watch

face.

From watch face:

1.Go to Main Menu

a.Slide from right to left to enter into main menu.

b.Swipe up and down (or turn the digital crown)

to switch the main menu.

c. Click the icon (or press the digital crown) to

enter the corresponding menu. Slide from left

to right to return to the previous menu.

2.Go to Notification shortcut page

Slide from left to right

3.Go to other shortcuts page

Swipe up and down.

Pair with smart phone

Mobile phones requirement:

Android 4.4 and above

iOS7.0 and above

Search and download “Orunning” app from App store

or the Google Play Store on your smart phone.

Step 1: Pairing through the application “Orunning” to

sync activity data and notifications etc..

1.Enable Bluetooth on your smart phone

2.Open Orunning App on your smart phone, set up

your profile on Settings.

3.Tap “Connect Smart Watch” on Settings, select

the name of your smart watch (or your smart

watch name_LE if iPhone) in the list of devices for

connection.

Step 2: Pairing for calling function (Only for iPhone)

Go to iPhone “Settings””Bluetooth” and select

your smart watch name in the list of devices for

connection.

Remark:

•If the connection is successful, a check mark will

appear next to the name of your phone

•Make sure your smart phone is set to be “Visible

to all nearby Bluetooth device”.

•The smart watch will automatically pair with your

smartphone after the initial pairing is successful.

•The smart watch will auto-sync the date and time

with your smartphone.

Function

Watch face

You can press the power button to go to the watch

face interface quickly.

Other manuals for SW-500

Table of contents

Popular Watch manuals by other brands

Pandora

Pandora WATCH2 quick guide

Casio

Casio QW-4343 Service manual

Suunto

Suunto X6 user guide

Seiko

Seiko N830 instruction manual

MotionX

MotionX 365 user guide

Garmin

Garmin VENU SQ 2 owner's manual

QCY

QCY Watch GTC manual

Canyon

Canyon Cindy CNE-KW41WP quick guide

Esq

Esq Watches Operating instructions warranty & service guide

Crane

Crane AA5-CDSM-3A user manual

Timex

Timex W-214 product manual

DETOMASO

DETOMASO MATERA manual

Geemarc

Geemarc Watch N Shake user guide

LORUS

LORUS W590 instruction manual

STENLILLE

STENLILLE Actío user manual

Casio

Casio 5594 Operation guide

Sinn

Sinn HUNTER'S WATCH 3. Edition manual

Slazenger

Slazenger SLZ800 manual