CyberData 011121 Manual

4.00 [101.6]

120°

VoIP Speaker

Mounting Template

Speaker Hole Diameter:

7.50 [190.5]

Screw Hole Diameter:

0.1875 [4.75]

Dimensions are in inches [millimeter]

Mounting Template

Getting Started

• Create a plan for the locations of your Speakers.

• Prior to installation, consult local building and electrical code requirements.

Typical System Installation

Parts

Contacting CyberData

The Auxiliary Analog Speaker is an option for the CyberData SIP or InformaCast Enabled

Speakers to extend the coverage area.

When connecting the Auxiliary Analog Speaker to the SIP or InformaCast Enabled Speaker, the

total speaker wattage is the same. However, by adding this Auxiliary Analog Speaker, additional

coverage can be realized.

The Auxiliary Analog Speaker can be mounted with the same mounting hardware options

available for the SIP or InformaCast Enabled Speakers.

Auxiliary Speaker IP Speaker

802.3af/at Compliant Ethernet Switch

IP Phone IP PBX Server

Auxiliary Speaker IP Speaker

(1) Template for Speaker

and Screw Holes*

(1) Drop Ceiling Mounting Kit

(3) #8 Nylon Thumb Nuts

(3) #8 Fender Washers

(3) 8-32 x 1 1/4” Mounting

Screws

(1) Drywall Mounting Kit

(3) Plastic Ribbed Anchors

(3) #6 Sheet Metal Screws

* See the last page of this document

(1) Speaker Assembly

Sales: 831-373-2601 ext. 334

Support: 831-373-2601 ext. 333

Support Website: https://support.cyberdata.net/

RMA Department Contact and Status: https://support.cyberdata.net/

Warranty Information: https://support.cyberdata.net/

Corporate Headquarters

CyberData Corporation

3 Justin Court

Monterey, CA 93940, USA

Phone: 831-373-2601

Fax: 831-373-4193

https://www.cyberdata.net/

Printing Instructions: Before printing this document or the mounting template, check the following:

• Make sure that the Paper Size setting of the printer is set to 11”x 17”.

• Make sure that the Page Scaling setting of the printer is set to NONE (with no scaling [1:1])

• Print on 11” x 17”-sized paper.

The IP Endpoint Company

Installation Quick Reference

Auxiliary Analog Speaker

011121

Ceiling Tile Mounting

Drywall Mounting

To mount a speaker:

1. Use the TEMPLATE on the back of this

document to cut a hole in the wall or ceiling,

and prepare holes for the screws.

2. Connect the (+) and (-) speaker wire terminal

connectors to the binding posts of the speaker

assembly.

3. For drop ceiling mounting, position the

SPEAKER ASSEMBLY in the ceiling so that

its screw holes align with those you prepared.

4. For drywall mounting, place the three

PLASTIC RIBBED ANCHORS in the holes

you prepared, and position the SPEAKER

ASSEMBLY over them, aligning the screw

holes in the assembly with the anchors.

5. For drop ceiling mounting*, use the three

8-32 x 1 1/4" MOUNTING SCREWS, #8

NYLON THUMB NUTS, and #8 FENDER

WASHERS to secure the speaker.

For drywall mounting, use the three #6 SHEET

METAL SCREWS to secure the speaker.

* For weak ceiling tile, CyberData offers a

reinforcing mount (CyberData part number

010991).

#8-32x1 1/4" Pan Head Phillips

Ceiling Mounting Kit

Template

Ceiling Tile or Dry Wall

Optional Reinforcement Mount

P/N: 010991 (Sold Seperately)

#8 Fender Washer (3x)

#8 Nylon Thumb Nut (3 Pieces)

Auxiliary Speaker

Machine Screw (3 Pieces)

Ceiling Mounting Kit

Thickness at 0.625"

Drywall Mounting Shown

Prepare Hole for Plastic Anchors

Drill Bit Size: 3/16" or 0.1875"

[190.5mm]

7.5" Diameter Hole

Twist-Resistant Plastic Anchor for

Block, Brick and Drywall

Mounting Screw &

Plastic Anchor

(3 Pieces Each)

Auxiliary Speaker

Dimensions

Connections

9.055 [230.00]

Ø 5mm

Max. Height 3.819 [97.01]

3.581 [90.96]

3.699 [93.96]

Dimensions are in Inches [Millimeters]

Binding Posts

12 - AUX SPKR OUT (-)

11 - AUX SPKR OUT (+)

10 - RELAY - NO

9 - RELAY - COM

8 - NOT USED

7 - NOT USED

6 - LINE - OUT (-)

5 - LINE - OUT (+)

4 - BTN SENSE - (+)

3 - BTN SENSE - COM

2 - LED COM

1 - LED (+)

CLASS II WIRING

IP Speaker

8 Ohm Auxiliary Analog Speaker

Red (+)Black (-)

High-purity copper

16-gauge wire and

a maximum length

of 20 feet

Part #011121

Other CyberData Speakers manuals

CyberData

CyberData 10844 User manual

CyberData

CyberData 11103 User manual

CyberData

CyberData 011395 User manual

CyberData

CyberData 011458 Manual

CyberData

CyberData 011588 Manual

CyberData

CyberData 011504 Manual

CyberData

CyberData 11180 User manual

CyberData

CyberData 011487 Manual

CyberData

CyberData 011402 Manual

CyberData

CyberData VoIP V2 User manual

CyberData

CyberData Alteva User manual

CyberData

CyberData VoIP Ceiling Speaker User manual

CyberData

CyberData RAL 9002 User manual

CyberData

CyberData 011487 Manual

CyberData

CyberData 011511 Manual

CyberData

CyberData 011401 Manual

CyberData

CyberData 011216 Manual

CyberData

CyberData 011394 SERIES User manual

CyberData

CyberData 011520 Manual

CyberData

CyberData 011098B User manual

CyberData

CyberData 011102 series User manual

CyberData

CyberData 011523 Manual

CyberData

CyberData VoIP Ceiling Speaker User manual

CyberData

CyberData VoIP Ceiling Speaker User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide