Denver SMARTWATCH SW-163 User manual
SW-163 SMARTWATCH
www.denver-electronics.com
www.facebook.com/denverelectronics ENGLISH
If the user manual is not printed in your local language, then please
enter our website to see if it is found online under the model you have.
The website address is: www.denver-electronics.com
ENG-1
1. Quick start guide
Overview
1. Touch screen
2. Function button
3. Heart rate sensor
4. Charging plate
5. Temperature sensor
To charge the smart watch, connect the charging clip of the USB
cable to the charging plate on the back of the smart watch. If
successfully connected, the charging icon appears on the screen.
ENG-2
Install app on the phone
Search and install the Denver Smart Life app from Google Play
or App Store. Or scan the following QR code to directly install the
app.
Android IOS
Connect the smart watch with the phone
1. Enable Bluetooth on your smart phone.
2. Open the Denver Smart Life app on your smart phone, and
then fill in all the requested information in the
menu.
3. Tap in Settings .
4. Select the smart watch icon to connect.
5. Choose your device name to connect it with your phone.
Unbind the smart watch with mobile phone
1. Open the Denver Smart Life app on your smart phone.
2. Tap in the Settings menu and confirm
.
3. To disconnect your smart watch with an iPhone, click
the Denver
Smart Life , and go to the Bluetooth settings on your
iPhone, then access and select the option.
ENG-3
Operation introduction
You can raise your hand or press the function button to turn on
the screen.
Press and hold the watch face screen, then slide left or right to
change the watch face.
Press and hold the function button to turn on the smart watch
when powered off.
2. How to use
Turn on: Press and hold the function button for 3 seconds.
Go to menu screen: Slide right or left in the watch face screen.
Select a function: Slide up/ down or right/left in the watch
face and tap the icon.
Confirm: Tap the icon.
Exit the menu: Slide the screen from left to right.
Return to the watch face: Press briefly the function button in
any screen.
Check messages: Slide from down to up in the watch face
screen.
ENG-4
3. Menu navigation
After turning on the smart watch, the watch face screen is
displayed.
When the watch face screen is displayed:
1. Go to the menu screens
a. Slide right or left in the watch face screen to enter the menu
screens.
b. Slide up and down or right and left to switch the menu
screens.
c. Tap the icon to enter the sub menu. Slide from left to right to
return to the previous menu.
ENG-5
2. Go to the messages shortcut screen
Slide from down to up in the watch face screen.
3. Go to other shortcuts screen
Slide up and down in the watch face screen.
4. Functions
Watch face screen
ENG-6
You can press the function button to go to the watch face screen
quickly.
If you want to change the watch face of your smart watch, press
and hold the current watch face for 3 seconds, then slide left or
right to go through the different watch faces and choose the one
you like.
Shortcut
Screen brightness
You can tap the brightness icon to adjust (+/-) the screen
brightness.
Find phone
If your smart watch is connected with Denver Smart Life app, you
can find your phone by tapping this icon and your phone will ring.
Shut down
You can shut down your smart watch by tapping this icon.
System
You can check the system of your smart watch by tapping this
icon.
ENG-7
Multi-Sport
Tap this icon to enter the multi-sport mode. The smart watch has
6 sports modes: walking, running, cycling, indoor run, hiking and
swimming. Choose a sport mode you want, and then do sports.
The smart watch records your exercise data.
If you want to end the sports, slide the screen to right and tap the
icon to finish your sports and save the data. The smart watch
displays your exercise data. your smart watch
with Denver Smart Life app via Bluetooth, you can also
check your exercise data in the app.
Note: If the exercise time is less than 5 minutes, the data cannot
be saved.
ENG-8
Body temperature monitor
Tap the body temperature icon to monitor your current surface
temperature and body temperature. To exit the body
temperature monitor, slide the screen to right. Please notice
this is not medical grade. If you are unsure, always use a standard
thermometer. Measurement tolerance 0.4 degrees Celsius.
Heart rate monitor
Tap this icon to monitor your current heart rate. To exit the heart
rate monitor, slide the screen to right.
Denver Smart
Life via Bluetooth, and turn on Healthy detection in
advanced settings of the app, you can also check your heart rate
data in the app.
Table of contents
Other Denver Watch manuals
Denver
Denver SWC-156 User manual
Denver
Denver SW-164 User manual
Denver
Denver SW-350 User manual
Denver
Denver SW152 BR User manual
Denver
Denver BFH-17 User manual
Denver
Denver SW-660 User manual
Denver
Denver BFH-150 User manual
Denver
Denver SW-181 User manual
Denver
Denver SW-360 User manual
Denver
Denver SW-182 User manual
Denver
Denver SW-151 User manual
Denver
Denver SW-164 User manual
Denver
Denver SW-170 User manual
Denver
Denver 985596 User manual
Denver
Denver SW-660 User manual
Denver
Denver SW-500 User manual
Denver
Denver SWC-342 User manual
Denver
Denver BFH-15 User manual
Denver
Denver SW-450 User manual
Denver
Denver SW-171 User manual
