D-Link DSL-G2562DG User manual

DSL-G2562DG ADSL/VDSL Wizard Setup Guide

1) Type in the IP address bar 10.0.0.2 into your web-browser (IE, Chrome, Firefox etc)

2) Make sure your router is connected as per the Quick Installation Guide (QIG) for DSL service.

Select Interface Type: ADSL/VDSL

Click on [Test] to confirm your connection

Click on [Next] to proceed

3) Click on [Test] to confirm your default PPP account

Click on [Next] to proceed

Note: If the test fails, please contact Telkom Support for port recreation/verification

4) For new DSL line installation, make sure the correct option is ticked and click the URL to proceed

This will take you to the Telkom Webpage for DSL verification

5) Continue as instructed on the Telkom Webpage

If you have not received your PPPoE details,

proceed with [Configure your modem with your Telkom Internet account]

If you have your PPPoE details sent to you via SMS, proceed with http://10.0.0.2

Click on [Next] to proceed to Step 4

6) Enter your PPPoE account details received from Telkom via SMS

Click on [Next] to proceed

Note: Your PPPoE details should have been sent to you in an SMS and should end with @telkomsa.net

If you do not have these details please contact Telkom support to retrieve your details

7) Click on [Test] to test account.

Click on [Next] to proceed

Note: If the test fails, please make sure the correct details were entered on step 4

Alternatively, contact Telkom Support for a password reset

8) D-Link modem comes set with unique default WIFI password on both the 2.4 & 5 GHz band for security purposes. The

default password can be located on the back of the router. You can change the default password for both bands below

(minimum of 8 characters) or [skip] to leave as default. Click on [Next] to proceed.

Note: Write down the passwords somewhere safe as you will need them to connect to your Wi-Fi

9) For security purposes, it is strongly advised that you change our default modem login password during the first setup.

Default AdminName: admin / AdminPassword: admin

Fill in new username & password for logging into your router

Click on [Next] to proceed

10) If you are subscribed to Telkom VPN Lite’s services, entered the details provided.

If not, click on [Skip] to proceed

11) Here you will be able to see a summary of the wizard setup. Click on [Apply] to complete the setup.

You will be taken back to modem login page. You can login to the modem with the details set on step 9 above.

Table of contents

Other D-Link Network Router manuals

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview