Danby DPA120B1WB Assembly instructions

Danby Products Limited, Ontario, Canada N1H 6Z9

Danby Products Inc., Findlay, Ohio, USA 45840

-ODELs-ODÕLEs-ODELO

30.12.13

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET SOINS DE

PROPRIÈTAIRE

PORTABLE AIR CONDITIONER

CLIMATISEUR PORTATIF

MODEL MODÈLE DPA120B1WB

DPA140B1WB

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDEA VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

-------------------------------------------------------------------------------------------------------------------

POUR OBTENIR LE SERVICE SUR GARANTIE VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

-------------------------------------------------------------------------------------------------------------------

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-

ed by a qualiﬁed electrician or electrical supplier.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁches. Il doit être

branché dans une prise avec une ﬁche de mise à la terre en conformité avec le Code National de l’Électricité

et les codes et règles locales applicables. Si le prise murale n’a pas de mise à la de terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme aux Codes

Nationaux de l’Électricité, aux codes et règles locaux applicables. La ﬁche de la mise à la terre ne doit pas,

en aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais

le cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été

vériﬁée et testée par un électricien qualiﬁé ou un fournisseur de matériel électrique.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER

Owner’s Use and Care Guide

• Welcome .............................................................

• Safety Instructions ..............................................

• Identifying Parts ..................................................

• Features ..............................................................

• Operating Instructions .........................................

• Installation Instructions .......................................

• Care and maintenance ........................................

• Troubleshooting ...................................................

• Warranty ..............................................................

CLIMATISEUR PORTATIF

Guide d’utiliser et soin de propriètaire

• Bienvenue ...........................................................

• Consignes de sécurité importantes.....................

• L'Identification des pièces ....................................

• Caractéristiques ..................................................

• Consignes d’utilisation ........................................

• Instructions d’installation .....................................

• Soins et entretien ................................................

• Dépannage .........................................................

• Garantie ..............................................................

Contents

3-4

4-6

6-7

8-9

10-14

19-20

21-22

24-25

26-30

CAUTION:

PRECAUTION:

Read and follow all safety rules and

operating instructions before first use of this

product.

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

Model • Modèle DPA120B1WB / DPA140B1WB

Welcome

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

¿nd in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best of

all, you will experience these values each and every time you use your Danby appliance. That is important, because your

new appliance will be a part of your family for a long time.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

Model No:

Serial No:

Date Purchased:

NEED HELP?

Before you call for service, here are a few things you can do to

help us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide

before calling. This section helps you solve common problems

that may occur.

If you do need service, you can relax, knowing help is only a

phone call away.

Tel: 1-800-26-

(1-800-263-2629)

WARNING

Improper connection of the grounding plug can result in risk of

¿re, electric shock and/or injury to persons associated with the

appliance. Check with a quali¿ed service representative if in doubt

that the appliance is properly grounded.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY

PRECAUTIONS

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation resulting from to ignoring these instructions may cause harm or damage.

Your air conditioner should be used in such a way that it is protected

from moisture. e.g. condensation, splashed water, etc. Do not place or

store your air conditioner where it can fall or be pulled into water or

any other liquid. Unplug unit immediately if this occurs.

Always transport your air conditioner in a vertical position and place

on a stable, level surface during use. If the unit is transported laying

on it’s side it should be stood up and left unplugged for 4 hrs.

ALWAYS DO THIS

Do not operate your air conditioner in a wet room such as a bathroom

or laundry room.

Do not touch the unit with wet or damp hands.

Do not press the buttons on the control panel with anything other than

your fingers.

Do not remove any fixed components. Never use this appliance if it is

not working properly, or if it has been dropped or damaged.

Never use the plug to start and stop the unit.

Do not cover or obstruct the inlet or outlet grilles.

Do not use hazardous chemicals to clean or come into contact with

the unit. Do not use the unit in the presence of inflammable

substances or vapour such as alcohol, insecticides, petrol,etc.

Do not allow children to operate the unit unsupervised.

Do not use this product for functions other than those described in this

instruction manual.

NEVER DO THIS

Turn off the unit when not in use.

Always contact a qualified person to perform repairs. If the power cord

is damaged it must be repaired by a qualified technician.

Keep clearance of at least 30cm (1 foot) all around the unit from walls,

furniture and curtains, to allow for adequate air flow.

If the air conditioner is knocked over during use, turn off the unit and

unplug it immediately.

Always use the switch on the control panel to turn the unit on or off.

Portable air conditioners exhaust large amounts of room air. Always

ensure an adequate supply of make-up air to operate efficiently.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation resulting from to ignoring these instructions may cause harm or damage.

ENERGY SAVING

TIPS

• Use the unit in the recommended room size.

• Locate the unit where furniture cannot obstruct the air flow.

• Keep blinds/curtains closed during the sunniest part of the day.

• Keep the filters clean.

• Keep doors and windows closed to keep cool air in and warm air out

(cooling mode).

OPERATING

CONDITION

The air conditioner must be operated within the temperature range

indicated below:

MODE

COOL

DRY

ROOM TEMPERATURE

17°C (62°F) ~ 35°C (95°F)

13°C (55°F) ~ 35°C (95°F)

5°C (41°F) ~ 30°C (86°F)

<30°C / 86°F

(*) Optional feature, some models may not have this feature.

Note: Performance may be reduced outside of these operating

temperatures.

TOOLS FOR WINDOW

KIT INSTALLATION

1. Screwdriver (medium size, Phillips)

2. Tape measure or ruler

3. Knife or scissors

4. Saw (In the event that the window kit needs to be cut down in size

because the window is too narrow for direct installation).

See www.danby.com for general instruction guide.

Identifying Parts

WARNING

• Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.

• Avoid fire hazard or electric shock. Do not use an extension cord

or an adaptor plug. Do not remove any prong from the power

cord.

ELECTRICAL

INFORMATION WARNING

• Be sure the electrical supply is adequate for the model you have

chosen. This information can be found on the serial plate, which

is located on the side of the cabinet and behind the grille.

• Be sure the air conditioner is properly grounded. To minimize

shock and fire hazards, proper grounding is important. The

power cord is equipped with a three-prong grounding plug for

protection against shock hazards.

• Your air conditioner must be used in a properly grounded wall

receptacle. If the wall receptacle you intend to use is not

adequately grounded or protected by a time delay fuse or circuit

breaker, have a qualified electrician install the proper receptacle.

• Ensure the receptacle remains accessible after the unit is

installed.

*HEAT (heat pump type)

*HEAT (electrical or heat pump)

Identifying Parts

ACCESSORIES

EH T

EDOM FDE

GNIWS

REMIT

MONOCE

O/NO

FFORE

MIT

RESE TLOC K

OBRUT

Foam seal

Remote Controller and

Battery (For remote control

models only) 1set

Drain hose 1pc

NOTE:

• Check all the accessories are included in the package and please refer to the installation

instructions for their usage.

NOTE: All the illustrations in this manual are for explanation purpose only. Your air conditioner

may be slightly different.

UNIT STRUCTURE

FRONT

Control Panel

Horizontal louver blade

(adjusts automatically)

Caster

Carrying handle

(both sides)

Fig.1

PARTS PART NAME QUANTITY

Exhaust hose and adaptor

1 set

slider kit and screws

6/pc

B (round mouth); Window

Identifying Parts

REAR

Upper air filter (Behind the grille)

Upper air intake

Air outlet

Drain outlet (only for pump heating model)

Power cord outlet

Power cord buckle (used only when storing

the unit)

Bottom tray drain outlet

Power plug socket (use only when storing

the unit)

Lower air filter (behind the grill)

Lower air intake

Drain outlet

Fig.2

Features

ELECTRONIC CONTROL

INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel

and remote controller and all its functions, then use the icons to change

the functions you desire.

The unit can be controlled by the unit control panel alone or with the

remote controller .

NOTE: This manual does not include Remote Controller Operations, see

the <<Remote Controller Instructions>> packed with the unit for details.

Fig.3

Features

ELECTRONIC CONTROL

INSTRUCTIONS 2

POWER button

Turns power on/off.

SLEEP button

Used to initiate the SLEEP operation.

FAN button

MODE select button

Selects the appropriate operating mode. Each time you press the but-

ton, a mode is selected in a sequence that goes from AUTO, COOL,

DRY, FAN and HEAT(select models only). The mode indicator light

illuminates depending on the mode settings.

TIMER button

Used to initiate the AUTO ON start time and AUTO OFF stop time pro-

gram, in conjuction with the UP and DOWN buttons.

SWING button

Used to initiate the Auto swing feature. When operating press the

SWING button to stop the louver at the desired angle.

LED DISPLAY

Shows the set temperature in °C or °F and the Auto-timer settings.

While on DRY and FAN modes, it shows the room temperature.

Error codes:

E1 - Room temperature sensor error-Unplug the unit and plug

it back in. If error repeats, call for service.

E2 - Evaporator temperature sensor error- Unplug the unit and

plug it back in. If error repeats, call for service.

E4 -Display panel communication error - Unplug the unit and

plug it back in. If error repeats call for service.

P1 -Bottom tray is full - Connect the drain hose and drain the

collected water away. If error repeats, call for service.

Controls the fan speed. Press to toggle between three fan speeds: LOW

(press 1 time), MEDIUM (press 2 times) and HIGH (press 3 times). The

fan speed indicator light indicates the corresponding fan setting. Press the

button a fourth time to initiate AUTO-FAN mode. In this mode, all three

indicator lights will light up.

E3 - Condenser temperature error - Unplug the unit and plug it

back in. If error repeats call for service.

UP and DOWN buttons

Used to adjust (increase /decrease) temperature settings (1°C/2°F

increments) in a range of 17°C(62°F) to 30°C(86°F) or the TIMER set-

ting in a range of 0~24hrs. The control is capable of displaying

temperature in degrees Fahrenheit or degrees Celsius. To convert

from one to the other, press and hold the Up and Down buttons at the

same time for 3 seconds.

Operating Instructions

OPERATING MODES

ELECTRONIC CONTROL

INSTRUCTIONS (con’t)

COOL mode

- Press the "MODE" button until the "COOL" indicator light comes on.

- Press the ADJUST buttons "up + " or "down - " to select your desired

room temperature. The temperature can be set within a range of

17°C-30°C / 62°F-86°F.

- Press the "FAN SPEED" button to choose the fan speed.

HEAT mode (select models only)

- Press the "MODE" button until the "HEAT" indicator light comes on.

- Press the ADJUST buttons "up +" or "down -" to select your desired

room temperature. The temperature can be set within a range of

17°C-30°C / 62°F-86°F.

- Press the "FAN SPEED" button to choose the fan speed. For some

models, the fan speed can not be adjusted under HEAT mode.

AUTO mode

- When you set the air conditioner in AUTO mode, it will automatically

select cooling, heating (select models only) or fan only operation

depending on what temperature you have selected and the room

temperature.

- Under AUTO mode, you can not select the fan speed.

FAN operation

- Press the "MODE" button until the "FAN” indicator light comes on.

TIMER operation

- To initiate the “Auto-stop” program: When the unit is on, press the Timer

button, the TIMER OFFindicator light will illuminate.

- To initiate the “Auto-start” program: When the unit is off, press the Timer

button, the TIMER ON indicator light will illuminate.

- Press or hold the “UP ” or “DOWN ” button to change the Auto time by

0.5 hour increments, up to 10 hours, then at 1 hour increments up to 24

hours.The control will count down the time remaining until the unit starts.

- The selected time will register in 5 seconds and the system will

automatically revert back to display the previous temperature setting.

- Turning the unit ON or OFF at any time or adjusting the timer setting

to 0.0 will cancel the Auto Start/Stop timed program.

- When a malfunction (E1, E2, E3, E4, or P1) occurs, the Auto Start/Stop

timed program will also be cancelled.

- Press the "FAN SPEED" button to choose the fan speed (1 time for LOW,

2 times for MEDIUM, 3 times for HIGH, 4 times for AUTO-FAN).

- The corresponding fan speed indicator light for each speed lights up. All

three indicators are lit up when AUTO-FAN is selected.

- The temperature cannot be adjusted.

- Do not use the window hose in this mode.

- The air conditioner will adjust the room temperature automatically to

the temperature point set by you.

Other manuals for DPA120B1WB

This manual suits for next models

Table of contents

Languages:

Other Danby Air Conditioner manuals

Danby

Danby DAC060EUB7GDB Assembly instructions

Danby

Danby Premiere DPAC12012P Assembly instructions

Danby

Danby DPA100B6WDB User manual

Danby

Danby DAC080EB3GDB Assembly instructions

Danby

Danby DAC120EB3WDB User manual

Danby

Danby DPA080UB1GDB Assembly instructions

Danby

Danby DPA060BACBDB Assembly instructions

Danby

Danby DAC080ECB2GDB Assembly instructions

Danby

Danby DPTA090HEB1WDB User manual

Danby

Danby DAC150EB1GDB Assembly instructions

Danby

Danby DPA120DBAUGDB User manual

Danby

Danby DPA120E3WDB-6 User manual

Danby

Danby DPAC11012BL Assembly instructions

Danby

Danby DAC080BHUWDB User manual

Danby

Danby DPAC5009 Assembly instructions

Danby

Danby dac12077ee Assembly instructions

Danby

Danby DPA140HBACBDB User manual

Danby

Danby DPA120B1WB Assembly instructions

Danby

Danby DAC10011E Assembly instructions

Danby

Danby DPA060BAUWDB User manual

Danby

Danby DAC080ECB3GDB Assembly instructions

Danby

Danby DAC180BBUWDB Assembly instructions

Danby

Danby DPAC7099 Assembly instructions

Danby

Danby DAC060BBCWDB Assembly instructions

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual