Custom Audio Electronics FT190HACCP User manual

FT190HACCP

Thermal panel printer

with PT1000 thermal probe

FT190HACCP

User’s manual

www.custom.it

FT190HACCP

Printer components

1-Print mechanism

2-Case

3-Paper outfeed

4-Paper loading label

5-Front panel

6-Paper roll compartment

7-Control panel

8-Feed connector

9-Paper winder connector

10-Interface connector

11-External “print” key

connector

FT190HACCP

in any form whatsoever, whether it be on paper or through computer

processes, is strictly prohibited. Custom Engineering s.r.l. and the resource

teams employed in the making of this manual will not be held responsible for

any problems arising as a result of improper use of this manual, as they

guarantee that the information contained in it has been subjected to careful

inspection.

Any suggestions regarding errors in its contents or possible improvements

will, nonetheless, be greatly appreciated. The products are continuously

checked and improved. For this reason Custom Engineering s.r.l. reserves

the right to modify the information contained in this manual without prior

notice.

COD. DOME - FT190HACCP REV.1.00

Custom Engineering

Str. Berettine 2 - 43010 Fontevivo (PARMA) - Italy

Tel. : +39 0521-680111 Fax : +39 0521-610701

http: www.custom.it Email : [email protected]

FT190HACCP

ytimrofnoCfonoitaralceD"EC"ytimrofnoCfonoitaralceD"EC" ytimrofnoCfonoitaralceD"EC" ytimrofnoCfonoitaralceD"EC"ytimrofnoCfonoitaralceD"EC"

NEdna22ediuGCEI/OSIsdradnatshtiwecnadroccanINEdna22ediuGCEI/OSIsdradnatshtiwecnadroccanI NEdna22ediuGCEI/OSIsdradnatshtiwecnadroccanI NEdna22ediuGCEI/OSIsdradnatshtiwecnadroccanINEdna22ediuGCEI/OSIsdradnatshtiwecnadroccanI 41054 :°N 9963340CD

:emans'rerutcafunaM.l.r.sgnireenignEmotsuC

s'rerutcafunaM :sserdda 2enittereBadartS )amraP(ovivetnoF ylatI

:tcudorpehttahtseralceD

:emantcudorPmsinahcemtnirplamrehthtiwretnirplenaP

:emanepyT091TF

:ledoMPCCAH-091TF

:sevitceridgniwollofehthtiwytimrofnocnisi

86/39/CEE;13/29/CEE;633/98/CEEsevitceridytilibitapmoccitengamortcelE

:sdradnatsgniwollofehthtiwecnadroccanI

22055NE BssalC tnemerusaemfosdohtemdnastimiL foscitsiretcarahcecnabrutsidoidarfo tnempiuqeygolonhcetnoitamrofni

5991

1-28005NE-ytilibitapmoccitengamortcelE :2traP.dradnatsytinummilareneG .stnemnorivnelairtsudnI

2991

2-4-00016NEstnemeriuqeregrahcsidcitatsortcelE riaVK8,egrahcsidtcatnocVK4 egrahcsid

5991

4-4-00016NEtsrub/tneisnartlacirtceletsaF .stnemeriuqer VK5.0sniamCD

5991

04105VNEycneuqerf-oidardetaidaR .stsetytinummI.sdleifcitengamortcele zHK1%08,zHM0001-zHM08,m/V3MA

3991

9991rebmetpeS

TABLE OF CONTENTS

iFT190HACCP

INTRODUCTION

CONTENTS OF THE MANUAL......................................................................1

CONVENTIONS USED IN THE MANUAL .....................................................1

GENERAL INFORMATION REGARDING SAFETY .....................................1

UNPACKING THE PRINTER .........................................................................3

GENERAL FEATURES..................................................................................3

DESCRIPTION OF THE PRINTER...............................................................4

1. INSTALLATION AND USE

1.1 CONNECTIONS................................................................................... 1-1

1.1.1 Power supply ................................................................................. 1-1

1.1.2 Paper winder .................................................................................. 1-2

1.2 CONFIGURATION ............................................................................... 1-2

1.3 AUTOTEST .......................................................................................... 1-2

1.4 HEXADECIMAL DUMP ........................................................................ 1-3

1.5 MAINTENANCE.................................................................................... 1-3

1.5.1 Changing the paper roll.................................................................. 1-3

2. INTERFACES

2.1 RS232 SERIAL .................................................................................... 2-1

2.2 CALENDAR CLOCK (OPTIONAL)...................................................... 2-2

2.2.1 Adjusting the clock through the keypad ......................................... 2-2

3. PRINTER FUNCTIONS

3.1 PRINT DIRECTION ............................................................................. 3-1

3.2 CONTROL CHARACTERS ................................................................. 3-2

4. TECHNICAL SPECIFICATIONS

4.1 TECHNICAL SPECIFICATIONS......................................................... 4-1

4.2 DIMENSIONS....................................................................................... 4-2

5. CHARACTER SETS

5.1 CHARACTER SETS ............................................................................ 5-1

INTRODUCTION

1FT190HACCP

CONTENTS OF THE MANUAL

Inadditionto theintroductionwhichlists:the conventionsusedinthemanual,

generalinformation relativeto safety,unpacking ofthe printerandabriefde-

scriptionof theprinteritself, highlightingitsmain features,themanual issplitup

intothefollowingchapters:

Chapter1: Containingtheinformationrequiredfor installingandusing theprinter

correctly

Chapter2: Containing thespecifications ofthe interfaces

Chapter3: Containing thedescriptionof theprintercommandset

Chapter4: Containing thetechnicalspecificationsofthe printer

Chapter5: Containing thecharacter sets(fonts) usedby theprinter

CONVENTIONS USED IN THE MANUAL

N.B.

Givesimportant informationor suggestionsrelative totheuseofthe

printer

WARNING

Theinformationmarked withthissymbolmustbecarefullyheeded to

safeguardagainstdamaging theprinter

DANGER

Theinformationmarked withthissymbolmustbecarefullyheeded to

safeguardagainst injurytotheoperator

GENERAL INFORMATION REGARDING SAFETY

• Readandkeep thefollowinginstructions.

• Observeallwarningsandfollowall instructionsattachedto theprinter.

• Beforecleaning theprinter, disconnectthe feedcable.

• Cleanthe printerwitha dampcloth.Donotuse liquidorspray products.

• Donot operatetheprinterneartowater.

• Donot placethe printeron unsteadysurfaces.Itcouldfall andget seriously

damaged.

INTRODUCTION

FT190HACCP 2

• Usethe typeofelectricity supplymarkedontheprinter label.Intheevent

ofuncertainty,contact theseller.

• Positionthe printerin sucha wayas toensure thatthe cablesconnected

toitwillnotbe damaged.

• Ensurethat themaximumabsorbedcurrentof theprinterdoesnotexceed

themaximum acceptablecurrentforthetype offeed cableused.

• Donot putobjects ofany kindinside theprinter asthey couldcause a

shortcircuit ordamage partswhich couldaffect itsperformance.

• Donotspillliquidsontheprinter.

• Donot carryout technicaloperations onthe printerwiththeexceptionof

thescheduled maintenanceoperationsspecifically indicatedinthe user’s

manual.

• Disconnectthe printerfrom theelectricitysupplyandhave itrepaired bya

specializedtechnicianshouldanyofthe followingconditionsoccur:

A. Thefeed connectorhasbeendamaged.

B. Liquidhas penetratedto theinsideof theprinter;

C. Theprinterhasbeenexposedtorainorwater;

D. Theprinteris notoperatingnormally despitetheinstructionsinthe

user’smanualhavingbeenfollowed.

E. Theprinter hasbeendroppedandits casedamaged.

F. The performance of the printer is poor.

G. Theprinter doesnotwork.

INTRODUCTION

3FT190HACCP

UNPACKING THE PRINTER

Removethe printerfromthebox,taking carenottodamagethe packingmate-

rial,as itcould beneeded forfuture transportationofthemachine.

Ensurethat allthecomponentsillustratedare infactpresentandthat theyare in

perfect condition. If this is not the case, contact the after-sales assistance de-

partmentimmediately.

Printer

Manual(or Cdrom)

Paperroll (insidetheprinter)

Longscrews

N.B.

Before using the long screws, read the note to paragraph 4.2.

GENERAL FEATURES

It has a 200 dpi thermal print mechanism and uses 57.5mm paper rolls. It

can print 24 or 40 characters per line according to the selection made at the

setup stage or through a software command .

The FT190HACCP printer is so compact and lightweight that it can be in-

stalled extremely easily on any type of equipment. It is supplied with two in-

terfaces: an RS232 serial and Centronics parallel interface. To select one or

the other interface, some jumpers must be moved. The reception buffer is

1Kbytes. It can also be equipped with a Real Time Clock.

(Fig.1)

INTRODUCTION

FT190HACCP 4

DESCRIPTION OF THE PRINTER

The FT190HACCP printer has an ABS casing (1) with a front cover (2) which

opens to allow access to the paper roll and print head.

The control panel is located on the front (3) and has a PRINT key, a FEED

key and START/STOP and three LEDs: Power, Status and START/STOP.

• PRINT key. It often can be used in the parameters setting procedure.

• FEEDkey.When thisis pressed,the paperfeedsforwardmanually. Ifthis

key is pressed briefly the date and time of day is printed.

• START/STOP key. It can be used in the printer mode 2 or 3.

• The POWER LED indicates that the printer is receiving a digital power

supply.

• TheSTATUSLED,whenflashing, signalsthatthe paperisfinished. When

litsteadily,it signalsthe presenceofanerror(head powersupply toohigh

or too low or head temperature too high).

• The START/STOP LED can be used in the printer mode 2 or 3.

(Fig.2)

1. INSTALLATION AND USE

1-1 FT190HACCP

1.1 CONNECTIONS

1.1.1 Power supply

The FT190HACCP printer is equipped with a standard 2-pin male

AMPMODU1-type connector (J7). In alternating current the supply is

identified in the 9-33V Ac range while in direct current the range is 11-47

Vdc.

1.1.2 Paper winder

Connector J8 (fig.1.1) is used to feed the external paper winder. The

position and function of the signals are given below in Table 1.1.

niPniP niP niPniPlangiSlangiS langiS langiSlangiS

1+ROTOM

2-ROTOM

(Fig.1.1)

(Tab.1.1)

PT1000 SENSORS

CONNECTORS

FEED

CONNECTOR

J4 J5

DL1

(SOLDER SIGHT)

PAPER WINDER

CONNECTOR

RECORD/HOLD INPUTS

CONNECTOR

J2 J3 SERIALS INTERFACES CONNECTOR

STATUS

SW3

(SOLDER SIGHT)

START/STOP KEY

SW2

(SOLDER SIGHT)

FEED KEY

PRINT KEY

(SOLDER SIGHT)

YELLOW

LED

SW1

(SOLDER SIGHT)

DL2

(SOLDER SIGHT)

DL3

START/STOP

POWER-ON

GREEN

LED

GREEN

LED

Table of contents

Other Custom Audio Electronics Printer manuals

Custom Audio Electronics

Custom Audio Electronics Custom User manual

Custom Audio Electronics

Custom Audio Electronics TG2460H Installation instructions

Custom Audio Electronics

Custom Audio Electronics Kube II Supplement

Custom Audio Electronics

Custom Audio Electronics SILVER User manual

Custom Audio Electronics

Custom Audio Electronics Kube II User manual

Custom Audio Electronics

Custom Audio Electronics MY3 X User manual

Custom Audio Electronics

Custom Audio Electronics TK202III User manual

Custom Audio Electronics

Custom Audio Electronics VKP80II-EE User manual

Custom Audio Electronics

Custom Audio Electronics FH190SP User manual

Custom Audio Electronics

Custom Audio Electronics s'print DPT100-B User manual

Custom Audio Electronics

Custom Audio Electronics PP54 Installation instructions

Custom Audio Electronics

Custom Audio Electronics VKP80III User manual

Custom Audio Electronics

Custom Audio Electronics KPM 216 H User manual

Custom Audio Electronics

Custom Audio Electronics TK180 Supplement

Custom Audio Electronics

Custom Audio Electronics TG1260HIII Series User manual

Custom Audio Electronics

Custom Audio Electronics Plus II User manual

Custom Audio Electronics

Custom Audio Electronics K3 User manual

Custom Audio Electronics

Custom Audio Electronics Kube II User manual

Custom Audio Electronics

Custom Audio Electronics STIMARE STIMA-SML User manual

Custom Audio Electronics

Custom Audio Electronics VK80 User manual

Custom Audio Electronics

Custom Audio Electronics PLUS2 User manual

Custom Audio Electronics

Custom Audio Electronics P190 User manual

Custom Audio Electronics

Custom Audio Electronics PRT 80 User manual

Custom Audio Electronics

Custom Audio Electronics MY3 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide