Danfoss Type CFR User manual

RoomThermostat

User Guide

Type CFR

Temperature setting

Set room temperature on the thermostat dial.

On the right-hand side of the thermostat is a

function switch with 3 possible settings:

The room temperature will be as set

on the thermostat.

The control system must have a CFZ

programmer, put thermostat switch

into this position to engage the pro-

grammer. The temperature will be as

set on the room thermostat, but in ac-

cordance with the consumption pattern

entered.

The heating pattern in the programmer

can be overridden by moving the

switch to or .

The room temperature will be as set

on the thermostat less a setback of

5°C/9°F.

Limitation of the setting range

Behind the dial for temperature setting are two lock-

rings. These can be moved as shown if the thermo-

stat setting range is to be narrowed.

Warning: Changes or modifications to this unit not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

(70°F)

FCC ID: PGBTYPE-CFR , CAN 3934104209

This device complies with Part 15 of the FCC Rules and

with RSS-210 of Industry Canada:

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Setback

5°C (9°F)

088R0228

Li 3,6V/1,9Ah

088R0228 DKCD 03/01

Registration field in

CFM

RoomThermostat

Instructions for Installation

Type CFR

Each room thermostat has a unique ID number

preventing conflicts with other thermostats. A single

room thermostat is capable of regulating several

heating outputs, provided these outputs are assigned to

the thermostat.

Assigning thermostats to output(s)

-The installation cable between room thermostat and

CFM (fig. 1) must be connected in assigning each

thermostat to the respective output(s).

-IntheLED array the firstavailable position will flash.

Outputs already assigned will not be lit (fig. 2). By

pressing OK the thermostat will be assigned to that

output. If the room thermostat is to be assigned under

another lit output, scroll to the output bymeansof the+/-

keys,then press OK.

-When the installation cable is removed, the red LED

underneath the battery cover (fig. 1) will flash for at

least one minute (Test mode).

Removal of assigned thermostat

-It is not necessary to have the installation cable in

place when removing an assigned thermostat. Once a

thermostat has been removed, it may be reassigned to

another output.

-Removal of room thermostat is done by pressing OK

for 5 seconds, then the entire LED array will be lit.

Scroll to the specific room thermostat to be removed

with the +/- button,and press OK for 5 seconds. The

thermostat has now been removed.

Test of room thermostat

If a defect in a room thermostat is suspected, the fol-

lowing test may be carried out:

- Set the thermostat to the highest temperature.

- Move the function switch on the side of the room ther-

mostat to a new position.

- If the LED underneath the battery cover (fig. 1) flashes

quickly for 3 minutes, the room thermostat is OK.

Table of contents

Other Danfoss Thermostat manuals

Danfoss

Danfoss ECL Comfort 310, P330 User manual

Danfoss

Danfoss TP5001 series User manual

Danfoss

Danfoss TP5001RF User manual

Danfoss

Danfoss TP9000 Guide

Danfoss

Danfoss DEVIreg Room 140F1161 User manual

Danfoss

Danfoss HC8000 Series User manual

Danfoss

Danfoss ECtemp Touch User manual

Danfoss

Danfoss Icon Master User manual

Danfoss

Danfoss Living Eco User manual

Danfoss

Danfoss GreenCon RC-C2 User manual

Danfoss

Danfoss RT 14E User manual

Danfoss

Danfoss GreenCon RC-T2 User manual

Danfoss

Danfoss DEVIreg 330 User manual

Danfoss

Danfoss KP 61 User manual

Danfoss

Danfoss TP6000M User manual

Danfoss

Danfoss LinkFT User manual

Danfoss

Danfoss RESD Series User manual

Danfoss

Danfoss FH-WS User manual

Danfoss

Danfoss HC75A-1 Operating manual

Danfoss

Danfoss ECL Comfort 210 User manual

Danfoss

Danfoss RT 103 User manual

Danfoss

Danfoss SET3M Assembly Instructions

Danfoss

Danfoss ECtemp Next Plus HW User manual

Danfoss

Danfoss C67 User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide