D-Link MyDlink DCS-8515LH User manual

1

Plug the included USB power adapter into the power port on the

bottom of the camera, making sure to route the cable appropriately.

2

Once the camera has powered up, it will rotate left and right , up and

down to calibrate itself. Wait until the LED at the front changes from

red to blinking orange.

3

To download and install the mydlink app on your mobile device,

scan the QR code above for your Android or iOS device.

Note: This product is NOT COMPATIBLE with

mydlink Lite or mydlink+ apps.

If you are an existing mydlink Lite user, sign in to the

new app with the same username and password and

your existing cameras will appear in the new app.

4

Existing Users:

Sign in using your mydlink account and tap the icon at the

top-left, then tap Add a Device to start the setup wizard.

Continue to follow the onscreen instructions.

OR

New Users:

Tap Sign Up to register for a mydlink account, then tap

Add a Device to install your camera. Continue to follow the

onscreen inscructions.

5

When prompted, select "Yes" to scan the QR code on the bottom

of the camera, then continue to follow the onscreen instructions to

complete the setup process.

DCS-8515LH

Product name: Full HD Outdoor Wi-Fi Camera

P/N:BCS8515LHLNANA1

S/N:QXN71YMXXXXXX

MAC ID:XXXXXXXXXXXX

mydlink No.:XXXXXXXX

Endpoint:

DCS-8515LH-XXXX

PIN Code:XXXXXX

H/W Ver.:A1

F/W Ver.:XXXX

6

Where a microSD card can be inserted in order to save video recordings.

Note: Please use the mydlink app to tilt the camera up to reveal the slot.

Minimum Requirements

To install this product, you will need:

• An 802.11 g/n wireless router

• An Internet connection

• The latest version of the mydlink app from the App Store or Google Play.

Please refer to the app's store page to check whether your device is

compatible.

• An e-mail account (required to register for mydlink service)

Camera Mounting Instructions

Step 1:

Place the mount at the desired location, assuring

that location of the power cord thread is also at the

desired location. Use a pencil to mark the holes.

Step 2:

Using a 6 mm drill bit, drill two 25 mm deep holes

over the pencil marks. For a plaster, drywall, or

concrete wall, insert the plastic anchors to support

the screws rst.

Step 4:

Align the bottom of the camera to the threads on the

mount. Assure that the camera is securely snapped

into place.

Step 3:

Place the mount over the holes that are in the wall.

Make sure to align the mount holes with the holes

in the wall. Use the supplied screws to attach the

mount to the surface of the wall.

1

2

3

4

Camera LED Information

DCS-8515LH

Status LED

System booting / Factory resetting

Data is being transferred

Bluetooth enabled

Wireless connected

Firmware updating

BLE pairing / Ready for setup

Other manuals for MyDlink DCS-8515LH

3

Table of contents

Other D-Link Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications