Da-Lite IDEA Screen User manual

INSTRUCTION BOOK FOR

IDEA™ Screen

Preparation

Note: It requires two people to assemble an IDEA Screen. To

maintain optimal projected image geometry and screen

alignment, a lat and straight wall free from obstructions and

angular distortions should be used.

Tools Required For Assembly

Phillips Screwdriver Level

Rubber Mallet Measuring Tape

Choose a clean work area for assembly using padded material or

other soft, clean materials. The work area should be larger than

the overall screen size and directly in front of the location where

the screen is to be installed.

Hardware Provided

(7) #8 x ½” Screws

44” Wall Bracket

(2) 89”, 94¼”, 95¼” and 106” Wide Screens

28” Wall Bracket

(2) 57½”, 64”, 73½”, 80”, 81¾” and 84¾” Wide Screens

(2) LBrackets

Assembly Instructions for Screens with 24” Marker Tray

1. Carefully unpack unit and place assembly on top of the clean

work area. The viewing surface must face up.

2. Center aluminum tray to the bottom of frame and attach with (3)

of the provided #8 x ½” screws. Insert screws through the tray into

the groove (Figure 1).

#8 X ½" Screws

Figure 1

Wall Mounting Instructions for Screens with 24” Marker Tray

NOTE: The screen is shipped with two wall brackets. Screens in

widths of 84 ¾” and below receive (2) 28” wall brackets. Screens

above 84 ¾” in width receive (2) 44” wall brackets. Use

appropriate mounting hardware for the wall type and to

accommodate for the screen’s hanging weight (Figure 2).

1. Secure the two wall brackets to wall studs at the desired height.

The outside edge of each wall bracket must be no greater than

5” away from the left and right edges of the frame. You will need

at least 1” clearance above the drilled holes to hang the screen

(Figure 2) .

2. To install the (2) L-brackets, you must measure the overall height

of the screen frame and subtract 1⅛”. Using that dimension,

measure down from the top edge of the wall brackets and mark

the wall for two screw holes. The outside edge of each L-bracket

must be no greater than 5” away from the left and right edges of

the screen frame (Figure 2).

3. Secure the two L-brackets to the wall at the marked locations. The

longest side of the two L-brackets should be pointing upwards

when secured in order to hide the L-brackets behind the screen

frame once the screen is installed.

Wall Brackets

LBracket

No More

than 5”

No More

than 5”

No More

than 5”

Figure 2

Screws (Not Supplied)

Wall Mounting Instructions for Screens with 24” Marker Tray (continued)

4. This step requires two people. Hang the screen on the wall

brackets. There is a lip on the back of the frame that wedges itself

into the wall brackets once fully installed. Ensure that the screen

clears the L-brackets and that the screen weight is on the wall

brackets, not the L-brackets.

5. Tap the bottom of the two L-brackets with the rubber mallet until

they make contact with the frame. Secure the two L-brackets to

the frame with the remaining (4) #8 x ½” screws (Figure 3).

#8 X ½" Screws

Figure 3

6. Attach bottom of screen to wall through the mounting holes

located under the tray.

Assembly Instructions for Screens with Full Length Tray

1. Carefully unpack unit and place frame assembly on top of the

clean work area. The viewing surface must face up.

2. Center the marker tray to the bottom of the frame and attach

with (7) of the provided #8 x ½” screws (Figure 4). Insert screws

through the tray into the groove.

Viewing Surface

Aluminum Tray

#8 X ½" Screws

Figure 4

Wall Mounting Instructions for Screens with Full Length Tray

NOTE: The screen is shipped with two wall brackets. Screens

in widths of 84¾” and below receive (2) 28” wall brackets.

Screens above 84¾” in width receive (2) 44” wall brackets. Use

appropriate mounting hardware for the wall type and to

accommodate for the screen’s hanging weight.

1. Secure the two wall brackets to wall studs at the desired

height. The outside edge of each wall bracket must be no

greater than 5” away from the left and right edges of the

screen frame. You will need at least 1” clearance above the

drilled holes to hang the screen.

Figure 5

Screws (Not Supplied)

Wall Brackets

2. This step requires two people. Hang the screen on the wall

brackets (Figure 5). There is a lip on the back of the frame that

wedges itself into the wall brackets once fully installed.

3. Attach bottom of screen to wall through the mounting holes

located under the tray (Figure 5).

Cleaning

The supplied cleaning cloth can be used to clean marks on the screen surface made by everyday dry erase marker usage. Use clean or

dry sections of the microiber cloth when erasing the screen. This is important to prevent smearing on the screen while cleaning. To

clean persistent marks from dry erase markers, use the supplied Da-Lite spray cleaner and cleaning cloth. Windex Original spray cleaner

can be used to remove tough to clean or smeared areas. To clean permanent markers and other unintentional marks on the surface,

use the supplied Da-Lite spray cleaner and cleaning cloth or a melamine foam cleaning pad.

No More

than 5”

No More

than 5”

LIMITED ONE YEAR WARRANTY ON DA-LITE PRESENTATION PRODUCTS

Milestone AV Technologies LLC warrants certain Da-Lite branded products to the original purchaser only, to be free from defects

in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; provided they are

properly operated according to Da-Lite’s instructions and are not damaged due to improper handling or treatment after shipment

from the factory.

This warranty does not apply to equipment showing evidence of misuse, abuse or accidental damage, or which has been tampered

with or repaired by a person other than authorized Da-Lite personnel.

Da-Lite’s sole obligation under this warranty shall be to repair or to replace (at Da-Lite’s option) the defective part of the merchandise.

Returns for service should be made to your Da-Lite dealer. If it is necessary for the dealer to return the screen or part to Da-Lite,

transportation expenses to and from Da-Lite are payable by the purchaser and Da-Lite is not responsible for damage in shipment.

To protect yourself against damage or loss in transit, insure the product and prepay all transportation expenses.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WARRANTIES AS TO FITNESS FOR USE AND MERCHANTABILITY. Any implied warranties of

itness for use, or merchantability, that may be mandated by statute or rule of law are limited to the one (1) year warranty period.

This warranty gives you speciic legal rights, and you may also have other rights, which vary from state-to-state. TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES RESULTING FROM

INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE.

In the event that there is a defect in materials or workmanship of a Da-Lite product, you may contact our Sales Partners at PO Box 137,

Warsaw, IN 465810137, (574) 2678101, (800) 6223737.

IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND DA-LITE BRANDED PRODUCTS SHALL NOT BE BOUND BY THIS

WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH THE DA-LITE WRITTEN INSTRUCTIONS.

Keep your sales receipt to prove the date of purchase and your original ownership.

28407

A Milestone AV Technologies Brand

3100 North Detroit Street

Warsaw, Indiana 46582

P: 574.267.8101 or 800.622.3737

F: 574.267.7804 or 877.325.4832

E: info@da-lite.com

www.da-lite.com

DL–0488 (Rev. 3) 02.15

Other manuals for IDEA Screen

Table of contents

Other Da-Lite Projection Screen manuals

Da-Lite

Da-Lite senIor electrol User manual

Da-Lite

Da-Lite VERSATOL User manual

Da-Lite

Da-Lite MULTI-MASK IMAGER User manual

Da-Lite

Da-Lite Tensioned Advantage Deluxe Electrol User manual

Da-Lite

Da-Lite Perm Wall Frame User manual

Da-Lite

Da-Lite ELECTROL User manual

Da-Lite

Da-Lite IDEA Screen User manual

Da-Lite

Da-Lite ADVANTAGE DELUXE ELECTROL User manual

Da-Lite

Da-Lite Viewshare tensioned Advantage Electrol User manual

Da-Lite

Da-Lite ADVANTAGE ELECTROL User manual

Da-Lite

Da-Lite 27971T User manual

Da-Lite

Da-Lite Slimline Electrol User manual

Da-Lite

Da-Lite Designer Electrol User manual

Da-Lite

Da-Lite SENIOR ELECTROL User manual

Da-Lite

Da-Lite Advantage User manual

Da-Lite

Da-Lite Cosmopolitan Electrol User manual

Da-Lite

Da-Lite ADVANTAGE DELUXE ELECTROL User manual

Da-Lite

Da-Lite DELUXE MODEL B User manual

Da-Lite

Da-Lite Designer Contour® User manual

Da-Lite

Da-Lite TENSIONED EXECUTIVE ELECTROL User manual

Da-Lite

Da-Lite Boardroom ElEctrol User manual

Da-Lite

Da-Lite Advantage Manual With CSR User manual

Da-Lite

Da-Lite Theater-Lite User manual

Da-Lite

Da-Lite IMAGER User manual

Popular Projection Screen manuals by other brands

FART PRODUKT

FART PRODUKT Standard SCREEN Installation instruction

Draper

Draper E Series Installation & operating instructions

Elite Screens

Elite Screens Elite Tripod Series user guide

Laarhoven

Laarhoven Companion II General assembly instructions

Renogy

Renogy RMS-LFPS-US manual

Samsung

Samsung S*H65* user manual

FONESTAR

FONESTAR PPTR-43100-FA quick start guide

Slide Clear

Slide Clear Varro XL installation instructions

Elite Screens

Elite Screens M85XWS1-SRM manual

OS РХ-090Н user manual

Niko

Niko 10-845 Product information

Speaka Professional

Speaka Professional 2357532 Important information

Sima

Sima XL-72 instruction manual

Jasic

Jasic EVO 2.0 ET-200P Fitting instructions

Elite Screens

Elite Screens Starling 2 Series user guide

InFocus

InFocus SC-WALL GRY-92H Instruction guide

Barco

Barco OverView MVL-615 Brochure & specs

Draper

Draper Envoy Installation & operating instructions