D-Link DCS-930L Manual

Other manuals for DCS-930L

14

This manual suits for next models

1

Other D-Link Security Camera manuals

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications

Technical Support Setup Procedure

Setup Wizard - Setting Up DCS-930L & DCS-932L WITH mydlink Account

Step 1: Run the CD Set-Up that came with the DCS-930L/DCS-932L. Click Autorun to run mydlink

Set-Up Wizard. On the mydlink Set-Up Wizard screen, click Start button.

Step 2: Select the radio button “No, my router does not have WPS Support”. Click Next button.

Step 3: Tighten the collar on the camera base after moving the camera to the position you want. Click

Next button.

Step 4: Connect the included Ethernet cable to the port on the DCS-930L/DCS-932L camera. Connect

the other end of the cable to an available LAN port on your router. Click Next button.

Step 5: Attach the power adapter to the power jack on the back of the DCS-930L/DCS-932L camera,

and connect the power adapter to a power outlet. Ensure that the Status LED on the front of the

camera is solid green after 30 seconds. Click Next button.

Step 6: A pop up message will appear. Please check if the LED on the front of the camera lit is solid

green. Click Yes button if it is solid green.

Step 7: Please wait while the Wizard is detecting the camera on your network.

Step 8: You will now see the camera device information with its corresponding IP Settings and MAC

Address. Click Next button.

Step 9: Please enter a password to secure you camera. Click Next button when done.

Step 10: If you want to setup your camera wirelessly make sure that your router supports wireless. If

so, select the radio button “I want to connect my camera wirelessly”. On the Available Wireless

Network, select the name of your wireless network and click Next button.

If you want to connect your camera via a network cable, please select “Wired –I want to connect

my camera through a cable (wired connection). Click Next button.

Step 11: For wireless setup, enter the wireless encryption used on your wireless network and click

Next button.

Step 12: Please unplug the Ethernet cable from the back of your camera, then click Continue button.

Please wait while the camera is restarting.

Step 13: Select the radio button “Yes, I already have a mydlink account” if your already

registered before or select the radio button on No, I need to sign up for a new account if you did

not register in mydlink yet. Click Next button.

Step 14: Set-up is Complete. Click Finish button.

Step 15: You are now ready to access the camera using the mydlink account. Open your web browser

and type http://www.mydlink.com” on the address bar. Press the enter key on your keyboard.

Step 16: Click on Sign In to mydlink.

Step 17: Enter the E-Mail Address and the Password used to register on mydlink and then click on the

Sign In button.

Step 18: The image of the camera will now show up on your mydlink account.

Note: You may repeat the same procedure to add more mydlink ip cameras to your mydlink

account.