DeLonghi D 90 G Quick guide
INSTALLATION and SERVICE INSTRUCTIONS
D 90 G
Professional
COOKER
USE and CARE INSTRUCTIONS
distributed by Industries Ltd
PP
PPAA
AARR
RREE
EEXX
XX
2
Dear Customer,
Thank you for having purchased and given your
preference to our product.
The safety precautions and recommendations reported
below are for your own safety and that of others. They
will also provide a means by which to make full use of
the features offered by your appliance.
Please keep this booklet in a safe place. It may be
useful in future, either to yourself or to others in the
event that doubts should arise relating to its operation.
This appliance must be used only for the task it has
explicitly been designed for, that is for cooking
foodstuffs. Any other form of usage is to be considered
as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the
event of damage caused by improper, incorrect or
illogical use of the appliance or be faulty installation.
PRODUCT LABEL
3
FIRST TIME USE THE OVEN
It is advised to follow these instructions:
■Clean the interior of the oven with cloth soaked in water and detergent (neutral)
then dry carefully.
■Fit the wire racks as described at chapter “Use and care”.
■Insert shelves and tray.
■Switch on the empty oven on max to eliminate grease tracks from the heating
elements.
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR
USE OF ELECTRICAL APPLIANCES
Use of any electrical appliance implies the necessity to follow a series of fundamental
rules. In particular:
■Never touch the appliance with wet hands or feet;
■do not operate the appliance barefooted;
■do not allow children or other incapable people to use the appliance
without supervision.
The manufacturer cannot be held responsible for any damages caused by improper,
incorrect or illogical use of the appliance.
4
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS
After having unpacked the appliance, check to ensure that it is not damaged.
In case of doubt, do not use it and consult your supplier or a professionally qualified techni-
cian.
Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not
be left around within easy reach of children, as these may cause serious injuries.
■Do not attempt to modify the technical characteristics of the appliance as this
may become dangerous to use.
■Do not carry out cleaning or maintenance operations on the appliance without
having previously disconnected it from the electric power supply.
■After use, ensure that the knobs are in off position.
■Do not allow children or other incapable people to use the appliance without
supervision.
■During and after use of the cooker, certain parts will become very hot. Do not
touch hot parts.
■Keep children away from the cooker when it is in use.
■Some appliances are supplied with a protective film on steel and aluminium parts.
This film must be removed before using the appliance.
■Fire risk! Do not store flammable material in the oven, and in the accessory
drawer.
■Make sure that electrical cables connecting other appliances in the proximity of
the cooker cannot come into contact with the hob or become entrapped in the
oven door.
■Do not line the oven walls with aluminium foil. Do not place baking trays or the
drip tray on the base of the oven chamber.
■The manufacturer declines all liability for injury to persons or damage to property
caused by incorrect or improper use of the appliance.
■IMPORTANT NOTE: This appliance shall not be used as a space
heater, expecially if installed in marine craft or caravans.
5
INSTALLATION
CAUTION:
■
This appliance must be installed in accordance with these installation
instructions, local gas fitting regulations, municipal building codes,
water supply regulations, electrical wiring regulations, AS5601 / AG 601
- Gas Installations and ony other relevant statutory regulations.
■
This appliance shall be only be serviced by authorized personnel.
■
This appliance is to be installed only by an authorised person.
■
Incorrect installation, for which the manufacturer accepts no
responsibility, may cause personal injury of damage.
■
Always disconnect the cooker from mains power supply before carrying
out any maintenance operations or repairs.
■
In the room where the cooker is installed, there must be enough air to
allow the gas to burn correctly, according to the current local
regulations.
6
ELECTRICAL REQUIREMENTS
■The appliance must be connected to the mains checking that the voltage
corresponds to the value given in the rating plate and that the electrical
cable sections can withstand the load specified on the plate.
■The plug must be connected to an earthed socket in compliance with safety
standards.
■If the appliance is supplied without plug, fit a standard plug which is
suitable for the power consumed by the appliance.
■The appliance must be connected directly to the mains placing an omnipolar
switch with minimum opening between the contacts of 3 mm between the
appliance and the mains.
■The power supply cable must not touch the hot parts and must be
positioned so that it does not exceed 50°C above ambient.
■Once the appliance has been installed, the switch or socket must always be
accessible.
■
If the power supply cable is damaged it must be substituted by a suitable
cable according to current electrical regulations.
N.B. The connection of the appliance to earth is mandatory.
If the installation requires alterations to the domestic electrical system call a qualified
electrician.
He should also check that the socket cable section is suitable for the power drawn by
the appliance.
Replacing the power cord must be done by a qualified electrician in
accordance with the instructions supplied by the manufacturer and in
compliance with established electrical regulations.
7
CLEARANCES
Installation clearances and protection of combustible surfaces shall comply with
the requirements of AS5601 / AG 601 - Gas installation.
Installation shall comply with the Dimension in Fig 1 bearing in mind that
Overhead Clearances
In no case shall the clearances between the highest part of the cooker be less
than 600mm or for an ovehead exhaust fan 750mm. AII other downward facing
combustible surfaces less than 600mm above the cooker surface shall be protected
for the full width of the cooking surface in accondance with the standards noted
above. In no case shall the clearance be less than 450mm
Side Clearances
Where the dimensions from the periphery of the nearest burner to any vertical
combustible surface is less than 200mm the surface shall be protected in
accordance with the standards to a height of not less than 150mm above the
cooking surface for the full width or depth of the cooking surface
Protection of combustible surfaces.
The standards above specify that where required protection shall ensure that the
surface temperature of the combustible surface does not exceed 50°C above room
temperature.
Figure 1
450 mm
300 mm
650 mm
500 mm
8
Figure 2
ANTI-TILT BRACKET
Fixing the anti-tilt bracket:
■After you have located where the cooker is to be positioned mark, on the wall, the
place where the 2 screws of the anti-tilt bracket have to be fitted. Please follow the
indications given in the drawing below.
■Make two holes of diameter 8mm diameter on the wall and insert the plastic plugs.
■Attach the anti-tilt bracket loosely by means of 2 screws.
■Move the cooker to the wall and adjust the height of the anti-tilt bracket so that it can
engage in one slot of the cooker back.
■Attach the anti-tilt bracket tight.
■Push the cooker against the wall so that the anti-tilt bracket is fully inserted in one slot
of the cooker back.
=
=
9
S
D
B
C
ASSEMBLING THE BACKGUARD
1. Insert the side supports S and D into the backguard B (see fig. 3)
2. Insert the backguard group into the support guides in the cooker
3. The backguard can be removed for cleaning or fixed with a screw through the
hole C.
Identification
label
When you open the
bottom oven door the
indentification label is
at the bottom right
hand side.
Figure 3
USE and CARE
CAUTION:
■This appliance must be used only for the task it has explicitly been designed for,
that is for cooking foodstuffs. Any other form of usage is to be considered as
inappropriate and therefore dangerous.
■Do NOT place combustible materials or products on this appliance at any time.
■Do NOT spray aerosols in the vicinity of this appliance while it is in use.
USING THE OVEN FOR THE FIRST TIME
■Clean the inside of the oven with a cloth soaked in water and neutral detergent
and dry thoroughly.
■Slide in the catalytic liners and wire racks on the oven wall as in Fig. 4. Position
the shelf and tray as per Fig. 5.
■To eliminate traces of grease in manifacture it is necessary to pre-heat the oven
at the maximum temperature, for 60 minutes in the position, for 30 minutes
in the position and for another 15 minutes in the position.
Figure 4 Figure 5
10
Table of contents
Other DeLonghi Cooker manuals
DeLonghi
DeLonghi DFG 905 Operation instructions
DeLonghi
DeLonghi DSC G Series Assembly Instructions
DeLonghi
DeLonghi D3VR 908-DF User manual
DeLonghi
DeLonghi D 926 GII Quick guide
DeLonghi
DeLonghi L61GW Quick reference guide
DeLonghi
DeLonghi DTR 906-DF Series Technical manual
DeLonghi
DeLonghi DEMX 9642 B User manual
DeLonghi
DeLonghi SGGX 554 N ED User manual
DeLonghi
DeLonghi DSC 90 DF FSD Operation instructions
DeLonghi
DeLonghi A 726 G Quick guide
DeLonghi
DeLonghi DEFL605G Quick guide
DeLonghi
DeLonghi GEMMA 96 M ED User manual
DeLonghi
DeLonghi EMFI User manual
DeLonghi
DeLonghi DE 61 GW Installation guide
DeLonghi
DeLonghi PEMA 96 Operation instructions
DeLonghi
DeLonghi DEMX 96 B5 ED User manual
DeLonghi
DeLonghi DFS 090 DO Operation instructions
DeLonghi
DeLonghi DSR 9071 DF Operating instructions
DeLonghi
DeLonghi DS 61 GW Quick guide
DeLonghi
DeLonghi ESS603 Operation instructions
