D-Link DSL-604T User manual
quickstart
guide
Before you start, please check you
have the following items ready
DSL-604T
Wireless broadband modem
DSL-604
wireless modem power
adapter ethernet
cable phone
cable line
filter D-Link
installation guide
3
line filter
Connect one end of the supplied
phone cable into the modem ADSL
port and the other end into the
ADSL port on the line filter
connect the
DSL port
4
phone socket
connect the
You can connect a phone if required to the
phone port of the line flter and then plug
the line filter into your phone wall socket
he ADSL LED on the front will flicker for several
seconds and then light up steadily.
All phones in use will require a line filter
Connecting the
cables
1
power
Screw in the modem antenna and plug in the
router to the mains power with the supplied
power adapter.
connect the
he POWER LED on the front
of the modem lights up
2
Ethernet port
Connect the blue ethernet cable in to one of
the 4 Ethernet ports on the modem and the
other end into your computers Ethernet port.
connect the
Power port
Power LED
Ethernet ports
DSL port
Phone wall socket
Power LED
DSL LED
ntenna
Connect to 10.1.1.1
The server 10.1.1.1 at DSL - 604T Admin requires a
username and password.
Warning: This sever is requesting that our username
and password be sent in an insecure (basic authentication
without a secure connection).
Username
Password
Remember m password
OK Cancel
admin
x
Enter the username admin
Enter the password admin
HelpStatus
Home Advanced Tools
Run Wizard
Wizard
WAN
LAN
DHCP
DNS
DSL 604T
ADSL Wireless Modem
Press Run Wizard to start
5
is now done!
The hardware setup
Youre now ready to configure the modem
settings Complete the following steps
(a-h) starting below:
b
Connect to settings
a
Enter the username admin
and the password admin.
( his password is for access to the modem
configuration process and can be changed
at a later stage of this set up process
to your own preference)
c
Configuring the
modem
Open your web browser
http://10.1.1.1
and type in the address
e.g. Internet Explorer
continue
Next
on the following screen listing
the configuration stages,
press:
d
Set Password
Choose a new password and then
press Next to continue
(GMT+12:00) Wellington, Auckland
Choose time zone
Choose Wellington, Auckland and
then press Next to continue
( his password is for access to this set up
process if any further changes are required
so write it down and keep in a safe place
- this is not your ihug internet password)
Set PPPoE/PPPo
Username:
your ihug [email protected]
Password:
your ihug password
type in your details then
press Next to continue
Click restart to save your settings. Your modem
will then shutdown and restart automatically.
Youre now ready to surf the internet!
e
f
g
h
Connection Type PPPoA VC MUX
Username
Password
Enter your ihug password
Select PPPo VC-MUX
Enter your ihug username
( hese details were provided to you
when you signed up to ihug)
New Password
Next
Verify Password
Next
Set up complete
Your modem is now set up to connect to the internet with ihug.
To set up your wireless connections, please refer to the supplied
D-Link instruction manual
Other D-Link Modem manuals
D-Link
D-Link DSL-320B User manual
D-Link
D-Link DSL-2320B - 24 Mbps DSL Modem User manual
D-Link
D-Link DSL-321B User manual
D-Link
D-Link DCM-604 Series User manual
D-Link
D-Link DCM-301 User manual
D-Link
D-Link TALK BOX Series User manual
D-Link
D-Link P.DG A4001N A-000-1A1-AE User manual
D-Link
D-Link DWM-311 User manual
D-Link
D-Link DCM-301 User manual
D-Link
D-Link Machine Connect 2.0 DWM-311 User manual
D-Link
D-Link DSL-2890AL User manual
D-Link
D-Link DVA-2800 User manual
D-Link
D-Link DWA-182 User manual
D-Link
D-Link WA182D1 User manual
D-Link
D-Link DSL-2740B User manual
D-Link
D-Link DCM-200 User manual
D-Link
D-Link DSL-4320L User manual
D-Link
D-Link DSL-100D User manual
D-Link
D-Link DCM-712 User manual
D-Link
D-Link DSL-300G User manual
