D-Link DCS-7413 User manual

This document will guide you through

the basic installation process for your new

D-Link Network Camera.

DCS-7413

Quick Install Guide

Full HD Day & Night Outdoor Network Camera

D-Link DCS-7413 Quick Install Guide

ENGLISH

This installation guide provides basic instructions for installing the DCS-7413

Network Camera on your network. For additional information about how to

use the camera, please see the User Manual which is available on the CD

included in this package or from the D-Link website.

Package Contents

• DCS-7413 Network Camera

• Mounting Bracket and Screws

• CAT5 Ethernet Cable

• Power Adapter

• AV and Power Cables

• Extension Adapter

• Quick Install Guide

• User Manual and Software on CD-ROM

If any of the above items are missing, please contact your reseller.

Safety Notice:

Installation and servicing should be done by certied technicians so as to

conform to all local codes and prevent voiding your warranty.

Installation

D-Link DCS-7413 Quick Install Guide

ENGLISH

Hardware Overview

1Ethernet Jack Connect to a router or switch. Also used to power the camera

using Power over Ethernet (PoE).

2Power Connector Connects to a 12V DC power adapter.

3Audio Out Connect to external speakers.

4Audio In Connect to a microphone.

5DI/DO Connector DI/DO connector provide a physical interface to send and receive

digital signals to and from a variety of external devices.

624V Power Connector Connect to a 24V AC power source.

7Reset Button Press and hold to reset the camera to the factory default settings.

8BNC Connector

(video out) Connect to an analog video input.

D-Link DCS-7413 Quick Install Guide

ENGLISH

Insert your SD card into the camera with

the gold contacts oriented towards the

base of the camera. To eject the SD card,

push the SD card into the slot.

SD Card Installation

Loosen the two screws and lift o the

adjustable sun shield.

Remove the base of the camera by holding

the camera rmly and rotating the base in

a counter-clockwise direction.

Replace the base of the camera by holding

the camera rmly and rotating the base in a

clockwise direction ensuring a tight t.

Note: Ensure that the weatherproof seals are

secured rmly in place. Attach the sun shield

and tighten the two screws.

Note: If you fully extend the top shield, it may be visible in the camera view in the top left and right corners

of your video. It is recommended that you always check your camera’s video whenever you reposition the

camera or adjust the weather shield to ensure that your camera has the best possible view.

D-Link DCS-7413 Quick Install Guide 5

ENGLISH

Please refer to the User Manual (Section 2 - Assembly and Installation) for detailed instructions

regarding mounting of the camera using a mounting bracket.

Note: To prevent the camera’s wire connectors from being damaged by water or other

elements:

1. When connecting the camera, the unsheathed part of the wire connectors must either be

sealed or enclosed in a junction box.

2. The unsheathed part of the wire connectors should be positioned at a downward-facing

angle when they extend out of the rear of the camera, not upward.

The unsheathed part of the wire connectors must either be sealed or enclosed in a junction box.

Mounting the Camera

D-Link DCS-7413 Quick Install Guide

ENGLISH

Connection with a PoE Switch

If you are using a PoE switch, connect the IP camera to the switch via an Ethernet cable, which

will provide transmission of both power and data over a single cable.

General Connection Using 24V AC Power Wiring

1. Connect the network camera to a switch via an Ethernet cable.

2. Connect the supplied power cable from the camera to a power source such as your

building's emergency power.

General Connection Using 12V DC Power Adapter

1. Connect the network camera to a switch via an Ethernet cable.

2. Connect the supplied power cable from the camera to a power outlet.

D-Link DCS-7413 Quick Install Guide 7

ENGLISH

Conguration with Wizard

Click Setup Wizard to begin the installation.

Insert the DCS-7413 CD into your computer's CD-ROM drive to begin the installation. If the Autorun

function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click

Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.

After clicking Setup Wizard, the following window will open.

Click Next to continue.

Click Yes to accept the License Agreement.

Click Finish to complete the installation.

To start the installation process, click Next.

Note: The installation may take several minutes to nish.

D-Link DCS-7413 Quick Install Guide

ENGLISH

Click on the D-Link Setup Wizard SE icon that was created

in your Windows Start menu.

Start > D-Link > Setup Wizard SE

Take a moment to conrm your settings and click Restart.

Select DHCP if your camera obtains an IP address automatically

when it boots up. Select Static IP if the camera will use the

same IP address each time it is started.

Click Next to continue.

Enter the Admin ID and password. When logging in for the

rst time, the default Admin ID is admin with the password

left blank.

Click Next to continue.

The Setup Wizard will appear and display the MAC address

and IP address of your camera(s). If you have a DHCP server

on your network, a valid IP Address will be displayed. If your

network does not use a DHCP server, the network camera's

default static IP 192.168.0.20 will be displayed.

Click the Wizard button to continue.

D-Link DCS-7413 Quick Install Guide 9

ENGLISH

Click on the D-Link Setup Wizard SE icon that was

created in your Windows Start menu.

Start > D-Link > Setup Wizard SE

Viewing Camera via Web Browser

This section shows your camera’s live video. You can select your

video prole and view or operate the camera. For additional

information about web conguration, please refer to the user

manual included on the CD-ROM or the D-Link website.

Enter admin as the default username and leave the

password blank. Click OK to continue.

Select the camera and click the button labeled "Link" to

access the web conguration.

The Setup Wizard will automatically open your web browser

to the IP address of the camera.

D-Link DCS-7413 Quick Install Guide

ENGLISH

Notes

Other manuals for DCS-7413

Table of contents

Other D-Link Security Camera manuals

D-Link

D-Link DCS-7010L User manual

D-Link

D-Link DCS-3716 User manual

D-Link

D-Link SecuriCam DCS-6510 User manual

D-Link

D-Link SECURICAM Network DCS-5300G User manual

D-Link

D-Link DCS-3110 - SECURICAM Fixed Network Camera User manual

D-Link

D-Link DCS-2136L User manual

D-Link

D-Link DCS-7010L User manual

D-Link

D-Link DCS-3112 User manual

D-Link

D-Link DCS-3410 User manual

D-Link

D-Link DCS-1100 User manual

D-Link

D-Link DCS-5020L User manual

D-Link

D-Link DCS-8000LHV2 User manual

D-Link

D-Link DCS-2310L User manual

D-Link

D-Link DCS-4622 User manual

D-Link

D-Link DCS-931L Cloud Camera 1050 User manual

D-Link

D-Link DCS-8302LH User manual

D-Link

D-Link DCS-8000LH User manual

D-Link

D-Link DCS-3410 User manual

D-Link

D-Link SECURICAM DCS-5605 User manual

D-Link

D-Link DCS-6115 User manual

D-Link

D-Link DSH-C310 User manual

D-Link

D-Link DCS-2630L User manual

D-Link

D-Link DCS-6616 User manual

D-Link

D-Link DCS-2310L User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications