Denver BTL-62 User manual
Operation Instruction
When you turn on the speaker, it will by standard
start in Bluetooth model. You can then easily pair
with your smartphone or PC with Bluetooth
function. If you don’t pair it within 10 minutes,
the speaker will go into sleep mode, and you have
to turn it off/on to pair again.
Press “M” button to switch functions.
Button Instruction :
⑴: Power Key
⑵LINE port: 3.5 audio input port
⑶Play/Pause: Pause and play in play mode.
⑷Volume down/Next: Long press to
decrease volume. In FM mode, short press to
switch PRE frequency. In music mode, short
press to switch previous song.
⑸Volume up / PRE: Long press to increase
volume, In FM mode, short press to switch to
next frequency, In music mode, short press
to switch to next song
⑹M - mode switch: switch to FM radio mode,
in “FM” mode, long press 3 seconds to
Tune.
(Note: short press=hold the key for less than 1
second, Long press=hold the key for about 3
seconds)
Light control button:
How to turn ON and OFF
Long press the key to turn ON and long press the
key to turn OFF.
Light flash when on mode
(Full color sine move up and down)
Press one time for 1st mode (multicolor lights flash to rhythm
of the music)
Press two times for 2nd mode (multicolor lights flash in a
graphic form)
Press three times for 3rd mode (two color lights flash
alternatively)
Press 4th mode 4 (light off)
Press again light back to default status.
1. light mode button:
How to connect Bluetooth devices (Mobile
Phone/Laptop/iPhone/iPad, etc.)
1. Turn on speaker and make sure it is in
Bluetooth mode. The blue indicator flashes and a
beep sound.
2. Enter Bluetooth settings on your smartphone
or PC, find BTL-62 on the list over Bluetooth units,
and choose it to pair.
3. After successfully paired, the speaker will give a
beep, and on your phone it will show that the
speaker is connected.
4. After successful connection, Bluetooth devices
can play to the speaker. Blue light will flash slowly
when it is in Bluetooth play mode.
How to use AUX input mode.
In any mode, insert 3.5mm to the Bluetooth
speaker, and to the audio source you want to
listen to. The Bluetooth speaker will automatically
change to AUX input.
How to operate FM radio
Press Mto enter FM mode. Then long press M to
make automatically search for channels. The blue
indicator flashes. When finished, the system will
automatically play the first found station. Short
press or to change stations.
Note: Please insert USB cable for better FM
receival. It works as an antenna.
How to charge the speaker
Please charge the speaker before first time use.
Plug one part of the USB charge cable into the
speaker Micro USB port, and the other part to a
computer USB port or an external USB adaptor
(not included). Charging the battery fully may take
up to 6 hours (first time please extend charging
time). When charging has finished the red
indicator will turn off.
FAQ
Cannot connect and play
1) Check Bluetooth settings on your phone or PC.
(Some PC’s cannot be used for Bluetooth audio)
2) Check if the speaker are properly charged. If
the red indicator flashes when you turn on the
speaker, please charge it.
3) Please turn off, pair the Bluetooth unit again,
and try once more.
*If the above doesn’t solve your problems, please
contact the store where it is bought.
Bad radio reception
★Research the station at an open place
★Insert USB cable as external antenna to
enhance reception
Please notice - All products are subject to change
without any notice. We take reservations for errors
and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER
ELECTRONICS A/S
Electric and electronic equipment and included
batteries contains materials, components and
substances that can be hazardous to your health
and environment, if the waste material (discarded
electric and electronic equipment and batteries) is
not handled correctly.
Electric and electronic equipment and batteries is
marked with the crossed out trash can symbol,
seen below. This symbol signifies that electric and
electronic equipment and batteries should not be
disposed with other household waste, but should
be disposed of separately.
As the end user it is important that you submit your
used batteries to the appropriate and designated
facility. In this manner you make sure that the
batteries are recycled in accordance with
legislature and will not harm the environment.
All cities have established collection points, where
electric and electronic equipment and batteries can
either be submitted free of charge at recycling
stations and other collection sites, or be collected
from the households. Additional information is
available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio
equipment type BTL-62 is in compliance with
Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the
following internet address: http://www.denver-
electronics.com, and then click the search ICON
on topline of website. Write model number: BTL-
62. Now enter product page, and red directive is
found under downloads/other downloads.
Operating Frequency Range: 2.402-2.480 GHz
Max Output Power: 2.06 dBm
Warning: Lithium battery inside
Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
Other manuals for BTL-62
1
Other Denver Speakers manuals
Denver
Denver BTS-90 User manual
Denver
Denver BTS-53 User manual
Denver
Denver BPS-350 User manual
Denver
Denver TSP-205 User manual
Denver
Denver TSP-452 User manual
Denver
Denver BTS-21 User manual
Denver
Denver BTS-400 User manual
Denver
Denver BTS-52 User manual
Denver
Denver SP-1000 User manual
Denver
Denver TSP-306NR User manual
Denver
Denver BTM-610 User manual
Denver
Denver BTS-650WHITE User manual
Denver
Denver BTP-103 User manual
Denver
Denver BTS-32 User manual
Denver
Denver BPS-351NR User manual
Denver
Denver GAS-500 User manual
Denver
Denver CSP-5165 User manual
Denver
Denver BTL-54NR User manual
Denver
Denver BTS-63 User manual
Denver
Denver BTS-32MK2 User manual
