Dante DLS1798LA3P9S User manual
DLS1798LP
Thermal PTZ Camera
Installation and Operations Manual
Model Number: DLS1798LA3P9S - N SC
DLS1798LB3P9S - PAL
Description: hermal and 36x CCD P Z Camera
DLS1798LA-B3P9S
Intelligent PTZ Thermal Imaging System
User Operation Manual
Thank you for using our company’s product. Please read this operation manual
carefully before using it, as it may provide User with correct technical
information on how to properly do the installation.
Please contact us if User comes across problems that are not mentioned in this
instruction. We will supply User with additional technical support.
Warning: Remind user of potential danger!
1. Please read this instruction carefully before installing this device.
2. Please follow the warnings on the device and the instruction.
3. During the process of transporting and use, please avoid strong vibration in
order to protect the optic and electronic components.
4. Please use the power supply specified instruction on how to connect the
wires.
5. Do not open the device by yourself, or else it may cause electric shock or
machine damage. If there are problems, please contact factory and remember
not to try and repair it without instructions from Dante.
6. In order to protect the device and people, this device need to be installed on
firm, flat area.
7. Please install appropriate surge protection equipment to avoid damage from
power surge or lightning.
8. Use this device within the limitation of humidity and temperature.
9. To protect the imaging components from damage, please do not aim the
visible camera at sun and other objects of high bright intensity for a long time.
Attention
Don’t cover the sensitive components in front of lens in order to ensure the
device operates normally.
If the thermal camera is not operating as a result of power outage, please
restart unit.
Content
Part One Introduction .........................................................................................................1
1.Introduction...................................................................................................................1
2.Features........................................................................................................................1
3.Technical Indicators......................................................................................................2
Part Two Installation Instruction........................................................................................3
1.Installation Environment ...............................................................................................3
2.Shape and dimension...................................................................................................4
3.Installation step.............................................................................................................4
4.System connection reference.......................................................................................7
Part Three Operation Introduction......................................................................................8
1.Function Introduction....................................................................................................8
2.Menu Setup Instruction ................................................................................................9
3.Protocol and Address Setting .....................................................................................16
Part Four Quality guarantee and after-sales service............................................................19
1.Quality Guarantee and After-sales Service................................................................19
Appendix I: Common Problems Analysis...........................................................................19
Appendix II : RS 485 LINE ...............................................................................................20
Appendix III: Cable Spec List all countries ........................................................................22
1
Part One Introduction
1. Introduction
This thermal imaging camera combines thermal imager, visible camera and
pan-tilt. Unit has two video output and 360°horizontal pan rotation for high end
monitoring
2. Features
DLS1798 adopts thermal imaging technology and has a clear image, not
restricted by light
low light color to black and white camera for continuous monitoring day and
night
integrated pan-tilt, for multiple movement directions, no blind spot
monitoring and high accurate orientation
high intelligent, easy to operate and maintain
smart shell with professional design, light, firm, thermo stabilization,
anti-corrosion, waterproof and acid rain proof
low power consumption, low heat producing, stable performance
2
3.Technical Indicators
Effecting
Distance
Night vision 800m-2Km
Day vision 1000m
Camera
Sensor 1/4″Exview HAD CCD
Valid pixel 440,000
TV Line 550TVL（color）；570TVL（black & white）
Focal length 3.4～122.4 mm，36x optical zoom
Iris F1.6～F4.5
FOV 57.8°(wide)～1.7°(telephoto)
Focus Auto/Manual/Zoom trigger
Lowest illumination 0.2Lux/F1.49( color); 0.001Lux/F1.4( black & white )
White balance Auto，ATW，Indoor，Outdoor，One-push，Manual
Signal-to- noise ≥50db
Thermal
imager
Sensor Uncooled infrared focal plane detector（vox）
Valid pixel 320x 240(NTSC); 320×256 (PAL)
Wave length 8～14µm
Focal length 50mm
FOV 13.9°×11.1°
Spatial resolution 0.76mrad
Lens control Electronic focus
Image process 2X electronic zoom, palette colors
Pan-tilt
Pan speed 0°～50°/s
Tilt speed 0°～50°/s
Presets 128 at most
Cruise function 6 cruise paths, 20 presets for each path
Self-checking 40s
Interface
Power supply
interface
Terminal Block
Other interface RS422, 2×BNC video output, 2 alarm input, 1 alarm
output
Environmen
t indicators
Working
temperature -25
℃
～+55
℃
Storage
temperature -40
℃
～+65
℃
International
protection IP66
Anti-impact 15m/s
2
, 5~200Hz
Anti-vibration 150m/s
2
, 11ms
Salt-fog proof continuously spray fog for 48 hours under PH6.5-7.2
Power
supply
Power 24VAC
Power consumption ≤30W
Physical
indicators
weight 7.5kg
dimension 374mm×218mm×243mm(L×W×H)
Installation Outdoor base install
3
Part Two Installation Instruction
1.Installation Environment
Before installation, please check if the environmental temperature, humidity,
cleanliness, radio frequency, surge protection; be sure it meets the requirements,
check if the power supply is safe.
(1) Anti-static
Keep suitable temperature and humidity conditions
(2) radio frequency
Keep the night vision camera far away from the radio transmitters, radar
transmitters and other high-frequency devices
Adopts electromagnetic shield when necessary
(3) Surge Protection
The lines’ lightning-proof design must be considered integrated with the
building lighting-proof requirements, and must comply with the national
standards and industry standards.
The ground system must meet the both radio frequency and electrical safety
requirements, and must not short connect or mixed connect to the electrical
network zero curve.
When the system connect GND separately, the grounding resistance must
be less than 4Ω, grounding conductor cross-sectional area must be more
than 25mm²Water-proof
External lines must be connected to the aviation plug firmly to proof water in,
or the camera will be damaged.
(4) Weight Support
The night vision camera needs to use pole or bracket to support its weight, so
User must make sure the pole or arm may withstand the weight more than 20kg.
4
2.Shape and dimension
Night vision camera’s shape and dimension (mm)
3.Installation step
a．Remove the thermal camera’s bottom plate
b．Adjust the dip switch (according to the address set up instruction) to set up
the address (connect the camera to the resistor)
c．Re-install the bottom plate; please maintain the unit airproof and waterproof
d．Using four pieces M3X8 screw to fix the shield to camera, then using four
pieces M8X25 screw and four pieces M8 nut to fix the whole device to the
bracket
5
Fixing Layout
After installation, please connect the aviation plug pinout according to the
definition below, then connect to the device. Definition as follows:
Power supply, control signal input, video signal output all connect with one cable
with 12 PINS. See below:
6
twelve-hole aviation outlet pin definition:
No. Definition Remark
1 Video 1+ Video 1 Output +
2 Video 1- Video 1 Output -
3 24VAC: black (thick) 24VAC power input
5 RS422Y: red (thin) 422 control Y
6 RS422B-: yellow 422 control B
7 24VAC: red (thick) 24VAC power input
9 RS422Z: black (thin) 422 control Z
10 RS422A: orange 422 control A
11 Video 2+ Video 2 Output +
12 Video 2- Video 2 Output -
Night vision camera’s alarm input and output uses compound cable with 7-core
aviation connector, see below:
7-core aviation pin connector definition:
PIN NO. Definition Remark
1 ALARM_OUT: gray Alarm output
2 ALARM_OUT: yellow Alarm output
4 ALARM_IN1:blue Alarm input 1
5 ALARM_IN2:white Alarm input 2
6 ALARM_COM:black Alarm input ground
Note:
1.Please go ahead with the bolts M6×45 and M6 nuts which are equipped with
the camera. If need to change bolts because of bolts length, do make sure
diameter is correct
2.Avoid shaking and extrusion during fixing for protecting key components and
optics inside. Signal transmission line should be kept 50m away from high
voltage devices and cables.
This manual suits for next models
1
Table of contents
Other Dante Security Camera manuals
Dante
Dante DLF1129P User manual
Dante
Dante DN1125A4 User manual
Dante
Dante DLF1330A User manual
Dante
Dante DLF1330V User manual
Dante
Dante DLS1621A51 User manual
Dante
Dante DNA1425T User manual
Dante
Dante DLC1981 User manual
Dante
Dante DN1126 User manual
Dante
Dante DNA1990 User manual
Dante
Dante DNA1991YM User manual
Dante
Dante DLF1323AP User manual
Dante
Dante DLF1329WPV User manual
Dante
Dante DNA1355V User manual
Dante
Dante DLI1972 User manual
Dante
Dante DLV1329A21V User manual
Dante
Dante DLV1420W User manual
Dante
Dante DLF1328A User manual
Dante
Dante DLF1325B User manual
Dante
Dante DNA1982 User manual
Dante
Dante DLM1971 User manual
