PAGE 2 46132-41-0800<90-00209>>
NOTE: This section lists the different options available for this product. To order any of the avail-
able options, contact Dantel Inside Sales through our toll-free number, 1-800-432-6835.
OPTION NUMBER FEATURES
B15-46132-41
RemoteMaster
; 64 discrete alarm inputs, 8 control outputs, 2 serial (TBOS) alarm interrogator
ports, 2 RS-232/422/485 responder ports, 1 RS-232 configuration port
A05-00826-00 Wall-Mount Brackets
ORDERING INFORMATION
The 46132-41 RemoteMaster is a master alarm system
primarily intended for small sites. The RemoteMaster
gathers alarm information from 64 ground-activated discrete
alarm inputs. In addition, 8 on-board relays are available for use
as controls and two serial ports interrogate TBOS equipment.
All this alarm information is gathered and reported to two
responder ports which send that information towards your
Alarm Center.
A front panel LED display reports port status and alarm infor-
mation. On-site configuration is quick and simple. The 46132-41
RemoteMaster differs from the other RemoteMasters:
♦Defaults to TABS protocol on its two responder ports
♦Front panel configurable for TABS address (0-31)
♦New backplane makes interconnection easier
♦New power connections allow redundent power supplies
ABOUT THIS MANUAL
This manual is presented in two parts, Standard Installation
and Custom Installation/Custom Configuration.
Standard Installation
Use this section if your application requires a TABS responder
and discrete alarm reporting only. The 46132-41 RemoteMaster
is factory-configured for:
♦TABS output
♦2400 baud, odd parity, 1 stop bit, 8 bit word length, RS-422
♦Discrete alarm gathering only
All that remains is to mount the unit in the rack, wire the
required alarms and responder ports and, from the front panel,
set the TABS address.
GENERAL DESCRIPTION
