D-Link AirPlus DWL-G730AP User manual
D-Link AirPlus G Wireless Pocket Router/AP
Quick Installation Guide+
Руководство по быстрой установке+
Guía de Instalación Rápida+
Guia de Instalação Rápida+
快速安裝指南+
Petunjuk Pemasangan Cepat+
DWL-G730AP
This product can be set up using any
current web browser, i.e., Internet
Explorer 6 or Netscape Navigator 6.2.3.
5V 1.2A DC Power Adapter
Before You Begin
Check Your Package Contents
DWL-G730AP Wireless Pocket Router/AP
CD-ROM with Manual
Ethernet (CAT5 UTP) Cable
If any of the above items are missing, please contact your reseller.
Using a power supply
with a different voltage
ratingwilldamageandvoid
the warranty of this product.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specications subject to change without notice. DWL-G730AP.08162004
D-Link Travel Case
The default IP address for the DWL-G730AP is 192.168.0.30 with a Subnet Mask of
255.255.255.0. You will need to assign your computer a Static IP address within the same
range as the DWL-G730AP’s IP address for the purpose of conguring the DWL-G730AP.
USB Power Cable
DWL-G730AP
D-Link AirPlus™G
Wireless Pocket
Router/AP
3
Hardware Overview
Mode Selection Switch:
Used to select AP, client,
or router mode.
LAN Port
This is the connection for Ethernet cables to
your Ethernet-enabled device. When in Router
mode, this port functions as a WAN port.
Receptor for
Power Adapter
Power LED: Solid
indicates a connection to
a good power source.
Top Panel
Bottom Panel
Rear Panel
LAN LED: Solid indicates an
Ethernet connection. Blinking
indicates activity on the
Ethernet network.
WLAN LED: A solid light
indicates that the wireless
segment is ready. This LED
blinks during wireless data
transmission.
Reset Button:
Used to restore
default settings.
4
Installation Overview
The DWL-G730AP offers three different operation modes:
AP (Access Point Mode): In this mode, the DWL-G730AP functions as an access point.
Client (Client Mode): When Client mode is selected, the DWL-G730AP as a wireless
client.
RT (Router Mode): The DWL-G730AP functions as a router when this mode is selected.
AP - Access Point Mode
When the Mode Selection Switch on the bottom of the DWL-G730AP is set to AP,
the unit is in Access Point Mode. The diagram below illustrates a typical access
point conguration.
Note: D-Link® AirPlus G wireless devices are pre-congured to connect together,
right out of the box, using their default settings.
5
Installation Overview (continued)
Client - Client Mode
When the Mode Selection Switch on the bottom of the DWL-G730AP is set to
Client, the unit is in Client Mode. The diagram below illustrates a typical client
conguration.
Note: D-Link® AirPlus G wireless devices are pre-congured to connect together,
right out of the box, using their default settings.
6
Installation Overview (continued)
RT - Router Mode
When the Mode Selection Switch on the bottom of the DWL-G730AP is set to
RT, the unit is in Router Mode. The diagram below illustrates a typical router
conguration.
Note: D-Link® AirPlus G wireless devices are pre-congured to connect together,
right out of the box, using their default settings.
7
AP Mode - Using the Setup Wizard
Once you have logged in, the
Home screen will appear.
Click Run Wizard
The logon pop-up screen
will appear.
Type admin for the
username and leave the
password eld blank.
Click OK
To congure the DWL-G730AP in AP Mode, you will need to connect a PC directly to
the DWL-G730AP using a standard Ethernet cable. You will need to assign the network
adapter connecting to the DWL-G730AP an IP address in the range of 192.168.0.x.
O p e n y o u r W e b
browser and type
http://192.168.0.30
into the URL address
box. Then press the
Enter or Return key.
8
Click Next
Set up your new password.
You have the option to
establish a password.
Set Your Wireless LAN
Connection.
By default the DWL-G730AP
SSID is set to ‘default’ with a
Channel setting of ‘6’.
Click Next
AP Mode - Using The Setup Wizard
(continued)
You will see the following screens.
Click Next
9
Encryption
The DWL-G730AP is capable of
two levels of wireless encryption
64-bit and 128-bit. By default
encryption is disabled. You
can change the encryption
settings for more secure wireless
communication.
Click Next
Click Restart
AP Mode - Using The Setup Wizard
(continued)
Click Close
The AP Setup Wizard is complete! You will be returned to the Home tab. Please close
all web browser windows.
10
Client Mode - Using the Setup Wizard
Once you have logged in, the
Home screen will appear.
Click Run Wizard
Open your Web
browser and type
http://192.168.0.30
into the URL address
box. Then press the
Enter or Return key.
The logon pop-up screen
will appear.
Type admin for the
username and leave the
password eld blank.
Click OK
To congure the DWL-G730AP in Client Mode, you will need to connect a PC directly to
the DWL-G730AP using a standard Ethernet cable. You will need to assign the network
adapter connecting to the DWL-G730AP an IP address in the range of 192.168.0.x.
Other manuals for AirPlus DWL-G730AP
2
Table of contents
Languages:
Other D-Link Network Router manuals
D-Link
D-Link DSL-3782 User manual
D-Link
D-Link DI-804HV - Express ENwork Router User manual
D-Link
D-Link DIR-505 User manual
D-Link
D-Link DSL-2544N User manual
D-Link
D-Link DSL-2640R User manual
D-Link
D-Link DWR-932C User manual
D-Link
D-Link DIR-615 - Wireless N Router User manual
D-Link
D-Link xStack DES-6500 User manual
D-Link
D-Link DIR-879 User manual
D-Link
D-Link EXO AX DIR-X1870 User manual
D-Link
D-Link DI-308 User manual
D-Link
D-Link SharePort DIR-825 User manual
D-Link
D-Link DES-3550 User manual
D-Link
D-Link DSL-2751 User manual
D-Link
D-Link DVG-5402SP User manual
D-Link
D-Link 504T User manual
D-Link
D-Link Express Ethernetwork DI-707P User manual
D-Link
D-Link WRM921 User manual
D-Link
D-Link DKT-710 User manual
D-Link
D-Link NetDefend DFL-1600 User manual
