Denver SW-660 User manual
Overview
Smart Watch
1. Touch screen
2. Shortcut key for sport mode
. Power button
4. Speaker
5. Charging terminals
6. Heart rate sensor
7. MIC
Charging
•If you use a power adaptor (Not included), current of the
power adaptor should be: 5V, 500mA.
ENG-2
•It takes 2-hours to fully charge the smart watch, please
follow steps below to charge.
1. Make sure the POGO-pins on the charging cable fit correctly
onto the charging terminals on the back of smart watch.
2. Plug the big end of the USB cable to a power source.
How to use
Turn on: Hold press power button in seconds
Go to main menu: Swipe from right to left on watch face
interface
Switch main menu: Swipe up/ down
Confirm: Tap the icon
Exit: Swipe from left to right
Return to watch face interface: Short press power button on any
interfaces
Sport mode shortcuts: Short press the shortcut key for sport
mode
Check notifications: Swipe from left to right on watch face
interface
Switch su menu/ shortcuts: Swipe up/ down
Turn off: Hold press power button in seconds
•
ENG-
When turning on smart watch, you will see the watch face.
From the watch face interface, swipe left to get into main menu,
right to get connection reminder or notification shortcut page, up
to get sports data and down to get basic settings.
Install “Denver Smart Life” app on the phone
ENG-4
Search and install the “Denver Smart Life” app from Google Play
or App Store. Or scan the following QR code to directly install the
app.
Android IOS
Connect smart watch with phone
Mobile phone requirement: Android 4.4 or above, iOS7.0 or
above.
Step 1: Paring SW-660 to the app
Enable Bluetooth on your smart phone and your smart watch.
Open DENVER Smart Life app on your smart phone, set up your
profile on Settings.
Tap “Denver SW-660” picture on Settings, select the name of your
smart watch (or your smart watch name_LE on iPhone) and select
your device in the list for connection.
Step 2: Pairing for calling function
Go to Phone “Settings”→”Bluetooth” and select your smart
watch name in the list of devices for connection.
ENG-5
Un ind smart watch with mo ile phone
1. Open “Denver Smart Life” on your smart phone.
2. Tap “Disconnect smart watch” on Settings.
. Forget your device on your smart phone Bluetooth settings.
Watch face
Long press current watch face, you can swipe left and right to
choose the watch face you prefer.
ENG-6
Shortcuts(swipe from up to down on watch face)
Gesture reminder
Gesture reminder, you can click the icon to turn on and off.
Power saving mode
In power saving mode, all functions will be off and only the current time
will be displayed.
Do not distur mode
Do not disturb mode, you can click the icon to turn on and off.
Sound
You can switch the sound mode by clicking the icon.
ENG-7
Sport mode
Short press the shortcut key for sport mode to get in, or swipe left on the
watch face to enter in sport mode. There are 5 sport modes- outdoor run,
walking, climbing, cycling, and indoor running. Slide up/ down to select
the sport mode you want to start.
1. GPS
a. When using GPS function, make sure to manually activate it
before usage.
. Go outdoors or an open area.
c. The front of the device should be oriented toward the sky.
d. Please wait a few seconds while the device locates satellites.
2. Sports tracking
Current GPS status, mileage, and time spent of your sport etc. will
be displayed.
ENG-8
Swipe from left to right, record of your sport data will be paused.
Click “Resume” to return and display real-time data of your sport.
Click “End” to end your sport, your sport data will be saved
automatically, and the sport data page will pop up.
Please note, if your sport time is very short, sport data cannot be
saved.
. History
You can view your sport history with detailed sport data, such as
mileage, cost time, averange pace, calories etc. And you can slide
to the bottom and click delete to delete this sport history.
4. Sport Setting
ENG-9
Target setting: you can set mileage, consume, time or just free
mode for your sport.
Alert settings: you can turn on or off some alerts here.
Personal data: you can set your personal information here.
Pedometer
The watch has built-in pedometer, and will track your steps during
the day. In the app you can set up your daily goal. You can also
turn on sedentary alarm and it will remind you to do some sports.
Heart rate
You can swipe times from down to up on watch face to test
heart rate. Make sure your smart watch fits snugly against your
wrist when measuring your heart rate.
Sleep monitor
The watch also registers your sleep and will give you an overview
over your sleep in the app (show you how many hours of deep
ENG-10
Other manuals for SW-660
1
Table of contents
Other Denver Watch manuals
Denver
Denver SW-164 User manual
Denver
Denver SW-160 User manual
Denver
Denver SW-660 User manual
Denver
Denver SW-151MK2 User manual
Denver
Denver SW-151 User manual
Denver
Denver SMARTWATCH SW-163 User manual
Denver
Denver SW-182 User manual
Denver
Denver SW-360 User manual
Denver
Denver SW-161 User manual
Denver
Denver SW-450 User manual
Denver
Denver SW-500 User manual
Denver
Denver SW-160 User manual
Denver
Denver BFH-150 User manual
Denver
Denver BFH-150 User manual
Denver
Denver SW-650 User manual
Denver
Denver SW-173 User manual
Denver
Denver SW-350 User manual
Denver
Denver SW-171 User manual
Denver
Denver SW-164 User manual
Denver
Denver SW-154 User manual
