D-Link DSL-2877AL Manual

How to setup the DSL-2877AL modem router

for Internode VDSL connection

This document details how to setup your modem/router for Internode VDSL

D-Link Technical Support –How to setup DSL-2877AL for Internode VDSL connection Page 2of 6

Step 1. Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP

address of your D-Link modem in the address bar: http://192.168.1.1.

When prompted type in the Username and Password, enter the validation code displayed on your page and

then click on the “Log In” button.

If you have not changed the password for the modem administration, the factory settings are:

Username: admin

Password: admin

If you cannot recall the password you have assigned to your modem, you will need to reset the modem to factory

defaults by pressing the reset button for 10 seconds. Please note that this will revert all the settings in the modem to

factory settings and you will have to reconfigure it with your Internet settings and Wireless security. Make sure you

have your Internet account details (given by your Internet Provider) handy.

D-Link Technical Support –How to setup DSL-2877AL for Internode VDSL connection Page 3of 6

Step 2. After logging in, click on “Setup” and go through the Setup Wizard.

Click on the “Next” button and follow the Setup Wizard.

Step 3. Set a new Password for your modem’s configuration pages.

D-Link Technical Support –How to setup DSL-2877AL for Internode VDSL connection Page 4of 6

Step 4. Set your Time Zone.

Step 5. Set your Internet connection type.

For Internet Connection Type select VDSL

Set Country to Australia

Internet Service Provider: Others

802.1q: set to Deactivated

Protocol: select PPPoE

MTU: 1492

D-Link Technical Support –How to setup DSL-2877AL for Internode VDSL connection Page 5of 6

Enter the Username and Password for your Internode account.

Step 6. Set up your Wireless Network –type in the Wi-Fi network names you want to use.

Select your wireless security: “Best”is the recommended option.

D-Link Technical Support –How to setup DSL-2877AL for Internode VDSL connection Page 6of 6

Enter the security password that you want to use for your Wi-Fi.

After clicking on “Next” please wait while the modem router applies the new settings.

Step 7. Setup Mydlink Cloud services (optional). Click on “Next”to register or login onto Mydlink Cloud or

click “Connect”to bypass the Mydlink setup.

After that your modem router setup is complete.

Other manuals for DSL-2877AL

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview