Daewoo DWD-FD1411 User manual

INSTRUCTION MANUAL

DWD-FD1411

Washing Machine Instruction Manual

CONTENTS Page

A NOTE TO YOU

Thank you for buying a DAEWOO appliance.

DAEWOO washing machines are easy to use, save time, and help you manage your home better.

This manual contains valuable information about how to operate and maintain your machine properly and safely.

Please read it carefully.

"Economic wash system

Using artificial intelligence, the washer uses minimum energy and

water by selecting optimal water level and washing time.

"Low noise system

The washing machine minimises the washing and spinning noises

by sensing the amount of laundry.

"Child-Lock

The Child-Lock system has been used to prevent children from pressing any buttons to change

the programme during operation.

PARTS AND FEATURES.................................................................................................................2

WASHING MACHINE SAFETY........................................................................................................3

INSTALLATION INSTRUCTIONS....................................................................................................4

INLET HOSE CONNECTION...........................................................................................................5

ELECTRICAL REQUIREMENTS .....................................................................................................6

OPERATING YOUR WASHING MACHINE.....................................................................................7

THE FUNCTIONS OF THE CONTROL PANEL...............................................................................9

WASHING PROCEDURE AND PROGRAME SELECTION ..........................................................10

MAINTENANCE .............................................................................................................................19

HOW TO CLEAN THE FILTER......................................................................................................20

REMOVING STAINS......................................................................................................................21

TROUBLE SHOOTING ..................................................................................................................22

SPECIFICATION............................................................................................................................23

Downloaded From WashingMachine-Manual.com Manuals

PARTS AND FEATURES

The parts and features of your washer are illustrated on the page.

Become familiar with all parts and features before using your washer.

Accessories

NOTE

The drawings in the book may vary from your model model.

They are designed to show the different features of all models covered by this book,

therefore your model may not include all the features that are available.

Hose drain Inlet hose Manual Cap holder

ADJUSTABLE LEGS

CONTROL PANEL

DOOR

DETERGENT COMPARTMENT

INLET HOSE

PUMP COVER

POWER CORD

HOSE DRAIN

Downloaded From WashingMachine-Manual.com Manuals

Save these instructions

Your safety is important to us.

To reduce the risk of fire, electrical shock, or injury when using your machine adhere to the

following basic precautions.

Understanding your responsibilities

• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same

wash. Hazardous fumes can form.

• Unplug power supply cord before attempting to service your machine.

• Do not wash fibreglass material.

Small particles can stick to fabrics washed in subsequent loads and cause skin irritation.

• Do not spray water on the control panel of the washer.

It could cause fire or an electric shock.

• In case of the dual valve model, with only the cold water inlet valve, connected and the water

temperature selected as hot or warm, there may be water leakage from unconnected water inlet

valve.

• This appliance must be earthed.

• Flammable fluids (dry-cleaning solvents, etc)

should not be used or stored in or near your

machine.

Do not add flammable fluids to your wash.

These substances give off vapours that can

create a fire hazard or explosion.

• Do not attempt to open the machine door

after a cycle has started.

• Do not tamper with the controls.

• The appliance is not intended for use by

young children or without supervision.

• If the supply cord is damaged, it must be

replaced by the manufacturer, or its service

agent or a similarly qualified person in order

to avoid a hazard.

• If the appliance is connected to the power

supply via an extension lead, it should not

be positioned where it could be splashed by,

or susceptible to, water.

Please ...

• Have only a qualified person install, repair,

or replace parts on washer.

• Ensure your washing machine is regularly

maintained/serviced.

• Position your washing machine where it will

be protected from the weather and keep

it where the temperature will not fall below

freezing.

• Do not install your machine at a place of

extremely high humidity. It could cause an

electric shock or a short circuit.

• Your washing machine must be connected to

the correct outlet, electrical supply, water

supply, and drain supply.

WASHING MACHINE SAFETY

Read all instructions before using your machine

Downloaded From WashingMachine-Manual.com Manuals

Removing transit bolts

1. Before operating the washer, remove the

transit bolts(3ea) along with the rubber.

• If the bolts are not removed, it may cause

heavy vibration, noise and malfunction.

2. Unscrew the 3 bolts with the 10mm hex

wrench or spanner or cross-tip screwdriver.

Keep the 3 bolts for a later time.

• When the appliance is transported, transit

bolts will be re-used.

3. Close the holes with the cap holders supplied.

Location of washer

• Check location where the machine will be installed. Make sure you have everything necessary

for correct installation.

• Do not place or store your washing machine below 0°C (32°F) to avoid any damage from

freezing.

• Never place/store laundry products on top of the machine.

• Install the washer on the horizontal solid floor.

If the washer is installed on an uneven floor, it could make

considerable noise, vibrate severely and cause a malfunction. If the

machine is not level, adjust the legs up or down for horizontal

installation.

• Ventilation openings must not be obstructed by carpeting when the

machine is installed on a carpeted floor.

• Leave some space (right & left : 2cm, rear : 10cm).

• In case of built-in installation, the distance between top of the washer and bottom of upper plate

should be at least 3mm.

INSTALLATION INSTRUCTIONS

Laundry

Tub

Washer

approx.

2cm

Drain Hose

Downloaded From WashingMachine-Manual.com Manuals

The machine should be connected to the water mains using the the new hose sets supplied.

NEVER reuse old hoses.

If using only one water tap or if there is only one water inlet valve, connect the inlet hose to the

cold water inlet valve.

Caution: Be careful not to confuse hot water inlet and cold water inlet.

For Ordinary Tap

For Screw-Shaped Tap

INLET HOSE CONNECTION

1Pull down the collar of the

inlet hose to separate it

from the water tap

adapter.

2Loosen the four screws

properly in order to fit into

water tap.

3Fit the water tap adapter

into the water tap and

tighten the four screws

evenly while pushing up

the adapter so that the

rubber packing can stick

to the water tap tightly.

4Remove the tape, and

screw tightly connector B

into connector A.

5Connect the inlet hose to

the water tap adapter by

pulling down the collar of

the hose end.

6Connect the inlet hose

adapter of the hose to the

water inlet of the washer

by turning it clockwise

until it is tight.

• Please check the rubber

packing is present inside the

inlet hose adapter of the hose.

1Connect the inlet hose to

the water tap by screwing

the connector tightly.

2Connect the connector-

inlet supplied if

necessary.

3Connect the inlet hose

adapter to the water inlet

of the machine and turn it

until tight.

*Check the packing in the inlet

TAPE

Raccorclement B

Raccorclement A

Connector

Rubber

Packing

Hose

Connector Rubber

Packing

Hose

Connector

inlet

Connector

Downloaded From WashingMachine-Manual.com Manuals

ELECTRICAL REQUIREMENTS

• An electrical earth is required on this machine

• If it does not fit the outlet, have a proper outlet

installed by a qualified electrician.

• Don’t earth to a gas pipe.

• Don’t change the power supply cord plug.

• Check with a qualified electrician if you are not

sure the machine is properly earthed.

WARNING

Recommended earthing method

Electrical shock hazard : Failure to follow these instructions could result in

death or serious injury.

For your personal safety, this machine must be earthed.

It is fitted with a supply lead (A) attached to an earthed plug (B). To prevent

electric shock occurring, this machine must be plugged into the relevant

earthed power socket (C). It is the personal responsibility and obligation of

the customer to ensure that this is in place before the washing machine is

installed.

Drain system

• Never forget to install drain hose before operating your machine.

• Open the packing box, and there is a drain hose inside the drum.

• Connect the drain hose to the drain outlet at the back side of the machine.

•

The top of the washing machine must be at least 60cm high but no higher than 100cm from floor

level.

• When installing the drain hose to tub(sink), secure it tightly with string or a plastic strap.

• Proper securing of the drain hose will protect the floor from flooding.

• When the drain hose is too long, do not force it back into the machine as this will cause

excessive noise.

Level adjustment

1If the washer is installed on an

unsuitable floor, it could make

considerable noise, vibrate and

cause a malfunction.

Downloaded From WashingMachine-Manual.com Manuals

OPERATING YOUR WASHING MACHINE

2Adjust the level of the washing machine using the adjustable legs.

• Please check if there is any gap between the

four adjustable legs and the floor.

• Turn the adjustable legs. adjust the level of the

machine and make sure that is stable.

• Adjust the fixing nuts tightly so that the washer

maintains the adjustment.

3Make it sure that the washing machine does not move when

you press down the four corners of the washer's top plate.

adjustable leg

Fixing Nut

NOTE

There should be no instability of the machine when

all the adjustable legs have been correctly balanced.

To obtain the best washing results, you must operate your machine properly.

This section gives you this important information.

• Close zippers, snaps, and hooks to avoid

snagging other items.

Remove pin, buckles, and other hard

objects to avoid scratching the machine

interior.

• Empty pockets and pull them inside out.

• Turn down cuffs and turn synthetic garments

inside out to avoid damaging the fibres.

• Tie strings and sashes to avoid tangling.

• Treat spots and stains.

(See “Removing stains” on page 21)

Preparing clothes for washing

Downloaded From WashingMachine-Manual.com Manuals

• For best cleaning and wrinkle-free results, put clothes

into the machine loosely so that they move easily in

the water.

• Load machine properly and select correct load size

setting.

Overloading and selecting a setting too small for the

wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of damage to fibres)

• Mix large and small items in each load. Load evenly to

maintain washer balance.

An unbalanced load can make the washer vibrate

during spin.

• Reduce wash time when using a small load size

setting. Loads with only a few small items needs less

wash time.

• Use a large load size setting to reduce wrinkling with

permanent press clothes and some synthetic

garments. These items should have more room to

move in the water than heavy items. (towels, jeans)

1Detergent compartment 2Adding fabric softener

• If desired, pour liquid fabric softener into the

dispenser using the amount recommended

by the manufacturers.

• Do not exceed the maximum fill line.

Overfilling can cause early dispensing of the

fabric softener which could stain clothes.

• Do not open the detergent case when water

is supplied.

• Avoid pouring fabric softener directly on the

clothes.

3Please use only the powder detergent for the front loader washing machine.

• Please use the proper amount of detergent in conformity with the instruction of the detergent

manufacturer.

• A use of a large amount of detergent more than the recommended amount can cause many

soapsuds and the overload to the motor. In addition to, this will deteriorate the washing and rinse

performance.

Adding detergent

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together.

• Separate dark colours from light colours, colourfast items from non-colourfast items.

Sorting

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

Colour (White, Lights, Darks) Separate white clothes from coloured clothes.

Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

Main wash Pre wash

Fabric softener

Downloaded From WashingMachine-Manual.com Manuals

Press this switch to turn the power on or off.

Operation and temporary stop is repeated as it is pressed.

When you want to change program in operating;

press the “Start/Hold” button #Select the program that you want to change #press the

“Start/Hold” button again.

You can select the course you want, and each lamp is turned on when that course is selected.

For the more detailed information, please refer to the page 11~18.

It can be used to adjust temperature of water according to types of the load to be washed.

As the button is pressed, temperature of water is selected by

Cold #30˚C #40˚C #60˚C #95˚C

By pressing the spin button, the spin speed can be chosen.

Rinse Hold •

Is selected by pressing the spin button repeatedly. This function leaves clothes

in the machine; suspended in the water after a rinse without entering into spin.

• To proceed through to a drain or spin, after the Rinse Hold function is

completed, use spin button.

Spin only • If you want only spin, you can operate spin only. (See page 18.)

Crease Care • If you want to prevent crease, select this button with spin speed.

Rinse+ • Is used to add a rinse, which may assist in removing traces of detergent residue.

• By selecting Rinse+ function, the rinse time and the rinse water are increased.

Pre-Wash • The washer operates one additional wash and spin before the main wash.

• If the laundry is heavily soiled, Pre-Wash course is effective.

• Pre-Wash is available in Cotton and Synthetic programs.

All courses have pre-set washing times, but Time Save decreases it to 10 minutes.

Each time this button is pressed the watch icon is repeated on and off. When it is on, the Time

Save function is set. Time Save is available in Cotton, Eco and Synthetic programs.

It can be used to pre-engage time for wash.

Use this function when you want to protect any accident occurring from handling of washer by a child.

During an operation of washer, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously.

In Child Lock mode, no button functions except Power button.

In Child Lock mode, press ‘Time Save’ and ‘Time Delay’ buttons simultaneously like setting Child

Lock and Child Lock is cancelled.

To change to the desirde program, while in Child Lock mode;

1. Press both the Time save and Time delay buttons together once again.

2. Press the Start/Hold button.

3. Select the desired program and press the

Start/Hold button again.

THE FUNCTIONS OF THE CONTROL PANEL

* The Child Lock will be cancelled when power is off.

Change

the desired

program

Downloaded From WashingMachine-Manual.com Manuals

1. COTTON IS AUTOMATICALLY SELECTED WHEN THE POWER BUTTON IS PRESSED.

• Press the Power button to start.

• Press the Start/Hold button

• Initial cycle:

- Programme : Cotton

- Wash : main wash

- Rinse : 3 times

- Spin : 800 rpm

- Water temperature : 40˚C

WASHING PROCEDURE AND PROGRAMME SELECTION

2. MANUAL SELECTION

• Press the Power button to start

• Select the cycle you want by turning the programme dial and pressing each button.

• Press the Start/Hold button.

3. TIME DELAYED WASHING

• A washing cycle may be programmed to finish up to 12 hours later.

For example, should you wish to delay the wash so that it will finish in eight hours' time:

- Press the Time Delay Button

* Each pressing of the button advances time delay by one hour.

• Now the timer is set.

• If you want to check the selected programme, press the “Start/Hold” button again.

• Preparing washing before starting “Time Delay”;

- Load laundry and close the door

- Place the detergent and fabric softener in the detergent compartment.

• To cancel the time delay, press the Power button.

ajust to "8"

select the

program

or manual

Downloaded From WashingMachine-Manual.com Manuals

Other manuals for DWD-FD1411

Table of contents

Other Daewoo Washer manuals

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide

Beko

Beko WKB 51231 PTMA manual