Denver SHA-150 User manual
DENVER SHA-150 – Smart alarm system
With included IP camera
www.denver-electronics.com
1. Included in the package is:
- 1 x control panel
- 1 x keypad
- 1 x PIR motion senso
- 1 x door/window sensor
- 1 x remote controls
- 1 x passive RFID tag
- 1 x IP camera
- 1 x burglar preventive warning sign
- 3 x burglar preventive warning stickers
All the accessories are paired with the control panel, except the IP
camera.
2. Design
Power switch SIM card slot
Power adapter input USB Interface
Connection button
SIM
ENG
3
3. Get started
Download the app called “DENVER SMART HOME” on your smart phone.
It is available on Appstore and Google play.
The app will ask you to register a user. Please do this by using your mobile
number or email address, and then log into the app. You will be asked to
create a “family”. This is to make it easy to have several systems in the app
at the same time.
Now you need to add the alarm system to the app.
First, unpack control panel and all accessories, make sure to pull out any
battery savers and turn on the control panel by pushing the power switch
(use a pen or a toothpick or similar small product to push the power switch)
LED indications
- Red Blink/fixed: System Armed
- Blue Blink/fixed: System armed in home mode
- Green Blink/fixed: System disarmed
- Red/Blue/Green fixed: Connected to the server
- Red/Blue/Green Blink Slowly: Wi-Fi network disconnected
- Green Blink Fast: Wi-Fi network settings EZ mode
- Blue Blink Fast: Wi-Fi network settings AP mode
- White fixed: RF connection mode
4
4. Daily use
In your home screen of the app you can now find your alarm. Push this
and you will get to alarm setting page. Here you can arm, disarm, put in
home mode etc. This is also where you add sensors and accessories if
you get more of them. You can also adjust delay time, automated arm/
disarm times etc.
Now the alarm system is connected and you can put your sensors etc.
where you want them.
You need to connect the IP camera separately. To do that, repeat the
“add new” instructions and choose “security & sensor” and then choose
“smart camera” and follow on screen instructions.
Push “Add Device”, go to “Others” and choose “Wi-Fi connector!, and
follow on screen instructions. It will guide you through the whole setup.
5
You can also use the remote control to arm/disam alarm system. And also
the keypad that are included.
When using the keypad, push the code (standard 1234, which can of
course be changed) and then the lock to arm it, do the same thing and
the open lock to disarm)
The RFID tag can be used to disarm the alarm system. This is done by
holding it up against the keypad. (you can only disarm this way, not arm)
The smartest & easiest way to use DENVER SHA-150 is with this
smartphone
app, and the alarm system on Wi-Fi, but It is possible to use the alarm
system with SMS commands or phone call as well. Instructions to do this
can be found in the full manual, available on our website. Please enter
www.denver-electronics.com and use the search function to find
SHA-150.
Here you can find the full manual in English.
6
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric and
electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen above. This symbol signifies that
electric and electronic equipment and batteries should not be disposed
of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
appropriate and designated facility. In this manner you make sure that
the batteries are recycled in accordance with legislature and will not
harm the environment.
If you by any means need to reset the control panel this is done by
pushing the connection button 5 times within 5 seconds, after turning on
the control panel. This will set it back to factory default. (Please notice
that all pairing with sensors and accessories are also deleted then. Please
check the full manual to see how to add sensors again.
Please notice - All products are subject to change without any notice. We
take reservations for errors and omissions in the manual.
7
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at
recycling stations and other collection sites, or be collected from the
households. Additional information is available at the technical
department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type SHA-150 is
in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.denver-electronics.com and then click the search ICON on topline
of website. Write model number: SHA-150. Now enter product page, and
red directive is found under downloads/other downloads.
Operating Frequency Range: 433MHz(±75KHz)
Max Output Power: 20dB
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
8
1. Lieferumfang:
- 1 x Alarmzentrale
- 1 x Bedienfeld
- 1 x PIR-Bewegungsmelder
- 1 x Tür-/Fensterkontakt
- 1 x Fernbedienung
- 1 x passiver RFID-Tag
- 1 x IP-Kamera
- 1 x Warnschild
- 3 x Warnaufkleber
Alle Zubehörteile sind mit der Alarmzentrale gekoppelt, mit Ausnahme der
IP-Kamera.
2. Design
Ein-/Ausschalter SIM-Kartensteckplatz
Netzteil-Eingang USB-Port
Verbindungstaste
SIM
DEU
9
3. Erste Schritte
Laden Sie die App „DENVER SMART HOME“ auf Ihr Smartphone herunter.
Sie ist im App Store und bei Google Play zu finden.
Die App fordert Sie auf, sich als Benutzer zu registrieren. Verwenden Sie
dazu Ihre Handynummer oder E-Mail-Adresse und melden Sie sich dann
bei der App an. Sie werden aufgefordert, eine „Familie“ zu erstellen. Dies
soll es vereinfachen, mehrere Systeme gleichzeitig in der App zu haben.
Anschließend müssen Sie das Alarmsystem zur App hinzufügen.
Zuerst packen Sie die Alarmzentrale und alle Zubehörteile aus. Ziehen Sie
alle Batterieschoner (Plastikstreifen) heraus und schalten Sie das
Alarmsystem durch Drücken des Ein-/Ausschalters ein (verwenden Sie
einen Stift, einen Zahnstocher oder ein ähnliches kleines Produkt).
LED-Anzeigen
- Blinkt/leuchtet rot: System scharfgeschaltet
- Blinkt/leuchtet blau: System im Anwesendmodus scharfgeschaltet
- Blinkt/leuchtet grün: System unscharf geschaltet
- Leuchtet rot/blau/grün: Mit Server verbunden
- Blinkt langsam rot/blau/grün: WLAN-Netzwerk getrennt
- Blinkt schnell grün: WLAN-Netzwerkeinstellungen, EZ-Modus
- Blinkt schnell blau: WLAN-Netzwerkeinstellungen, AP-Modus
- Leuchtet weiß: HF-Verbindungsmodus
10
Other manuals for SHA-150
2
Table of contents
Languages:
Other Denver Security System manuals
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual