dallmeier PVS IV Operating and maintenance instructions
1
Dallmeier electronic
PView Station PVS IV
Rev. 1.0.0 / 080528
English
Workstation
PVS IV
Installation and Configuration
2
Dallmeier electronic
PView Station PVS IV
Copyright © Dallmeier electronic GmbH & Co.KG
All rights reserved. This document may not be copied, photocopied, reproduced, translated, transferred
to an electronic medium or converted to a machine-readable form either whole or in part without rst
receiving written permission from Dallmeier electronic GmbH & Co.KG.
We reserve the right to make technical modications.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due to
minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused
by intention or gross negligence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
D 93051 Regensburg, Germany
www.dallmeier-electronic.com
Microsoft, ActiveX, DirectX, Internet Explorer, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corpo-
ration in the United States and/or other countries.
All other trademarks are the property of their respective owners.
3
Dallmeier electronic
PView Station PVS IV
Table of contents
1 This document 4
1.1 Validity 4
1.2 Documents 4
1.3 Conventions 4
2 Safety instructions 6
3 General notes 8
3.1 Scope of delivery 8
3.2 Transportation and packaging 8
3.3 Appropriate use 9
3.4 Performance features 9
3.5 Warranty 9
3.6 Certications 9
4 Installation and mounting 10
4.1 Requirements at the installation site 10
4.3 Installation in a 19’’ standard rack 11
5 Views and connection assignment 12
5.1 Front view 12
5.2 Connection assignment 13
6 Connection and commissioning 14
6.1 Connection of monitors 14
6.3 Commissioning 14
7 Conguration 16
7.1 Periphery 16
7.2 Monitors 16
7.3 Software 17
8 Maintenance 18
8.1 Changing the lter mat 18
8.2 Cleaning 18
9 Appendix 19
9.1 Technical data 19
9.2 Technichal drawing 20
4
Dallmeier electronic
PView Station PVS IV
1 This document
1.1 Validity
This document applies to the Workstation PVS IV. It has been produced on the basis of the
following versions:
lMicrosoft®Windows®XP®, SP2, incl. all the latest security updates
lPView: 5.6.4.29d
lPGuard 4.0.2.13d SP F
lSmartGUI + Editor advance 1.1.2
lProcessViewer 2.0.13
1.2 Documents
InstallationandConguration(thisdocument)
The document entitled “Installation and Conguration“ contains detailed descriptions of the
installation, connection, commissioning and conguration of the device. General notes on
the product and technical data are additionally provided.
The target audience is exclusively specially trained and authorized professionals (“instal-
lers“).
1.3 Conventions
This document contains various warning words and symbols that indicate potential sources
of danger. Various symbols and formats are used to maintain the clarity of the document.
DANGER
The warning word DANGER denotes an immediate danger that
may cause death or serious injury if it is not averted.
WARNING
The warning word WARNING denotes a possible danger that
may cause death or serious injury if it is not averted.
CAUTION
The warning word CAUTION denotes a possible danger that
may cause minor injury if it is not averted.
5
Dallmeier electronic
PView Station PVS IV
IMPORTANT
The word IMPORTANT denotes information for preventing
damage, incorrect congurations or incorrect actions.
NOTE
A NOTE offers information on principles, special features and
efcient procedure as well as general recommendations.
Expression Expressions in bold and italics generally indicate a control
element on the device (switches or lables) or on its users
interface (buttons, menu, entries).
6
Dallmeier electronic
PView Station PVS IV
2 Safety instructions
Only use this unit if it is technically in proper working order, to the intended purpose and
while keeping safety and potential dangers in mind. Have malfunctions or damages elimi-
nated immediately!
Appoint a professional
Installation, mounting, connection, start-up and conguration of the unit may only be carried
out by trained and authorized professionals (installers).
Unless otherwise expressly specied, this also applies to the maintenance, testing and repair.
In doing so the regulations of the DIN VDE 0701 series of standards (repair, modication
and inspection of electrical appliances) must be followed in addition.
System security
In order to provide best compatibility and integratability the system is delivered without
separate software for protection against malware or data loss. Take appropriate measures
for malware protection. Regularly make backups to avoid data loss. Dallmeier electronic
accepts no liability for damage caused by insufcient system security.
Read and pay attention to the documents
Carefully and completely read the documents included in delivery. Always pay attention to
the provided instructions, notes and warnings.
Regulations surveillance systems
The use of video and audio surveillance systems is strictly regulated in most countries.
Therefore, inform yourself on laws and regulations that govern individual applications be-
fore using the unit. Ensure compliance with these laws and regulations and also observe
regulations regarding data, working and environmental protection.
Regulations data protection
This unit can store data that may be subject to data protection. The collecting, recording,
processing or disclosure of such data may be forbidden and thus have legal consequences.
Therefore, inform yourself on data protection laws and regulations that govern individual
applications before using the unit. Ensure compliance with this laws and regulations.
Donotmakemodications
Do not make any modications to the unit (neither to the software nor the hardware) without
consulting Dallmeier electronic. Improper modications can cause malfunctions or damages.
Dallmeier electronic accepts no liability for damages resulting from unauthorized or improper
modications to the unit.
Protection against condensation water
If the unit is brought from a cold to a warm environment, condensation water can form inside
the unit. Short-circuits may then lead to damage to the system. Wait up to 8 hours for the
unit to reach room temperature before starting it up.
7
Dallmeier electronic
PView Station PVS IV
Observe the rated voltage
The unit can be damaged or destroyed by the application of an incorrect voltage.
The mains voltage must always match the rated voltage of the unit. The rated voltage is
specied on the rating plate of the unit.
Observe ratings
Unsuitable ambient conditions and improper installation (mainly too high ambient tempera-
ture and insufcient ventilation) may reduce the unit’s life cycle. Ensure compliance with the
stated operating conditions (see technical data), requirements at the installation site and, if
applicable, maintenance regulations.
Expansion components/peripheral devices
Use only expansion components conforming with the technical data of the unit. Inappropriate
peripheral devices may result in the violation of local laws and regulations and damages
to the unit. Furthermore, the use of peripheral devices that are not certied by Dallmeier
electronic results in loss of warranty. In case of doubt, contact the sales partner responsible
for your area.
Do not move while in operation
Strong vibrations can cause damage to the unit, in particular to the hard disk(s). Therefore,
do not bump the unit or move it in a jerky motion while in operation. Instruct the cleaning
personnel accordingly if necessary!
Do not open the unit
Do not open the housing of the unit. There are no components inside the unit that require
maintenance by the user. The inspection, maintenance and repair with an open housing
must only be carried out by trained and authorized professionals (installer).
Penetration of foreign bodies and liquids
No objects or liquids may be allowed to get into the device. In this case, immediately dis-
connect the unit from the power supply (pull out the power plug). Please contact the sales
partner responsible for your area.
Measures to be taken in the event of damage and burnt smell
If you notice burnt smell or formation of smoke from a unit, immediately disconnect it from
the power supply (pull out the power plug). Please contact the sales partner responsible
for your area.
Disposal
Disconnect the unit from the power supply. Remove all connected units and system com-
ponents. Return the unit to your respective sales partner.
8
Dallmeier electronic
PView Station PVS IV
3 General notes
3.1 Scope of delivery
Included in the standard scope of delivery is:
1 x Workstation PVS IV
1 x Power cable
1 x Ethernet cable 3 m
1 x Keyboard
1 x Mouse
1 x Spare set of lters (5 lters)
1 x D-SUB jack
1 x D-SUB connector
1 x 8-pin Weidmüller plug connector
1 x 10-pin Weidmüller plug connector
1 x Nero BurningROM (OEM-CD)
1 x PView license
1 x PGuard license
1 x SmartGUI + Editor advance license
1 x USB license dongle
1 x Documentation PView (in print)
1 x Documentation PGuard (in print)
1 x Documentation SmartGUI + Editor advance (in print)
1 x Documentation PVS IV „Installation und Konguration“ (CD, inclusive software
documentations)
The scope of delivery may differ depending on the ordered equipment or device variant.
The device’s range of functions depends on the ordered equipment or device variant and
may therefore not correspond with this document’s content. Certain functions and features
may require an activation that is subject to costs.
3.2 Transportation and packaging
Store the original packaging for transportation at a later date. Dallmeier electronic is not
responsible for damage resulting from unprofessional/improper transportation. The goods
should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufciently
protects the unit against damage, moisture, heat and cold.
9
Dallmeier electronic
PView Station PVS IV
3.3 Appropriate use
The PView Station PVS IV is a stand-alone evaluation and management station for Dall-
meier digital recorders (DIS, DLS, DMS, DVS). Its powerful CPU enables a smooth video
display with high image quality in up to 6 independent splits.
The connection between PVS IV and one or more Dallmeier recorders is realised via an IP
based network (ISDN optional). All necessary hardware and software is already installed
and pre-congured.
3.4 Performance features
The PView Station PVS IV is especially characterised by the following functions and pro-
perties:
lOperating system Windows®XP®
lDVD-R/RW writer
l1000 Mbit LAN interface
lHDD capacity min. 160 GB
l3 external USB 2.0 ports
lMouse and keyboard included
lIntegrated software PView, PGuard, SmartGUI advance
lSmooth video display in up to 6 splits with high image quality
lSoftware protected by USB dongle
lNumerous hard and software options
NOTE
For detailed information please refer to the chapter technical
data.
3.5 Warranty
The terms and conditions valid at the signing of the contract apply.
3.6 Certications
The following certications were in effect at the time this document was produced:
lCE
10
Dallmeier electronic
PView Station PVS IV
4 Installation and mounting
The PVS IV is designed for stand-alone operation. As an option it may also be installed in
a 19’’ standard rack.
4.1 Requirements at the installation site
Unfavorable local conditions may shorten the life of the product or lead to malfunctions.
Do not operate the PVS IV at places:
lwith large scale dust and dirt
lwith steam or oil vapors (e.g. kitchen)
lwith direct sunlight
lwith unsuitable ambient temperatures (see technical data)
l near sources of strong radiation, i.e. X-rays, radio transmitters or magnetic elds
lwith corrosive surroundings (e.g. gases or salt water)
l with insufcient ventilation (e. g. closed cabinet)
Comply with all the safety instructions and technical data.
4.2 Stand-alone installation
The PVS IV may be freely positioned, connected and commissioned. Attention should be
paid to the fact that all connections are freely accessible.
IMPORTANT
Danger of manipulation and sabotage.
A stand-alone installation should be made in secured rooms
with restricted access only.
Table of contents
Other dallmeier Server manuals
dallmeier
dallmeier VideoNetBox User manual
dallmeier
dallmeier VideoNetBox Assembly instructions
dallmeier
dallmeier DMS 2400 Guide
dallmeier
dallmeier VideoNetBox eXd Guide
dallmeier
dallmeier DIS-4/M SRS Guide
dallmeier
dallmeier SMAVIA appliance VideoNetBox II Guide
dallmeier
dallmeier IPS 2400 User manual
dallmeier
dallmeier SMAVIA IPS 10000 User manual
dallmeier
dallmeier SMAVIA DMS 2400 II User manual
dallmeier
dallmeier SMAVIA VideoNetBox III Assembly instructions
