Cyber Controller User manual
Cyber Controller
INSTRUCTION MANUAL
Please read this manual thoroughly before use and keep it handy for future reference.
WARNINGS and CAUTIONS
WARNINGS
xTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
- DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
- DO NOT INSERT ANY MEALMETALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHERS
OPENINGS ON THE EQUIPMENT.
CAUTIONS
EXPLANATION OF GRAPHICAL SYMBOLS
The lighting flash with arrowhead symbol, within a triangle, is intended to alert the user
to the presence of un-insulated “dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instruction in the literature
accompanying the product.
2
COMPLIANCE STATEMENT
FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE
DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND
CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE
IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A LA NORME NMB-003 DU CANADA.
CE COMPLIANCE STATEMENT
WARNING
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO
INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.
3
IMPORTANT SAFEGUARDS
Please install the product on a completely flat floor.
-Always check the strength and stability of the installation location.
-Do not drop the appliance on the floor. This may result in damage or injury.
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or
covers.
-There are no user-serviceable parts inside. Contact qualified service personnel for
maintenance.
Stop using the appliance if there appears to be any operational problem.
-Immediately turn the power off to the appliance if there is any abnormal condition such as
smoke or unusual smells.
-Continuing to use the appliance under abnormal conditions may result in serious damage.
Always use the recommended power.
-Using incorrect power source ratings may result in fire, electric shock, or damage.
Always handle the connection cable with care.
-Never damage or modify the connection cable.
-Do not pull, expose to heat, or place heavy objects on the connection cable.
-Non-observance of these warnings may result in fire, electric shock or damage.
Never use the appliance in places where there are flammable materials.
-Never use the appliance in places where flammable materials such as gas are used.
This may result in fire, explosion, and other serious accidents.
Never touch un-insulated parts with wet hands.
-Touching un-insulated parts with wet hands may result in serious electric shock.
Never expose the appliance to water or moisture.
-If the appliance gets wet, immediately turn the power off.
-Stop using the appliance if it gets wet. Contact the manufacturer immediately.
Use the appliance indoors only.
-Do not place the appliance outdoors or expose it to rain or moisture.
-If dropped in water, the appliance may be corroded and damage.
Do not use the appliance where there is excessive dust, smoke, or moisture.
-Using the appliance under such conditions may result in fire, electric shock or serious damage.
If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth.
- Do not use chemical agents such as alcohol or benzene.
4
TABLE of CONTENTS
WARNINGS AND CAUTIONS 2
COMPLIANCE STATEMENT 3
CECOMPLIANCESTATEMENT
IMPORTANT SAFEGUARDS 4
1. INTRODUCTION 6
2. PACKAGE CONTENTS 7
3. INSTALLATION CONFIGURATION 8
3.1BasicConfigurationofDVR&CyberController 8
3.2 Basic Configuration of Matrix System & Cyber Controller 9
3.3 The Example of Multi Configuration 10
4. OPERATING CONTROLS 11
4.1FrontView 11
4.2 Rear View 12
4.3 Operation by Part 13
5. OPERATION 16
5.1 POWER 16
5.2 DVR, Camera ID & Monitor NO. Selection 16
5.3 SYSTEM SETUP 17
5.3.1SYSTEMINFO 17
5.3.2 PASSWORD SETUP 18
5.3.3 BACK LIGHT TIME 19
5.3.4FACTORYDEFAULT 19
5.3.5 SYSTEMRESET 19
5.3.6 CAMERA SETUP 20
5.3.7 DVR SETUP 22
5.4 LOCK 24
5.4.1LOCKSETTING 24
5.4.2 LOCK CANCEL 24
6. DIMENSION 25
7. SPECIFICATION 26
APPENDIX A – The List of GLB(Short) Key 27
APPENDIX B – Trouble Shooting 29
APPENDIX C – OPTIONAL ITEM 30
5
1. INTRODUCTION
The Cyber Controller, Cyber Scan Dome, Video Matrix System & Digital Video Recorder make up the
building blocks for any surveillance/security system. Using a multiple Cyber Controller and multiple
dome cameras, no place is too large for monitoring and recording. Extendable and flexible
architecture facilitates remote control functions for a variety of external switching devices such as
DVR, Matrix System and Cyber Scan Dome Camera.
FEATURES
＊128 Monitor Control, 255 DVR Control, 999 Camera Control
＊Built in Jog shuttle for easy playback
＊Built in joystick for easy control of Zoom In/Out, Pan/Tilt
＊Multi Protocol Built In (Cyber Scan (I,II) / P-D / P-P)
＊Easy extension up to 6 different slave controller (Recommendable)
＊RS-485/422 Communications (Max. 1.2Km)
＊LED indicator for power, alarm, communication input etc.
How to operate with Cyber Controller?
1) Cyber Scan Dome Camera
＊Built in 3 Axis Joystick
＊Built in Pan/Tilt, Zoom In/Out Controls
＊Focus Near/Far, IRIS Open/Close
＊Main Menu Set Up Available
＊Preset, Auto Scan, Tour and Pattern Controls
＊RS-485 or RS-422 Operation
＊Easy Wiring Connection and Operation
＊Quick Preset Set Up and Recall
2) DVR Control (4Ch, 9Ch and 16Ch)
＊Built in Jog shuttle
＊Various Function Key to control DVR
＊Image Sequence/Multi Screen/Freeze/ESC/Menu Available
＊Control REC, STOP, Reverse Playback, Play Button
＊Main Menu Set Up Available
＊Multi Camera Control Available (Max. 999)
＊Direct Connection from Junction box for easy wiring
＊Slave Controller Extendable
6
1. INTRODUCTION
3) Video Matrix System (16Ch, 32Ch)
＊16Ch Input 4 Monitor Output / 32Ch Input 8 Monitor Output
＊16Ch Alarm Input (1U, Alarm Device as an accessory)
＊32Ch Alarm Input (2U,Built in the case)
＊Direct Connection with DVR, VDA etc
＊Easy extension using RJ-45 Cable
＊RS-422/485 PTZ Connection and RS-232 PC Control
＊Equal video strength for all outputs
＊Color or B&W compatible
Precautions for proper Operation
＊Do not install the unit a place subject to direct sunlight, excessive moisture, dust or vibrations
where ventilation is poor.
＊Please use the unit in the range of a guarantee temperature and humidity of operation.
＊Please set ID of a camera as the same number as the input channel to DVR.
2. PACKAGE CONTENTS
The Cyber Controller contains the following.
①Cyber Controller Unit ------- 1 ②Junction Box ------- 1
③RJ-45 Cable ------- 2 ④Instruction Manual ----- 1
7
3. INSTALLATION & CONFIGURATION
3.1 Basic Configuration of DVR & Cyber Controller
8
Junction Box
3. INSTALLATION & CONFIGURATION
3.2 Basic Configuration of Matrix System & Cyber Controller
9
Junction Box
3. INSTALLATION & CONFIGURATION
3.3 The Example of Multi Configuration
10
Table of contents
Popular Controllers manuals by other brands
Digiplex
Digiplex DGP-848 Programming guide
YASKAWA
YASKAWA SGM series user manual
Sinope
Sinope Calypso RM3500ZB installation guide
Isimet
Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions
LSIS
LSIS sv-ip5a user manual
Rockwell Automation
Rockwell Automation 1769-L31 installation instructions
