D-Link DCM-100 User manual

1

Before you start

Local Cable Service

Please contact your Cable Internet provider to find out the

procedure to register the modem with their network.

The Cable Internet provider will need the following modem information:

 Modem Make and Model i.e., D-Link DCM-100

 Modem Serial Number i.e., HQT10C000180 (normally found on the label at

the bottom of the unit.

 Modem MAC Address i.e., 0050BA2F0804 (on the back of the modem)

Connecting The Cable Modem

Connect the external power adapter into

the connector labeled “POWER” and the

other end to the electrical outlet.

*NOTE: Use only the AC power

adapter supplied with the DCM-100

Cable Modem.

2

Connecting The Cable Modem Continued…

Connect the coaxial cable provided for the Internet connection to the jack

labeled “CABLE IN” in the back of the cable modem unit.

Wait 1 to 3 minutes for the link light to

illuminate. If the link light does not glow,

please contact your broadband cable

company for further instructions.

Connect an Ethernet cable to the port

labeled “Ethernet” on the back of the cable

modem.

The final cable modem setup will look like the figures below:

Ethernet Cable Connection

*Note: Make sure the LINK light is on in

front of the modem after you connect the

Ethernet Cable to your computer.

3

Verifying The Modem Status Lights

Link

Light

Activity

Light

Status

Indicator

Power

Indicator

Verify the Cable Modem connections using the LED indicators

 Power: The Power LED will be “ON” after the modem has been

plugged into an AC power source.

 Link: The Link LED will be “ON” when the connection from the

cable modem to the local network is established. It means that

computers on the local network have access through the cable modem.

 Act (Activity): This LED indicates that there is “data traffic” activity.

It means that data packets are being passed through the cable modem.

 Status: The Status LED will be “ON” solid when the cable modem is

properly connected to the cable network (ISP). * If your status light

continues to blink, please contact your cable operator for further

instructions.

4

Test your Internet Connection

Open the web browser to your favorite site.

* Your cable service provider will provide the proper instructions to configure

the cable software to use their Homepage and services.

DIGITAL HOME SOLUTIONS

Version 2.2

Other manuals for DCM-100

1

Table of contents

Other D-Link Modem manuals

Popular Modem manuals by other brands

Davicom

Davicom DM562AP Operation manual

EpiValley

EpiValley TATA indicom SXC-1080 user guide

Zte

Zte WiMAX user manual

Intelimax

Intelimax MA-2060 user manual

SMC Networks

SMC Networks D3CM1604V Administrator's manual

Telstra

Telstra Wi-Fi 4G Advanced Pro X user guide

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 user manual

Samsung

Samsung AceLink SAM-335A user guide

Enfora

Enfora Enabler-G Integration guide

iRZ

iRZ ATM2-232 user guide

Zhone

Zhone 6310 installation instructions

Paradyne

Paradyne Hotwire 7976 installation instructions

US Robotics

US Robotics 3453C datasheet

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... user manual

Zte

Zte MF823 user guide

Four-Faith

Four-Faith F1403 user manual

Sierra Wireless

Sierra Wireless AIRLINK MP595W user guide

Gemtek

Gemtek WiMAX WIXFBR-103 user manual