CYP PU-8H8HBTE-4K User manual
PU-8H8HBTE-4K
8 x 8 HDMI HDBaseT™ Matrix (5-Play™ including
LAN serving & 4K resolution support)
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 01/10/2014 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................7
4. System Requirements ...........................7
5. Features..................................................8
6. Operation Controls and Functions .......9
6.1 Front Panel................................................... 9
6.2 Rear Panel...................................................10
6.3 Side Panel ...................................................11
6.4 Remote Control........................................12
6.5 IR Cable Pin Assignment .......................12
6.6 RS-232 Pin Assignment..........................13
6.7 RS-232 & Telnet Commands.................14
6.8 RS-232 UART Command Illustration
Diagram .............................................................16
6.9 Telnet Control............................................18
6.10 Web GUI Control....................................20
7. Connection Diagram .......................... 22
8. Specications...................................... 24
8.1 Technical Specication ..........................24
8.2 CAT5e/6/7 Cable Specication ...........25
8.3 Support Resolutions Chart...................25
9. Acronyms............................................. 26
6
1. INTRODUCTION
The 4K2K 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission
of video (resolutions up to 4K2K Full HD), multi-channel digital audio from
8 HDMI sources to 8 outputs over a single CAT5e/6/7 cable (up to 100m)
for each output. It supports high resolution digital audio formats such as
LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
as well as 3D content that can be displayed when connecting a 3D TV and
3D source.
This matrix features control via manual selection buttons, IR, RS-232,
Telnet or Web GUI. CYP provide control drivers for all the major control
systems. This unit also supports RS232 pass-through and CEC control
function of both sources and screens using Telnet, Web GUI or RS232.
The PU-8H8HBTE-4K is designed to be used with any of the HDBaseT
receivers that can utilise the PoE capabilities of the matrix.
The LAN serving capabilities of the matrix provide network connections
in every zone.
2. APPLICATIONS
HDMI Matrix System
Video/TV wall display and control
Commercial advertising, display and control
University lecture hall, display and control
Retail sales and demonstration
7
3. PACKAGE CONTENTS
4K2K 8×8 HDMI Matrix over CAT5e/6/7
9×IR Extender
9×IR Blaster
2×24V/6.25A DC Power Adaptor (1 for PoC)
2×Power Cord
1×IR Remote Control with battery
1×Left and Right Ear Rack Set
Operation Manual
4. SYSTEM REQUIREMENTS
HDMI equipped source devices, connect with HDMI cables or DVI
equipped source, connect with DVI to HDMI cables
HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connect with HDMI cables
Industry standard CAT5e/6/7 cables
HDBaseT™ Receivers
8
5. FEATURES
HDMI, HDCP 1.1 and DVI compliant
Supports resolutions VGA~WUXGA, 4K2K@24/25/30Hz & YUV-420 @60Hz
and 480i~1080p dependent upon the output display’s EDID settings
Supports uncompressed video/audio up to 10.2Gbps
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
Supports distances up to 100 meters through CAT6/7 cables
Supports 3D signal display dependent upon the output display EDID
settings
Supports PoC (Power over Cable) on compatible receivers only
Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at
12-bit resolution
Supports bi-directional IR from input and output locations
Supports RS-232, remote control, on-panel control and IP Control (Telnet
& Web GUI)
Supports LAN serving function through the LAN port
2U size design
Supports external and internal EDID settings
Supports RS-232 for Matrix Control, plus RS-232 pass-through: Third-party
devices can be controlled in each zone via RS-232 from the head-end to
the receiver, or head-end devices can be controlled via RS-232 from any
receiver in any zone.
Note:
1. The PoC function is designed for powering compatible receiver units only—
non-PoC receivers will need their own power supply. Receivers of another
brand may not be compatible.
2. Do not connect the LAN port to CAT outputs of this device or to CAT inputs
or receiver. Doing so may damage the unit.
3. Do not connect more than one Ethernet/network link within the Matrix
system, doing so may trigger the device to shoot down.
9
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER LOCK
MENU OUTA 1B2C3D4
IN
E5F6G7H8
2 3 4 5 61
1LCM : Displays the setting information of each input and output
setting.
2POWER: Press this button to power the device on/o. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3LOCK: Press this button for 3 seconds to lock all the buttons on the
panel; press again for 3 seconds to unlock. The LED will illuminate
green when locked.
4IR: IR Receiver window (accepts the remote control signal of this
device only).
5MENU: Press this button to access the LCM menu system, from here
EDID settings can be managed and IP system settings are displayed.
61~8/A~H and In/Out: Press the Out or In button to select the output
or input mode and then press the required number button to make
the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2, then the following sequence of button
presses need to be performed:
Press: Out →A→B→C→D→In→1→Menu,
and then press: Out→E→F→G→H→In→2→Menu.
Note: If the menu button is not pressed the selection will not be changed.
10
6.2 Rear Panel
RS232
SERVICE
IR OUT
IR IN
IR OUT
IR IN
IR OUT
IR IN
ALL A B C D E F G H
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUTCAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
MAIN 24V
POE 24V
1
HDMI IN
2
HDMI IN
3
HDMI IN
4
HDMI IN
5
HDMI IN
6
HDMI IN
7
HDMI IN
8
HDMI IN
1
2
3
4
V+
GND
GND GND
V+
LAN
2 4
3
510 111
6
8
7
9
1LAN: Connect to an active network for LAN serving and Telnet and
Web GUI control (refer to Sections 6.8 and 6.9).
When the Matrix or any compatible LAN equipped receivers are
connected to a network, this allows the network access (including
internet access if available) to be shared between the Matrix and
all connected receivers. Connect any Ethernet equipped device e.g.
a Smart TV or games console to the LAN port of a receiver for that
device to share the network/internet access.
Warning: Please do not connect more than one active Ethernet link
within the Matrix system.
2RS-232: Connect to a PC or control system with D-Sub 9-pin cable for
the transmission of RS-232 commands.
3ALL IR OUT: Connect to the IR blaster for IR signal transmission to the
source side. Place the IR blaster in direct line-of-sight of the equipment
to be controlled for it will blaster out all signal received from the IR IN
at the receiver sides.
4ALL IR IN: Connect to the IR extender for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR extender
for it will send out the signal to all receiver's IR OUT.
5SERVICE: Manufacturer use only.
6IR OUT 1~8: Connect to the IR blasters for IR signal transmission. Place
the IR blaster in direct line-of-sight of the equipment to be controlled
for it will blaster out the IR signal received from the receiver side
choosen by input selection.
7R IN 1~8: Connect to the IR extenders for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR extender
for it will send out the IR signal to the selected receiver's IR OUT.
8CAT5e/6/7 OUT 1~8: Connect from these CAT outputs to the CAT input
port of the receiver units with a single CAT5e/6/7 cable for HDMI Audio/
Table of contents
Other CYP Matrix Switcher manuals
CYP
CYP OR-44U-4K22 User manual
CYP
CYP CMPRO-U4H4CVE User manual
CYP
CYP Elpro Video Labs CDPS-UC4H4HFS User manual
CYP
CYP CMPRO-U8H8CVE User manual
CYP
CYP PU-8H8HBTPL-4K User manual
CYP
CYP CDPS-44SM User manual
CYP
CYP SM-2X4-HDMI-LC User manual
CYP
CYP PU-O4H4C User manual
CYP
CYP CPLUS-662CVEA User manual
CYP
CYP PUV-44XPL-AVLC User manual
