Dell 3115CN User manual

Dell 3115cn

Service Manual

23 Mar 2009

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc.is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and

names of their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than

its own.

Version record

Version recordVersion record

Version record

Refer to the portion indicated by change bar in each section.

Also refer to the reasons in table below.

Version Issue date Note

1st November 28, 2006 1st issued

2nd

March 20, 2007

version issued

Section 1, FIP

The contents were improved.

Section 2, Operation of Diagnostic

The contents were improved.

Section 3, RRP

The contents were improved.

Section 4, P/J Locations

The contents were improved.

Section 5, Parts List

The contents were improved.

Section 7, Wiring

The contents were improved.

Section 8, Specifications

The contents were improved.

3rd

March 23, 2009

3rd version issued

Section 5, Parts List

The contents were improved.

Version 2 2007.03.20

Cautions

Operation contents of this document may be subject to modification without notice.

Dell Inc. will not assume responsibility for accidental or incidental damages resulting from technical

or editorial errors or omissions in this manual, the issue of this manual, the execution of descriptions

in this manual, or the use of this manual.

This document is protected by copyright. Do not photocopy or duplicate any part of this document in

any form without written permission from Dell Inc.

Version 2 2007.03.20

1. About this manual

This manual is a standard service manual of Dell Inc. containing information required for maintenance

of this laser printer (standard specifications).

2. Marks giving caution

Maintenance operations requiring special cautions or additional information regarding descriptions in

this manual are presented as "Warning," "Caution," or "Note," depending on their nature.

If instructions are not observed, death or serious injury may result.

If instructions are not observed, injuries to workers or physical damage to assets

(including this laser printer) may result.

Essentials for procedures, steps, rules, and others.

Reference Incidental information to descriptions.

3. Related documents

-Instruction manuals (standard manuals)

Describe the operation and handling of this laser printer.

-Performance specifications

Describe in detail various specifications of this laser printer.

(In the event of a discrepancy between this manual and the performance specifications, the

performance specifications take precedence.)

-Spare parts list

Information on maintenance parts (spare parts) for this laser printer.

iii

Version 2 2007.03.20

4. Safety

To prevent possible accidents during maintenance operation, you should observe strictly the "Warning"

and "Caution" information in this manual.

Avoid dangerous operations and operations out of the scope of this manual.

Various processes not covered by this manual may be required in actual operations, and should be

performed carefully, always giving attention to safety.

4.1 Power source

Keep the power plug disconnected during the maintenance operation to prevent electric shock, burns

and other damages.

If the power supply should be kept connected to measure voltage or for other similar reasons, take

sufficient care to prevent electric shock, by following the procedures in this manual.

While the printer is on, never touch live parts if not required.

Power is supplied to the power switch / inlet even while the printer is off. Never

touch its live components.

Do not touch live parts unless otherwise specified.

Gnb00002KB

Version 2 2007.03.20

4.2 Driving units

When servicing gears or other driving units, be sure to turn them OFF and plug off. Drive them

manually when required.

Never touch the gears or other driving units while the printer is running.

4.3 High-temperature units

When servicing high-temperature units (securing unit, etc.), be sure to turn them off to prevent burns,

injuries and other troubles. Remove the power plug and start service processes after they have cooled

down sufficiently.

Because high-temperature units are still hot after they complete an operation, wait

at least 40 minutes before starting maintenance service.

Version 1 2006.11.21

4.4 Battery

Lithium Battery is used in the following component.

- PWBA HYUI

There is a danger of a new battery exploding if it is incorrectly installed.

Replace the battery only with the same or equivalent type recommended by the

manufacturer.

Dispose the battery according to the manufacturer’s instruction.

Gnb00011KA

PWBA HYUI

Version 2 2007.03.20

4.5 Laser beams

• If your eyes are exposed to laser beams, you may lose your eyesight.

• Never open the cover if the warning label for laser beams is attached there.

• Before disassembling and reassembling this laser printer, be sure to turn it OFF.

• When servicing this laser printer while it is running, be sure to follow the

procedures specified in this manual.

• You should be well aware that the laser beams are capable of injuring you and

other people near the printer.

Laser beams have features as follows:

• Frequencies are smaller in width than other beams (sun and electric bulbs) and

phases are uniform so that high monochromatic and convergence performance

can be obtained and thin beams of light can reach places at a long distance.

• Being highly converged, the laser beams exert a heating action that may be

harmful to human body.

Reference: The laser beams of this laser printer are invisible rays.

Gnb00003KA

PRINT HEAD

vii

Version 2 2007.03.20

4.6 Warning/caution labels

Warning labels and caution labels are attached to this laser printer to prevent accidents Check those

labels for their peeling or stains when servicing the printer.

4.6.1 Caution label for high-temperature units

Gnb00004KA

Other manuals for 3115CN

Table of contents

Other Dell Printer manuals

Dell

Dell 2355dn User manual

Dell

Dell B1265DNF User manual

Dell

Dell 3130cn - Color Laser Printer User manual

Dell

Dell 3130cn - Color Laser Printer Installation and operation manual

Dell

Dell J740 User manual

Dell

Dell DELL 7130CDN User manual

Dell

Dell V505 - All-in-One Printer Color Inkjet User manual

Dell

Dell B2360D User manual

Dell

Dell C5765DN User manual

Dell

Dell DELL 7130CDN Service manual

Dell

Dell 5310n - Workgroup Laser Printer B/W User manual

Dell

Dell B5460dn Mono Laser Printer User manual

Dell

Dell Laser Printer 5530dn User manual

Dell

Dell C7765DN Manual

Dell

Dell 7330dn - Laser Printer B/W User manual

Dell

Dell B1260dn User manual

Dell

Dell M5200 User manual

Dell

Dell 1350 Color User manual

Dell

Dell B5460dn Mono Laser Printer User manual

Dell

Dell W5300 User manual

Dell

Dell B5460dn Mono Laser Printer User manual

Dell

Dell 2350D User manual

Dell

Dell C1660w Color Laser Print User manual

Dell

Dell 1110 - Laser Printer B/W User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide

IRA3D

IRA3D POETRY4 Original instructions