Daewoo DWD-NT121'S User manual

CONTENTS Page

INSTRUCTION MANUAL

DWD-NT121'S

Washing Machine Instruction Manual

A NOTE TO YOU

Thank you for buying a DAEWOO appliance.

DAEWOO washers are easy to use, save time, and help you manage your home better.

This manual contains valuable information about how to operate and maintain your washer properly and safely.

Please read it carefully.

␊Economic washing system

The washing machine determines the water level and washing time

automatically by sensing the amount of laundry and water

temperature in order to minimize energy and water consumption.

␊Low noise system

The washing machine minimizes the spinning noise level by sensing

the amount of unbalance of laundry.

␊Nano-silver sterilization washing(Option)

By applying very fine silver particles on essential parts inside, the

washer sterilizes up to 99.9% as is done by boiling wash.

␊Air bubble washing(Option)

This is an advanced technology that generates millions of air bubbles

inside the drum on washing sequence, and the bubbles dissolve the detergent particles completely and

cleanse all the soil in clothes gently and neatly.

PARTS AND FEATURES ................................................................................................................2

WASHER SAFETY ..........................................................................................................................3

INSTALLATION INSTRUCTIONS ...................................................................................................4

ELECTRICAL REQUIREMENTS ....................................................................................................6

OPERATING YOUR WASHER .......................................................................................................6

THE FUNCTIONS OF THE CONTROL PANEL ..............................................................................8

PROGRAMS AND FUNCTIONS .....................................................................................................9

WASHING PROCEDURE AND PROGRAM SELECTION ............................................................10

PRODUCT INFORMATION ...........................................................................................................12

MAINTENANCE ............................................................................................................................13

HOW TO CLEAN THE FILTER .....................................................................................................14

REMOVING STAINS .....................................................................................................................15

TROUBLE SHOOTING .................................................................................................................16

SPECIFICATION ...........................................................................................................................17

PARTS AND FEATURES

The parts and features of your washer are illustrated on the page.

Become familiar with all parts and features before using your washer.

NOTE

The drawings in the book may vary from your washer model.

They are designed to show the different features of all models coverd by this book.

Your model may not include all features.

ADJUSTABLE LEG

CONTROL PANEL

DOOR

DETERGENT CASE

INLET HOSE (COLD)

COVER PUMP

POWER CORD

HOSE DRAIN

Accessories

Inlet hose Manual Sticker holder (3EA) Guide Hose Drain

(Option)

Save these instructions

Your safety is important to us.

To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the

following basic precautions.

Understanding your responsibilities

• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same

wash. Hazardous fumes can form.

• Unplug power supply cord before attempting to service your washer.

• Do not wash fiberglass material.

Small particles can stick to fabrics washed in following loads and cause skin irritation.

• Do not spray water on the control panel of the washer.

It could cause fire or an electric shock.

• In case of the dual valve model, if you connect only one water inlet valve, the water leakage

from other water inlet valve(unconnected) can occurs.

• This appliance must be grounded.

To avoid electrical shock, use a metal pipe for the ground connection.

WASHER SAFETY

• Flammable fluids (dry-cleaning solvents,

kerosene, gasoline, etc.) should not be

used or stored in or near your washer.

Do not add flammable fluids to your wash

water.These substances give off vapors

that can create a fire hazard or explosion.

• After starting a cycle, do not reach into the

washer until all motions stop.

• Do not tamper with the controls.

• The appliance is not intended for use by

young children or infirm persons without

supervision.

• If the supply cord is damaged, it must be

replaced by the manufacturer, or its service

agent or a similarly qualified person in

order to avoid a hazard.

• If the appliance is supplied from a cord

extension set or electrical portable outlet

device it should be positioned so that it is

not subjected to splashing or ingress of

moisture.

Please ...

• Have only a qualified person install, repair,

or replace parts on washer.

• Maintain washer properly.

• Protect washer from the weather and keep

it where the temperature will not fall below

freezing.

• Do not install the washer at a place of

extremely high humidity. It could cause an

electric shock or a short circuit.

• Connect washer to the correct outlet,

electrical supply, water supply, and drain

supply.

Read all instructions before using your washer

INSTALLATION INSTRUCTIONS

Removing transit bolts

1. Before operating the washer, remove the transit

bolts(3ea) along with the rubber.

• If the bolts are not removed, it may cause heavy

vibration, noise and malfunction.

2. Unscrew the 3 bolts with the 10mm hex wrench or

spanner or cross-tip screwdriver. Keep the 3 bolts

for a later time.

• When the appliance is transported, transit bolts

will be re-used.

3. Close the holes with sticker holders supplied.

Location of washer

• Check location where the washer will be installed. Make sure you have everything necessary for correct

installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any times.

• Install the washer on the horizontal solid floor.

If the washer is installed on an unsuitable floor, it could make considerable noise,

vibrate severely and cause a malfunction. If the washer is not level, adjust leg up

or down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the washer is

installed on a carpeted floor.

• Leave some space (right & left : 2cm, rear : 10cm).

• In case of built-in installation, the distance between top of the washer and bottom of

upper plate should be at least 3mm.

Inlet hose connection

• The washer should be connected to the water mains using new hose set and old hose sets should not be

reused.

• In case of only one water inlet valve, connect the inlet hose to the cold water tap.

• Periodically check the tightness of the inlet hose.

• Make sure that the inlet hose is not kinked or folded and that it is not crushed.

1. Connect the inlet hose to

the water tap tightly.

2. Connect the inlet

hose to the water

inlet valve tightly.

Washer

approx.

2cm

Drain Hose

Laundry

Tub

• When installing the drain hose to tub(sink), secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force it back into the washer.

This will cause abnormal noise.

Level adjustment

1If the washer is installed on an

unsuitable floor, it could make

considerable noise, vibrate and

cause a malfunction.

Drain system

• Never forget to install drain hose before operating your washer.

• Open the packing box, and the drain hose is tied at backside of washer.

• If you use the laundry tub,

Top of laundry tub must be at least 60cm high and no higher than

100cm from bottom of washer.

2Adjust the level of washer using adjustable legs.

• Please check if there is any gap between the

four adjustable legs and the floor.

• Adjust the level of washer by turning

adjustable legs. And make it sure that there is

no swaying of washer.

• After the adjustment is finished, turn the fixing

nuts up tightly so that the washer maintains

the adjustment.

3Make it sure that the washer does not sway when you press

down the four corners of the washer's top plate.

adjustable leg

Fixing Nut

NOTE

There should be no swaying of washer and all the

adjustable legs should stick to the floor closely.

Laundry tub

max. 100 cm

min. 60 cm

ca. 105 cm

Hose

Retainer

Tie

strap

max. 100 cm

min. 60cm

max. 100 cm

min. 60cm

OPERATING YOUR WASHER

To obtain the best washing results, you must operate your washer properly.

This section gives you this important information.

ELECTRICAL REQUIREMENTS

• Electrical earth is required on this washer.

• If it does not fit the outlet, have a proper outlet

installed by a qualified electrician.

• Don’t earth to a gas pipe.

• Don’t change the power supply cord plug.

• Check with a qualified electrician if you are not

sure the washer is properly earthed.

For your personal safety, this washer must be earthed.

This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’.

To minimize possible shock hazard, the cord must be plugged into a mating

earthing-type wall receptacle ‘C’. If a mating wall receptacle is not available, it is

the personal responsibility and obligation of the customer to have the proper

earthed wall receptacle installed by a qualified electrician.

WARNING Electrical shock hazard : Failure to follow these instructions could result in death

or serious injury.

Recommended earthing method

• Close zippers, snaps, and hooks to avoid

snagging other items.

Remove pin, buckles, and other hard

objects to avoid scratching the washer

interior.

• Empty pockets and pull them inside out.

• Turn down cuffs and turn synthetic knits

inside out to avoid pilling.

• Tie strings and sashes to avoid tangling.

• Treat spots and stains.

(See 'REMOVING STAINS' on page 14)

Preparing clothes for washing

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

• Separate dark colors from light colors, colorfast items from non-colorfast item.

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

Color (White, Lights, Darks) Separate white clothes from colored clothes.

Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

Sorting

• Drop items into washer loosely. Items should move

easily through wash water for best cleaning and

wrinkle-free results.

• Load washer properly and select correct load size

setting.

Overloading and selecting a setting too small for

the wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of pilling)

• Mix large and small items in each load. Load evenly

to maintain washer balance.

An unbalanced load can make the washer vibrate

during spin.

• Reduce wash time when using a small load size

setting. Load with only a few small items needs

less wash time.

• Use a large load size setting to reduce wrinkling

with permanent press clothes and some synthetic

knits. These items should have more room to

move in the water than heavy items. (towels, jeans)

1Detergent case 2Adding fabric softener

• If desired, add measured liquid fabric

softener to the softener inlet.

• Pour liquid fabric softener into the

dispenser using the amount

recommended on the package.

• Do not exceed the maximum fill line.

Overfilling can cause early dispensing of

the fabric softener which could stain

clothes.

• Do not open the detergent case when

water is supplied.

• Avoid pouring fabric softener directly on

the clothes.

Adding detergent

Main wash

Pre wash

Fabric softener

• Please use only the powder detergent for the front loader washing machine.

• Please use the proper amount of detergent in conformity with the instruction of the detergent manufacturer.

• A use of a large amount of detergent more than the recommended amount can cause many soapsuds and

the overload to the motor. In addition to, this will deteriorate the washing and rinse performance.

• If too much detergent used, it can occur that the detergent directly falls down to the inside cavity. In this

case, remove the detergent case and clean the cavity after washing cycle is finished. (See page 13)

THE FUNCTIONS OF THE CONTROL PANEL

Program selector

For switching the washing machine on and off and

for selecting the program.

Can be rotated in both direction.

Even if the program selector rotates while the

program is running, the program is not changed

(except for off ) .

(All program is electronically controlled by PCB)

Indicator light

The respective indicator lights up, when the

required program segment runs.

Time delay

To pre-engage time for washing.

As the button is pressed, the delayed time is

repeated as following;

2hours ➝3hours ➝4hours ➝• • •

➝10hours ➝11hours ➝max 12hours

This option is enabled with COTTON,

SYNTHETIC, Speed Wash, Intensive, Sports

wear, Rinse+Spin and Baby care programs.

Button for options

(in addition to the program if required)

Intensive wash Extended washing time.

Rinse + Extra rinse cycle.

Rinse Hold No final spin cycle

• The indicator lamp of the buttons lights up if

options are active.

• Canceling options : Press button again.

Start/Hold button

For starting the washing cycle.

(program must have been selected)

Note

The washing time may vary by the amount of laundry, water pressure, water temperature and other

washing conditions. If an unbalanced load is detected the washing time maybe extended. (Maximum

increasing time is about 1 hour.)

By turning right the Program Selector, the program is selected in order of

COTTON 40°C ➝COTTON 40°C Eco ➝COTTON 60°C ➝COTTON 60°C/Pre ➝COTTON 95°C ➝

SYNTHETIC ➝Baby Clothing ➝Speed Wash ➝Wool Hand Wash ➝Wool 30°C ➝Sprots wear ➝

Auto 40°C ➝Rinse+Spin ➝Spin ➝Drain ➝OFF ➝COTTON COLD ➝COTTON 40°C

Spin selector

You can select the spin programs Spin 400rpm,

600rpm, 800rpm, 1000rpm, 1200rpm by pressing

the Program selector.

400rpm of spin velocity is selected automatically

with WOOL/WOOL 30°C program in order to

protect damage on laundry.

800rpm of spin velocity is selected automatically

with COTTON / SYNTHETIC / Baby Clothing /

Speed Wash / Auto 40°C / Sportswear / Spin /

Rinse+Spin programs.

*Warning : If value of unbalance is extremely high,

spin speed can't reached that r.p.m of

selected by spin selector.

PROGRAMS AND FUNCTIONS

Cold

40°C

60°C

95°C/Pre

20°C

Cold

30°C

Cold

95°C

40°C

60°C

Program

Fabric type Proper

Temp.

Degree

of soiling Option Max.

Load Remark

Colorfast garments

(shirts, night dresses,

pajamas...) and lightly

soiled white cotton

(underwear...).

Made of polyamide,

acrylic, polyester,

(synthetic or blended

fabrics).

Machine washable wool

and wool-rich textiles or

silk.

Colored laundry.

Use to clean the Tub

and Drum.

Lightly soiled fast and

thin laundry.

Baby clothes

Colorfast garments

(shirts, night dresses,

pajamas...) and lightly

soiled white cotton

(underwear...).

Lightly

soiled

Normally

to heavily

soiled

Heavily

soiled

Lightly

soiled

Lightly

soiled

Lightly

soiled

Lightly

soiled

Normally

soiled

Lightly

soiled

Normally to

heavily

soiled

Rinse+

Rinse Hold

Intensive

Rinse+

Rinse Hold

Intensive

Rinse+

Rinse Hold

Intensive

Rinse+

Rinse Hold

Intensive

Rinse+

Rinse Hold

Intensive

Rinse+

Rinse Hold

Intensive

Rinse+

Rinse Hold

Intensive

Rating

2.5kg

1.0kg

without

load

Rating

First Check if

laundry is

washable.

First Check if

laundry is

washable.

Short program

(Fast washing

time)

First Check if

laundry is

washable.

COTTON

SYNTHETIC

WOOL

Speed

Wash

Tub Clean

Sportswear

Baby care

Cotton eco

Programs and functions

NOTICE : Set program at "COTTON 40°C Eco" and "COTTON 60°C Eco" for test in accordance or

in conformity with EN60456 and IEC60456 . This option has longer setting time for

washing.

Rinse : Rinse cycle with subsequent spin cycle for rinsing hand-washed items.

Spin : Spin cycle after a program with setting ‘Rinse Hold’ is finished or for spinning hand-washed washing.

Washing and rinsing water is drained before the spin cycle.

Drain : Water is drained after program with setting ‘Rinse Hold’ is finished.

Rinse+ : Additional rinsing of laundry. Program duration and rinsing water is extended accordingly. This help to

remove residuary traces of detergent and recommended in area with very soft water.

Rinse+ option is selectable with all programs except WOOL, Spin and Drain programs.

Rinse Hold : For delicate textiles and net curtains. All program can be carried out without the final spin cycle.

The laundry is left in the final rinsing water. Before the laundry is unloaded, the ‘Drain’ or ‘Spin’

must be run by using program selector.

Rinse Hold option is not selectable with WOOL, Spin and Drain programs.

Note

The duration of the wash program can be checked on the display once the program set to start. Those

estimated wash time is indicative and it can vary depending on the quantity and the type of laundry, on the

temperature of the water supply and on the ambient temperature.

Standard programs for the Energy Label consumption values The Intensive program and Cotton 40°C Eco

program are the standard cotton programs to which the information in the label relates and they are suitable

to clean normally soiled cotton laundry and are the most efficient programs in terms of combined energy

and water consumption for washing that type of cotton laundry

WASHING PROCEDURE AND PROGRAM SELECTION

Washing Procedure

• Turn the program selector to the desired program.

The indicator light of Start/Hold button is on.

• If required, press the button(s) for option(s).

The indicator light of the selected option button is on.

• Press the Start/Hold button.

The selected program starts and the indicator light of

Start/Hold button twinkle.

Note

If you want to finish washing program during 'Rinse Hold'

process, press the 'Start/Hold' button once. Then the 'Rinse

Hold' process stops and the 'Spin' course selected

automatically. (The indicator light of 'Rinse Hold' button is

not twinkle anymore.) When you press the 'Start/Hold'

button once again, spin sequence begin. You can take out

laundry after spin course finish.

Table of contents

Other Daewoo Washer manuals

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Beko

Beko WKB 51231 PTMA manual