D-Link DI-604UP User manual

1. If you purchased this router to share your high-speed Internet connection with

other computers, you must have either an Ethernet-based Cable or a DSL modem

with an established Internet account from an Internet Service Provider (ISP).

2. It’s best to use the same computer that is connected to your modem for

configuring the DI-604UP router. The DI-604UP Broadband Router acts as a

DHCP server and will assign all the necessary IP address information on your

network. See Appendix at the end of this Quick Installation Guide or the

Manual on the CD-ROM for setting each network adapter to automatically

obtain an IP address.

Check Your Package Contents

These are the items included with your DI-604UP purchase:

If any of the above items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice.

This product can be set up using any

current web browser, i.e., Internet Explorer

6x, Netscape Navigator 7x.

• DI-604UP Broadband Router

• CD-ROM

• Ethernet (CAT5 UTP/Straight-Through) Cable

• 5V DC, 2 A Power Adapter

Using a power

supply with a

different voltage rating

will damage and void

the warranty for this

product.

Before You Begin

DI-604UP

Wired Router

with USB Printer Port

Connecting The DI-604UP Broadband

Router To Your Network

A. First, connect the power adapter to the receptor at the back panel of the DI-

604UP and then plug the other end of the power adapter to a wall outlet or power

strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of an Ethernet cable to the WAN port on the back panel of the

DI-604UP and the other end to the Ethernet port located on your Cable or DSL

modem. The WAN LED light will illuminate to indicate proper connection.

C. Insert one end of an Ethernet cable to LAN port 1 on the back panel of the DI-

604UP and the other end to an available Ethernet port on the network adapter in

the computer you will use to configure the DI-604UP. The LED light for LAN Port 1

will illuminate to indicate proper connection. (Note: Some computers already have

network adapters pre-installed.)

Restart Your Computer

B. WAN Port

This is the

connection for the

Ethernet Cable to

Ethernet Port on the

Cable or DSL

Modem.

Reset Button

Pressing this button

restores the router to its

original factory default

settings.

C.LAN Ports

These are the

connections for

Ethernet cables to

your Ethernet-

enabled com

uters

USB Port

This is connection for

your USB printer.

.Receptor for

Power Ada

ter

Connecting Additional Devices to the

DI-604UP Broadband Router

Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect your

Ethernet-equipped computer(s) to one of the 3 remaining Ethernet LAN ports on

the back panel of the DI-604UP.

Additional printer may be added to your DI-604UP to increase functionality. By

connecting a printer to the USB port at the back of the router, you may share print

capabilities over your wired network. A valid USB connection will cause the

corresponding USB LED at the front to light. For more information regarding USB

connections and device implementation, see the DI-604UP user guide.

LAN Port LEDs.

Each of the LAN ports on the back

of the DI-604UP have a

corresponding LED light on the front

panel of the unit. When a proper

connection has been made to a

computer that is ON, the LED on the

front panel should illuminate.

USB Port LED.

The USB port on the back of the

DI-604UP has a corresponding LED

light on the front panel of the unit.

When a proper connection has been

made to a device that is ON, the LED

on the front panel should illuminate.

When you have completed the steps in this Quick Installation Guide, your

connected network should look similar to this:

Cable or DSL

Modem

connected to

the WAN port.

DI-604UP

Broadband Router

Computers

connected

to the LAN

Ports

Printer

connected

to the USB

port.

Using The Setup Wizard

The logon pop-up screen will appear.

Once you have logged in, the Home screen will appear.

Open your Web

browser and type

“http://192.168.0.1” into

the URL address box.

Then press the Enter or

Return key.

Click OK

Type “admin” for

the username and

leave the password

field blank.

You will see the following screens.

Step 1 - Set up your new password.You have the option to establish a password.

Step 2 - Choose your time zone.

Click Run Wizard

Click Next

The Setup Wizard (continued)

Select the type of Internet connection for your router.

If you selected Dynamic IP Address, this screen will appear:

Click Next

If you are unsure of which setting to

select, please contact your Internet

Service Provider.

Select one of

these settings

If your ISP requires a Static IP Address, and this option is selected, then this screen

will appear:

If your ISP uses PPPoE (Point-to-Point Protocol over Ethernet) and this option is

selected, then this screen will appear:

What is a MAC address? Each

network adapter has a discrete

Media Access Control (MAC)

address. Note that some computers

and peripherals may already include

built-in network adapters.

Click Next

Enter the IP address

information originally

provided to you by your

ISP. You will need to

complete all the required

fields.

“Clone MAC Address”

button to automatically

copy the MAC address

of the network adapter in

your computer. You can

also manually type in the

MAC address.

Click Next

Please be sure to remove any

existing PPPoE client software

installed on your computers.

Enter in the username

and password provided

to you by your ISP and

retype that same

password to verify it.

If your ISP uses PPTP and this option is selected, then this screen will appear.

If your ISP uses L2PT and this option is selected, then this screen will appear.

Enter the IP address

information originally

provided to you by your

ISP.

Click Next

Enter the IP address

information originally

provided to you by your

ISP.

Click Next

This manual suits for next models

Table of contents

Other D-Link Network Router manuals

D-Link

D-Link DSL-502T User manual

D-Link

D-Link DI-804V User manual

D-Link

D-Link DIR-821 User manual

D-Link

D-Link DI-808HV User manual

D-Link

D-Link DSL-3890 User manual

D-Link

D-Link IR850LA1 User manual

D-Link

D-Link DIR-615 - Wireless N Router User manual

D-Link

D-Link DI-704GU User manual

D-Link

D-Link DES-1005D User manual

D-Link

D-Link DIR-602L User manual

D-Link

D-Link DES-3026 User manual

D-Link

D-Link R12 User manual

D-Link

D-Link DSL-2750U User manual

D-Link

D-Link Amplifi DIR-657 User manual

D-Link

D-Link DIR-636L User manual

D-Link

D-Link DGS-3700-12 User manual

D-Link

D-Link DIR-655 - Xtreme N Gigabit Router Wireless User manual

D-Link

D-Link DIR-862L User manual

D-Link

D-Link DIR-827 User manual

D-Link

D-Link AirPlus DWL-810+ User manual

D-Link

D-Link DSL-2650U User manual

D-Link

D-Link DSL-2740M User manual

D-Link

D-Link Xtreme N DUO User manual

D-Link

D-Link DSL-2740B User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview