Da-Lite PERM WALL FRAME User manual

DA-LITE SCREEN COMPANY, INC.

3100 North Detroit Street

Post Office Box 137

Warsaw, Indiana 46581-0137

Phone: 574-267-8101

800-622-3737

Fax: 574-267-7804

Toll Free Fax: 877-325-4832

www.da-lite.com

e-mail: [email protected]

POWER

PRESENTATION PRODUCTS

The

Installation Instructions for

PERM WALL FRAME

The Perm Wall frame should be fastened to a wall. The frame is not designed for “flying” installations.

1. Assemble frame sections together by inserting plastic corner brackets to tubes and securing the corners with #12

sheet metal screws. If you have a larger jointed frame, insert steel bracket on one section of frame into other section

matching the color code. Insert 10-32 screw through tube and bracket and fasten with wing nut.

NOTE: If the viewing surface is attached to the frame before the frame is secured to the wall, the frame may bow.

2. Place bottom of frame at desired height on wall. Make sure bottom is level. Drill through aluminum tubing every 18

24" and fasten to wall with appropriate fastener (not supplied) for type of wall construction.

NOTE: Use appropriate fastener for wall construction, i.e. wood screws if wall behind frame is wood construction or

other appropriate fastener if dry wall or plaster or cement block construction.

3. Make sure that sides are at 90 degrees or right angle to bottom and fasten to wall in like manner. Next fasten top of

frame to wall in the same manner, making sure that the center is the same distance from the bottom as it is at the

sides of frame. This is most important for proper surface fit.

NOTE: If a center spreader is shipped with frame, insert center spreader between the bottom and the top of frame as

a guide. This is most important to insure that the top and bottom are equal distance apart across the entire top of

frame. Lack of care in this regard will result in poor fit of surface. Center spreader can be removed once top of frame

is fastened to the wall.

4. Carefully snap surface onto frame. This completes the installation.

PERM WALL INSTALLATION

Printed in U.S.A. 76087 Rev. 4/08

Da-Mat®, High Contrast Da-Mat®, Pearlescent, Cinema Vision, High Contrast Cinema Vision, High Contrast Cinema Perf, Audio Vision,

High Contrast Audio Vision, Da-Tex® (Rear) and Dual Vision surfaces can be cleaned as follows:

Using a white clean cloth (100% cotton preferred) that is dampened with clear water, gently wipe the area in one

direction. Do not use a circular motion. Using a dry 100% cotton cloth, wipe dry after each cleaning session. To clean a

stubborn stain or a sticky surface, use denatured alcohol (methanol or methyl alcohol) following the same procedure as

for water.

CLEANING

COLOR CODED

BANDS

TO SIMPLIFY

ASSEMBLY (FOR

LARGE SCREENS

WITH WIDTH 96"

AND OVER)

BINDING WITH

SNAP BUTTONS

PRECISELY

PLACED

STUDS FOR

SNAP

BUTTONS

WING NUT CONCEALED

BY BINDING

DETAIL VIEW OF

FRAME JOINT

CORNER PLASTIC BRACKET

ANODIZED

ALUMINUM FRAME

STEEL BRACKET

FRAME TUBING

PICTURE

SURFACE

FRAME

TUBING

#12 SHEET METAL

SCREW

DETAIL VIEW OF

FRAME CORNER

Table of contents

Other Da-Lite Projection Screen manuals

Da-Lite

Da-Lite Multi vision imager User manual

Da-Lite

Da-Lite LARGE ADVANTAGE DELUXE ELECTROL User manual

Da-Lite

Da-Lite Viewshare tensioned Advantage Electrol User manual

Da-Lite

Da-Lite ExecutiveElectrol User manual

Da-Lite

Da-Lite EXECUTIVE ELECTROL User manual

Da-Lite

Da-Lite TENSIONED ADVANTAGE ELECTROL User manual

Da-Lite

Da-Lite Boardroom ElEctrol User manual

Da-Lite

Da-Lite Da-Snap Screen User manual

Da-Lite

Da-Lite PROFESSIONAL ELECTROL User manual

Da-Lite

Da-Lite ADVANTAGE ELECTROL Assembly instructions

Da-Lite

Da-Lite Tensioned Advantage Deluxe Electrol User manual

Da-Lite

Da-Lite FullVision User manual

Da-Lite

Da-Lite UTB Contour User manual

Da-Lite

Da-Lite Wireline Advantage User manual

Da-Lite

Da-Lite Deluxe Insta-theater User manual

Da-Lite

Da-Lite TENSIONED DUAL MASKING ELECTROL User manual

Da-Lite

Da-Lite DESIGNER CONTOUR ELECTROL Series User manual

Da-Lite

Da-Lite LARGE ADVANTAGE DELUXE ELECTROL User manual

Da-Lite

Da-Lite Parallax Thin User manual

Da-Lite

Da-Lite EXECUTIVE ELECTROL User manual

Da-Lite

Da-Lite IDEA Screen User manual

Da-Lite

Da-Lite EXECUTIVE ELECTROL User manual

Da-Lite

Da-Lite ViewShare Tensioned Advantage Electrol... User manual

Da-Lite

Da-Lite STUDIO ELECTROL User manual

Popular Projection Screen manuals by other brands

FART PRODUKT

FART PRODUKT Standard SCREEN Installation instruction

Draper

Draper E Series Installation & operating instructions

Elite Screens

Elite Screens Elite Tripod Series user guide

Laarhoven

Laarhoven Companion II General assembly instructions

Renogy

Renogy RMS-LFPS-US manual

Samsung

Samsung S*H65* user manual

FONESTAR

FONESTAR PPTR-43100-FA quick start guide

Slide Clear

Slide Clear Varro XL installation instructions

Elite Screens

Elite Screens M85XWS1-SRM manual

OS РХ-090Н user manual

Niko

Niko 10-845 Product information

Speaka Professional

Speaka Professional 2357532 Important information

Sima

Sima XL-72 instruction manual

Jasic

Jasic EVO 2.0 ET-200P Fitting instructions

Elite Screens

Elite Screens Starling 2 Series user guide

InFocus

InFocus SC-WALL GRY-92H Instruction guide

Barco

Barco OverView MVL-615 Brochure & specs

Draper

Draper Envoy Installation & operating instructions