Dahua Technology HFW5241E-ZE User manual

IR Bullet Network Camera

Quick Start Guide

V1.0.

2ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.

Quick Start Guide

Foreword

General

This manual introduces the functions, installation and operations of the camera.

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual.

Signal Words Meaning

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

Indicates a potential risk which, if not avoided, may result in

property damage, data loss, lower performance, or unpredictable

result.

Provides additional information as the emphasis and supplement to

the text.

Revision History

Version Revision Content Release Date

V1.0.2 Updated "Important Safeguards and Warnings." April 2021

V1.0.1 Modified "3.1 Packing List." March 2019

V1.0.0 First release. March 2018

About the Manual

The manual is for reference only. If there is inconsistency between the manual and the actual

product, the actual product shall prevail.

We are not liable for any loss caused by the operations that do not comply with the manual.

The manual would be updated according to the latest laws and regulations of related regions.

For detailed information, see the paper manual, CD-ROM, QR code or our official website. If

there is inconsistency between paper manual and the electronic version, the electronic version

shall prevail.

All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the manual. Please

contact the customer service for the latest program and supplementary documentation.

There still might be deviation in technical data, functions and operations description, or errors

in print. If there is any doubt or dispute, please refer to our final explanation.

Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

Quick Start Guide

All trademarks, registered trademarks and the company names in the manual are the properties

of their respective owners.

Please visit our website, contact the supplier or customer service if there is any problem

occurred when using the device.

If there is any uncertainty or controversy, please refer to our final explanation.

Quick Start Guide

III

Important Safeguards and Warnings

Electrical safety

All installation and operation should conform to your local electrical safety codes.

The power source shall conform to the Safety Extra Low Voltage (SELV) standard, and supply

power with rated voltage which conforms to Limited Power Source requirement according to

IEC60950-1. Please note that the power supply requirement is subject to the device label.

Make sure the power supply is correct before operating the device.

A readily accessible disconnect device shall be incorporated in the building installation wiring.

Prevent the power cable from being trampled or pressed, especially the plug, power socket and

the junction extruded from the device.

Environment

Do not aim the device at strong light to focus, such as lamp light and sun light; otherwise it

might cause over brightness or light marks, which are not the device malfunction, and affect the

longevity of Complementary Metal-Oxide Semiconductor (CMOS).

Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or

the locations with strong electromagnetic radiation or unstable lighting.

Keep the device away from any liquid to avoid damage to the internal components.

Keep the indoor device away from rain or damp to avoid fire or lightning.

Keep sound ventilation to avoid heat accumulation.

Transport, use and store the device within the range of allowed humidity and temperature.

Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

Pack the device with standard factory packaging or the equivalent material when transporting

the device.

Install the device in the location where only the professional staff with relevant knowledge of

safety guards and warnings can access. The accidental injury might happen to the

non-professionals who enter the installation area when the device is operating normally.

Operation and Daily Maintenance

Do not touch the heat dissipation component of the device to avoid scald.

Carefully follow the instructions in the manual when performing any disassembly operation

about the device; otherwise, it might cause water leakage or poor image quality due to

unprofessional disassembly. Please make sure that the gasket ring is flat and properly installed

in the groove before installing the cover. Please contact after-sale service for desiccant

replacement if there is condensed fog on the lens after unpacking or when the desiccant turns

green (Not all models are included with the desiccant).

It is recommended to use the device together with lightning arrester to improve lightning

protection effect.

Quick Start Guide

It is recommended connect the grounding hole to the ground to enhance the reliability of the

device.

Do not touch the image sensor directly (CMOS). Dust and dirt could be removed with air blower,

or you can wipe the lens gently with soft cloth that moistened with alcohol.

Device body can be cleaned with soft dry cloth, which can also be used to remove stubborn

stains when moistened with mild detergent. To avoid possible damage on device body coating

which could cause performance decrease, do not use volatile solvent such as alcohol, benzene,

diluent and so on to clean the device body, nor can strong, abrasive detergent be used.

Dome cover is an optical component, do not touch or wipe the cover with your hands directly

during installation or operation. For removing dust, grease or fingerprints, wipe gently with

moisten oil-free cotton with diethyl or moisten soft cloth. You can also air blower to remove

dust.

WARNING

Please strengthen the protection of network, device data and personal information by adopting

measures which include but not limited to using strong password, modifying password

regularly, upgrading firmware to the latest version, and isolating computer network. For some

device with old firmware versions, the ONVIF password will not be modified automatically along

with the modification of the system password, and you need to upgrade the firmware or

manually update the ONVIF password.

Use standard components or accessories provided by manufacturer and make sure the device is

installed and maintained by professional engineers.

The surface of the image sensor should not be exposed to laser beam radiation in an

environment where a laser beam device is used.

Do not provide two or more power supply sources for the device unless otherwise specified. A

failure to follow this instruction might cause damage to the device.

Quick Start Guide

Table of Contents

Foreword............................................................................................................................................................ I

Important Safeguards and Warnings............................................................................................................. III

1 Introduction................................................................................................................................................... 1

Cable ............................................................................................................................................................................................... 11.1

Connecting Alarm Input/output.......................................................................................................................................... 21.2

2 Network Configuration ................................................................................................................................. 4

Initializing Device....................................................................................................................................................................... 42.1

Modifying Device IP Address................................................................................................................................................. 52.2

Logging in to Web Interface................................................................................................................................................... 62.3

3 Installation..................................................................................................................................................... 8

Packing List................................................................................................................................................................................... 83.1

Dimensions................................................................................................................................................................................... 83.2

Installing Device ......................................................................................................................................................................... 93.3

3.3.1 Installation Method...................................................................................................................................................... 9

3.3.2 Installing SD Card (Optional) .................................................................................................................................... 9

3.3.3 Attaching Device.........................................................................................................................................................10

3.3.4 Installing Waterproof Connector...........................................................................................................................12

3.3.5 Adjusting Sunshield...................................................................................................................................................13

3.3.6 Adjusting Angle...........................................................................................................................................................13

Quick Start Guide

1Introduction

Cable1.1

Cable type might vary with different devices, and the actual product shall prevail.

Please waterproof all the cable joints with insulating tape and waterproof tape to avoid short

circuit and water damage. For the detailed operation, see the FAQ Manual.

Cable listFigure 1-1

For more information about cable ports, see Table 1-1.

Table 1-1 Cable information

No. Port Name Function Description

1 12V DC/24V AC

power input

Inputs 12V DC/24V AC

power. Please be sure to supply power as

instructed in the Guide.

When using 24V AC power, please connect the power input port to

2PIN converter first.

Device abnormity or damage could occur if power is not supplied

correctly.

2 Ethernet port

Connects to standard Ethernet cable.

PoE is available on select model.

3 Audio input Connects to sound-pick-up device to receive audio signal.

Quick Start Guide

No. Port Name Function Description

4 Audio output Connects to speaker to output audio signal.

5 Alarm I/O Alarm signal input/output.

For more information about I/O port, see Table 1-2.

Table 1-2 Alarm Information

Port Port Name Function

Alarm I/O

ALARM_OUT Outputs alarm signal to alarm device.

When connecting to alarm device, only the ALARM_OUT port and

ALARM_OUT_GND port with the same number can be used together.

ALARM_OUT_G

ALARM_IN1 Receives the switch signal of external alarm source.

Connect different alarm input devices to the same ALARM_IN_GND

port.

ALARM_IN2

ALARM_IN_GN

Connecting Alarm Input/output1.2

Alarm input/output is available on select models.

Connect alarm input device to the alarm input end of the I/O port, see Figure 1-2.Step 1

Device collects different states of alarm input port when the input signal is idling and being

grounded.

Device collects logic "1" when input signal is connecting to +3V to +5V or idling.

Device collects logic "0" when input signal is grounded.

Alarm inputFigure 1-2

Connect alarm output device to the alarm output end of the I/O port. The alarm output isStep 2

open-drain output, which works in the following modes.

Mode A: Level application. Alarm outputs high and low level, and the alarm outlet is OD,

which requires external pull-up resistance (10K Ohm typical) to work. The maximum

external pull-up level is 12V, maximum port current is 300mA and the default output

signal is high level (external pull-up voltage). The default output signal switches to low

level when there is alarm output (As long as the operating current below 300mA, the

output low level voltage is lower than 0.8V).

Quick Start Guide

Mode B: Switch application. Alarm output is used to drive external circuit, the

maximum voltage is 12V and the maximum current is 300mA. If the voltage is higher

than 12V, please use an additional electric relay.

Mode AFigure 1-3

Mode BFigure 1-4

The alarm input in the web interface is corresponding to the alarm input end of the I/O

port. There will be high level and low level alarm signal generated by the alarm input

device when alarm occurs, set the input mode to "NO" (default) if the alarm input signal

is logic "0" and to "NC" if the alarm input signal is logic "1".

The alarm output in the web interface is corresponding to the alarm output end of the

device, which is also alarm output end of the I/O port.

Quick Start Guide

2Network Configuration

Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For more

information, see the Web Operation Manual.

Device initialization is available on select models, and it is required at first use and after device is

being reset.

Device initialization is available only when the IP addresses of the device (192.168.1.108 by

default) and the PC stays in the same network segment.

Planning useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only, and the actual product shall prevail.

Initializing Device2.1

Double-click "ConfigTool.exe" to open the tool.Step 1

Click .Step 2

The Modify IP interface is displayed. See Figure 2-1.

Modify IP interfaceFigure 2-1

Click Search setting.Step 3

The Setting interface is displayed.

Enter the start IP and end IP of the network segment in which you want to search devices,Step 4

and then click OK.

All the devices found in the network segment are listed.

Select one or several devices which Status are Uninitialized, and then click Initialize.Step 5

This manual suits for next models

Table of contents

Other Dahua Technology Security Camera manuals

Dahua Technology

Dahua Technology IPC-HFW2431DG-4G User manual

Dahua Technology

Dahua Technology IPC-HDW5449H-ASE-D2-0280B User manual

Dahua Technology

Dahua Technology IPC-HDW5842T-ZE User manual

Dahua Technology

Dahua Technology N65CB5Z User manual

Dahua Technology

Dahua Technology IPC-HFW2531T-ZS-S2 User manual

Dahua Technology

Dahua Technology N82AL32 User manual

Dahua Technology

Dahua Technology D-IPC-HDBW1430DEP-SW-0280B User manual

Dahua Technology

Dahua Technology IPC-HFW1320S-W User manual

Dahua Technology

Dahua Technology D-IPC-HFW1430DSP-SAW-0280B User manual

Dahua Technology

Dahua Technology IPC-HDW2431T-AS-S2 User manual

Dahua Technology

Dahua Technology EZ-IP BULLET User manual

Dahua Technology

Dahua Technology Eyeball User manual

Dahua Technology

Dahua Technology IPC-HUM4431S-L4 User manual

Dahua Technology

Dahua Technology N52BM5Z User manual

Dahua Technology

Dahua Technology DH-IPC-HFW3849T1P-AS-PV-S3-BLK User manual

Dahua Technology

Dahua Technology D-IPC-HUM8441-E1-L1 User manual

Dahua Technology

Dahua Technology IPC-HFW1230S1-0280B-S5 User manual

Dahua Technology

Dahua Technology ANPR User manual

Dahua Technology

Dahua Technology IPC-HDW1531SP User manual

Dahua Technology

Dahua Technology DH-HAC-HUM1220GN-B User manual

Dahua Technology

Dahua Technology IPC-HFW81230E-Z User manual

Dahua Technology

Dahua Technology IPC-HUM4231S-L4-0280B-S3 User manual

Dahua Technology

Dahua Technology Pro IPC-HDW5241TM-AS User manual

Dahua Technology

Dahua Technology DH-IPC-HDBW3466FP-AS-AUS User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications