Daikin ATM18MV2S User manual
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
5.0/6.0/7.1 kW Class
15000/18000 Btu/h Class
Si041254EE
Service Manual
Removal Procedure
Indoor Unit
zCooling Only zHeat Pump
ATM18MV2S FTX50GV1B
FTX60GV1B
FTE50KV19 FTX71GV1B
FTE60KV19
FTXD50FVMV
FTM15NV2S FTXD60FVMV
FTM18NV2S FTXD71FVMV
FTM50JV14 FTXD50HVMV
FTXD60HVMV
FTM50KV1V FTXD71HVMV
FTN50JV1G FTXS50FVMV
FTN50JV1G9 FTXS60FVMV
FTXS71FVMV
FTNE50LV1
FTNE60LV1 FTXS50GVMV
FTNE50MV1 FTXS60GVMV
FTNE60MV1 FTXS71GVMV
FTNE50MV14
FTNE60MV14 FTXS50KVM
FTNE50MV18 FTXS60KVM
FTNE60MV18 FTXS71KVM
FTNE50MV1V
FTNE60MV1V
FTKS50FVM
FTKS60FVM
FTKS71FVM
FTKS50FVMV
FTKS60FVMV
FTKS71FVMV
FTKS50KVM
FTKS60KVM
FTKS71KVM
Si041254EE
Removal Procedure 1
Table of Contents
1. Air Filters .................................................................................................2
2. Front Panel..............................................................................................3
3. Front Grille ..............................................................................................4
4. Horizontal Blades ....................................................................................5
5. Vertical Blade ASSYs..............................................................................6
6. Electrical Box ..........................................................................................8
7. PCBs .....................................................................................................10
8. Swing Motors ........................................................................................12
9. Indoor Heat Exchanger .........................................................................13
10.Fan Motor / Fan Rotor...........................................................................15
Note: The illustrations may be slightly different depending on the model.
Air Filters Si041254EE
2Removal Procedure
1. Air Filters
Warning Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
2
3
Open the front panel.
Release each air filter
from the 2 hooks of the
front panel.
Remove the air filter by
pulling out downward.
The air filter is not marked
for difference between the
right and left sides.
Insert the air filter with the
“FRONT” mark faced up.
When reassembling, insert
the air filter along the guides.
Be sure to fasten the hooks
when installing the air filter.
4 Remove the Titanium
apatite photocatalytic
air-purifying filter, if
available, from the 5
hooks.
The right and left filters are
interchangeable.
Some models have no
Titanium apatite
photocatalytic air-purifying
filter.
Air filter
Hook (R21150)
Front panel
Hook
Hook
(R23427)
Titanium apatite
photocatalytic
air-purifying filter
Si041254EE Front Panel
Removal Procedure 3
2. Front Panel
Warning Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1 Open the front panel
over the position where
it stops.
2 Slide the front panel to
the right and release
the left shaft.
When reassembling the front
panel, fit the right and left
shafts one by one into the
grooves and fully push them
into position.
3
4
Release the right shaft
in the same way.
Remove the front panel.
(R23428)
Front panel
(R2754)
(R2755)
Front Grille Si041254EE
4Removal Procedure
3. Front Grille
Warning Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1 Remove the 3 screws
of the front grille.
2 Unfasten the 3 hooks
on the top of the front
grille.
The convex marks (...) on
the front grille indicate the
position of the hooks.
When reassembling, make
sure that the 3 hooks are
securely fastened.
3 Pull the upper part of
the front grille out and
lift the lower part up,
and then remove the
front grille.
(R2758)
Front grille
(R17741)
(R15467)
Si041254EE Horizontal Blades
Removal Procedure 5
4. Horizontal Blades
Warning Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1
2
Bend the horizontal
blade (lower) slightly
and release the 2
center shafts.
Release the left shaft.
When reassembling, mount
the large horizontal blade to
the upper position and the
small horizontal blade to the
lower position.
3
4
Slide the horizontal
blade (lower) to the left
and release the right
shaft.
Remove the horizontal
blade (upper) in the
same way.
Installation procedure
1. Fit the horizontal blade to the
right shaft first. Make sure to
rotate the horizontal blade so
the shaft fits correctly.
2. Fit the horizontal blade to the
center and left shafts.
Left shaft
(R21152)
Center shaft
Horizontal blade
(upper)
Horizontal blade
(lower)
Right shaft
(R2766)
Vertical Blade ASSYs Si041254EE
6Removal Procedure
5. Vertical Blade ASSYs
Warning Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. For auto-swing (right and
left) models
Some models have fan
guards. Remove the fan
guards beforehand.
The unit has 3 sets of
vertical blade ASSYs linked
to one another with interlock
rods.
1 Release the right and
left shafts.
2 Unfasten the 3 hooks
for each set of vertical
blade ASSY (9 hooks).
3 Pull the vertical blade
ASSYs to the right and
remove them.
Vertical blade ASSY
(R21153)
Interlock rod
Hook
(R2768)
(R6706)
Si041254EE Vertical Blade ASSYs
Removal Procedure 7
2. For models without auto-
swing (right and left)
Each vertical blade ASSY
has 5 or 6 fins which can not
be replaced individually.
The vertical blade ASSY is
not marked for difference
between right and left.
1 Unfasten the hooks at
the upper 2 positions.
2
3
4
Unfasten the 3 hooks of
the vertical blade ASSY
by pressing them with a
flat screwdriver.
Remove the vertical
blade ASSY.
Remove the other
vertical blade ASSY in
the same way.
Step Procedure Points
(R18194)
Vertical blade ASSY
Hook
(R8022)
Hook
Electrical Box Si041254EE
8Removal Procedure
6. Electrical Box
Warning Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1 Remove the screw,
then the drip proof
plate.
2 Cut the clamp.
3
4
5
6
Pull out the indoor heat
exchanger thermistor.
Remove the screw of
the earth/ground wire.
Remove the screw of
the wire fixture.
Remove the 4 screws
of the connecting wires.
The position of the indoor
heat exchanger thermistor
varies depending on the
model.
Be careful not to lose the clip
of the thermistor.
Drip proof plate
(R2771)
(R6707)
Indoor heat exchanger thermistor
Earth/ground wire
(R19204)
Connecting
wire
Wire fixture
Clip
(R11234)
Other manuals for ATM18MV2S
1
This manual suits for next models
45
Table of contents
Other Daikin Air Conditioner manuals
Daikin
Daikin FDBQ25B5V1 User manual
Daikin
Daikin FWB Series User manual
Daikin
Daikin RXP50N5V1B How to use
Daikin
Daikin CTXM15R5V1B User manual
Daikin
Daikin FTXM50PVMA User manual
Daikin
Daikin VRV IV RXYQ TYDN Series Dimension Guide
Daikin
Daikin SUPER MULTI NX FTXS15HVJU User manual
Daikin
Daikin FTXTA30B2V1BW User manual
Daikin
Daikin FTKZ50VVMV User manual
Daikin
Daikin RXYQ8P7Y1K User manual
Daikin
Daikin FMCQ50A8VEB User manual
Daikin
Daikin FTX12WMVJU9 User manual
Daikin
Daikin Perfera RXM R Series User manual
Daikin
Daikin HXHD125A Instruction manual
Daikin
Daikin FTXM85PAVMA User manual
Daikin
Daikin ERQ Series User manual
Daikin
Daikin RZQG71L8V1B User manual
Daikin
Daikin FMDQ50A7V3B User manual
Daikin
Daikin FXMQ72MVJU User manual
Daikin
Daikin Siesta ATXC20BV1B User manual
Popular Air Conditioner manuals by other brands
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
Hisense
Hisense 7K Use and Installation Instructions
Frigidaire
Frigidaire FFRE0533S1E0 Use & care guide
