Danfoss 088U0212 User manual
088U0212
Instructions CF-RD Room Thermostat with Display
Anleitung CF-RD Raum Thermostat mit Display
Vejledning CF-RD Rumtermostat med display
Instruction CF-RD Thermostat avec e’cran
2VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Instruction .......................3
Anleitung .......................15
Vejledning ......................26
Instruction ......................37
3VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
1. Functional Overview. . . . . . . . . . . . . . . . . . 4
2.Installation........................... 5
3. Temperature Settings . . . . . . . . . . . . . . . . . 7
4. Transmission Test . . . . . . . . . . . . . . . . . . . . . 9
5.Mounting ............................ 10
6. Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . 11
7.Specications......................... 12
8. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 13
9. Figures and illustrations. . . . . . . . . . . . . . . 48-49
Index
4VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Front - g. 1
Up/down selector
Push button
Red LED (behind the cover)
LED modes
Permanent light ON
No light OFF
Slow ashing Flashes
Fast ashing Flickers
Back - g. 2
Back plate
Back plate lock/unlock (turn 90°)
Screw hole for wall mounting
Battery placement
Screw and wall plug
Note: To activate batteries please remove enclosed
strips from batteries
1. Functional Overview
5VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Note:
• To activate batteries in the Room Thermostat
please remove enclosed strips from the batteries.
• The assignment of the Room Thermostats to the
Master Controller should be within 1½m distance
Activate Install mode on
Master Controller - g. 1.
• Use the menu selection button to select the
Install mode. Install LED ashes
• Activate Install mode by pressing OK . Install
LED goes ON
Activate Install mode on
Room Thermostat
• Press the push button . LED and icker
during communication
Select output on Master Controller
• All available output LEDs on Master Controller
light up, and the rst of them ashes
• Press output selection button , select desired
output (ashes) and accept with OK
• All output LEDs go OFF. Selected output
stays ON shortly
2. Installation
6VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Room Thermostat installation status
• Satisfactory - LED goes OFF
• Not satisfactory - LED ashes 5 times
Note: A Room Thermostat can be assigned to sev-
eral outputs if needed
7VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Digital Display - g. 1
Set value adjustment
Minimum temperature limitation
Maximum temperature limitation
Lock icon (settings locked from
Remote Controller, CF-RC)
Transmission link icon
Low battery indicator
Alarm icon
Timer icon (time & zone control set
from Remote Controller, CF-RC)
3. Temperature Settings
8VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Setting of Temperatures - g. 1
• The actual room temperature is shown in the
display as default
Setting of room temperature
• Press the up/down selector to set the de-
sired room temperature value, SET is shown in
the display
• When releasing the up/down selector the
display returns to actual room temperature
Room temperature limitation
• Press and hold the push button until SET
MAX is shown in the display
• Press the up/down selector to set the maxi-
mum room temperature limitation
• Press the push button shortly, SET MIN is
shown in the display
• Press the up/down selector to set the mini-
mum room temperature limitation
• Press the push button shortly, the actual
room temperature is shown in the display
9VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Initiate transmission test on Room
Thermostat - g. 1
• Press the push button
• LED goes ON
Link test is satisfactory
• LED goes OFF
Link test is unsatisfactory
• LED ashes 5 times
No Link connection to Room Thermo-
stat
• Try to relocate Room Thermostat in the room
• Or install Repeater Unit (CF-RU) and locate be-
tween Master Controller and Room Thermostat
Note: Master Controller output LED(s) connect-
ed to the room thermostat, ash(es) during Link test
4. Transmission Test
10 VI.UH.Q1.52 Produced by Danfoss Floor Heating Hydronics 08.2008
Instruction CF-RD Room Thermostat with Display
Placing the Room Thermostat - g. 3
! Wherever possible, the room thermostat should
be installed at a place where the eect of sunlight,
draught, other heaters (eg. TV’s), etc. is avoided.
Mounting with screws - g. 2
5. Mounting
Other manuals for 088U0212
1
Table of contents
Languages:
Other Danfoss Thermostat manuals
Danfoss
Danfoss TP5000 RF Si User manual
Danfoss
Danfoss HC6000 User manual
Danfoss
Danfoss DEVIreg Smart User manual
Danfoss
Danfoss TP75 User manual
Danfoss
Danfoss DEVIreg 330 User manual
Danfoss
Danfoss TP4 Assembly Instructions
Danfoss
Danfoss RET M Operating instructions
Danfoss
Danfoss SH-E01 User manual
Danfoss
Danfoss RET2000 B User manual
Danfoss
Danfoss ECL Comfort 310, P314 User manual
Danfoss
Danfoss REP24CO User manual
Danfoss
Danfoss ECL Comfort 310 User manual
Danfoss
Danfoss RET MD Troubleshooting guide
Danfoss
Danfoss RET2001 User manual
Danfoss
Danfoss Link FT User manual
Danfoss
Danfoss CET2000B-RF User manual
Danfoss
Danfoss ECL Comfort 210 User manual
Danfoss
Danfoss SET 3E User manual
Danfoss
Danfoss ECL Comfort 110 User manual
Danfoss
Danfoss GET B-RF Guide
Popular Thermostat manuals by other brands
Saswell
Saswell SAS920XWHB-7-S-RF User manual and warranty card
Aircalo
Aircalo TFP1-ET85P2 operating manual
Honeywell
Honeywell CM721 user manual
Carrier
Carrier DEBONAIR 33CS Installation and operating instructions
Lennox
Lennox iHarmony Zone Thermostat Installation and setup guide
Gemtech
Gemtech GT7000 Operation
