Crivit 277838 User manual
IAN 277838
DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 01/2017
Delta-Sport-Nr.: KH-2867
IAN 277838
KIDS’ SKATING HELMET
DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 01/2017
Delta-Sport-Nr.: KH-2867
DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 01/2017
Delta-Sport-Nr.: KH-2867
KIDS’ SKATING
HELMET
Instructions for use
SKATEHELM
KINDEREN
Gebruiksaanwijzing
CASQUE DE SKATE
ENFANT
Notice d’utilisation
KINDER-
SKATEHELM
Gebrauchsanleitung
Before reading, fold out the illustration page and get to know all
of the functions of your unit.
Dépliez la page avec les illustrations avant la lecture et informez-
vous ensuite au sujet des fonctions de l‘appareil.
Klap voor het lezen de pagina met de afbeeldingen open en
maak u vervolgens vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus
und machen Sie sich anschließend mit allen Funktionen des
Artikels vertraut.
1
2
5
4
87
6
3
A
C
D
G
E
F
B
5
Parts description
1. PC helmet shell
2. Ventilation holes
3. Rotary knob
4. LED on and off button
5. Size adjustment system
6. Strap divider
7. Clip closure
8. Chin strap
Beschrijving onderdelen
1. Helmschaal uit PC
2. Ventilatieopeningen
3. Draaiwiel
4. Knop “Aan / uit” LED-licht
5. Helm met maatverstelling
6. Riemverdeler
7. Klipsluiting
8. Kinriem
Désignation des pièces
1. Coque en polycarbonate
2. Ouvertures d‘aération
3. Molette
4. Bouton marche/arrêt Lumière LED
5. Système de réglage de la taille
6. Système de sangle
7. Clip de fermeture
8. Mentonnière
Teilebezeichnung
1. PC-Helmschale
2. Belüftungsöffnungen
3. Drehrad
4. An- und Ausknopf LED-Licht
5. Größenverstellsystem
6. Gurtverteiler
7. Clipverschluss
8. Kinnriemen
6 GB/IE/NI
Congratulations!
With your purchase you have decided on a high-quality product.
Get to know the product before you start to use it.
Carefully read the following operating instructions.
Use the product only as described and only for the given areas of
application. Keep these instructions safe. When passing the product
on to a third party, always make sure that the documentation is
included.
Important information
Please read the following instructions and information carefully
before using your new helmet for the first time. This helmet was
developed for use with skateboards, inline skates, roller skates and
similar groups, and manufactured according to state of the art.
Despite maximum safety standards, serious accidents may result in
injuries. In some cases, the impact may be so strong the helmet does
not effectively protect the rider from head injuries.
Compliance with the requirements according to Annex II of European
Directive 89/686/EEC (and subsequent amendments) as well as
those of harmonizing technical standard EN 1078 was certified by
the issuing authority TÜV Rheinland LGA Products GmbH, Tillystr. 2,
D-90431 Nürnberg, Germany, Notified Body No 0197.
7GB/IE/NI
Scope of delivery
1 x Inliner helmet
1 x CR2032 battery (included in article)
1 x Instructions for use
Technical data
Battery type: 3V DC CR2032
Correct use
This article is made for skateboarders, inline skaters, rollerbladers,
and similar groups. It is not suitable for other sports or for motorcy-
clists.
Safety notices
• This helmet should not be used by children for climbing or other
activities where there is a risk of strangulation or of catching should
the child get caught with the helmet.
• The helmet must fit snugly and the chin strap must be securely
fastened.
• Do not push the helmet to the back of your neck as this means that
your forehead is not protected.
• Do not wear any head cover under the helmet.
• Please ensure that air continues to circulate.
• No modifications may be made to the helmet, its structure, or indivi-
dual components.
8 GB/IE/NI
• The helmet may not be painted and/or decorated with stickers or
labels.
• The protective effect of the helmet can be seriously impaired by the
effects of paints, stickers, cleaning fluids, or other solvents.
• The helmet should protect your head in the event of an impact. This
protection is no longer provided even after a single impact (even
if it is light). Therefore the helmet must be replaced immediately
after an accident even if there is no visible damage.
• Never use solvents or scouring agents that contain petroleum to
clean the helmet, either on the outside or the inside. Always use a
detergent that is pH neutral and diluted with clear water; rub the
article carefully with a soft cloth. Then wipe it dry with a lint-free
cloth. The padding can be cleaned with a little soap and a soft
brush.
• Only use original replacement parts for your helmet.
• The LED light is not a safety aid and on no account replaces the
specific devices that are compulsory in accordance with traffic
regulations.
• The lifespan of the article depends on its use. However the article
must be replaced five years after the date of manufacture
(version: 01/2017) at the latest.
9GB/IE/NI
Warning notes for batteries
• Only use batteries from the same manufacturer and of the same
type.
• Remove the battery if it is dead or if the product is not used for a
long period. (See the disposal measures on page 14).
• Warning! Batteries may not be charged or reactivated by other
means and may not be dismantled, thrown in the fire, or short-
circuited.
• Always store the batteries out of the reach of children.
• Non-rechargeable batteries may not be recharged.
• Rechargeable batteries may only be charged with adult
supervision.
• Rechargeable batteries must be removed from the article before
they are charged.
• The terminal clamps may not be short-circuited.
Danger!
• Please handle a damaged or dead battery with extreme care and
dispose of it correctly, wearing gloves.
• If you come into contact with battery acid then wash the relevant
area with water and soap. If battery acid gets in your eyes rinse it
out using water and consult a doctor immediately!
•Cleaning and user-maintenance may not be carried out by
children without supervision.
•Batteries may not be swallowed!
10 GB/IE/NI
Changing the battery
CAUTION! Follow these instructions in order to avoid mechanical
and electrical damage.
Danger!
The article contains a battery.
If the battery stops working it can be changed.
1. Set the size adjustment system to a medium size. Pull the rotary
knob out of the size adjustment system and remove the small
thread wheel.
2. Loosen the three screws under the rotary knob using a suitable
screwdriver (not included in the scope of delivery) (figure E).
Remove the base and take the battery compartment out. Carefully
remove the empty battery from the battery holder (figure F).
3. Exchange it for a new battery.
Note: Pay attention to the plus and minus poles on the battery and
that it is inserted correctly. The battery must be fitted entirely inside
the battery holder.
4. Replace the battery holder in the rotary knob. Replace the base
and tighten the three screws. Place the thread wheel on the rotary
knob as shown. Please ensure that the three pins on the rotary
knob are positioned in the slots on the thread wheel (figure G).
Insert the rotary knob back on the size adjustment system.
Important: When you insert the rotary knob please ensure that the
size adjustment system is set to a medium size as it is not possible to
re-attach the rotary knob otherwise (figure G).
11GB/IE/NI
Switching the light on and off (figure A)
Different light settings are available to you if you press on the on and
off button (4):
Press once: lights on
Press twice: lights flash at the same time
Press three times: lights flash alternately
Press four times: lights off
HeiQ® Pure dynamiq
PURE Textile freshness
Experience the feeling of lasting freshness through the power of
silver, keeping you odour-free all day lang.
ADAPTIVE Thermal control
Feel good all over. The textile will cool you down when you’re hot,
and keep you dry longer in cold weather. Cools and minimises
perspiration.
The helmet liner contains a biocide agent (PURE TF by HeiQ®) for
an anti-bacterial, odour-inhibiting lining treatment. Active ingredient:
silver adsorbed to silicon dioxide (nano).
12
Selecting the helmet size
• Measure the size of your head and select the appropriate size.
Try several helmets on before making your decision. The size is
ideal if the skin on your temples moves with the article when you
are wearing the helmet.
• Please ensure that the helmet does not move freely on your head,
even without tightening the chin strap.
• The chin strap must be securely closed to ensure a secure fit.
The fit is correct if it is difficult to insert your finger under the chin
strap. However you must always be able to breathe, swallow, and
turn your head comfortably.
• The helmet fits correctly if it is snug but still comfortable on your
head. Do not push the helmet towards the back of your neck as this
means that your forehead will not be protected (figure B).
• If the helmet is too big (it is loose and cannot be adjusted tightly
enough) or too small (presses on your head, leaves your forehead
free), please choose the next smallest or biggest size.
• If it is not possible to adjust the helmet correctly then you may not
use it.
Adjusting the chin strap (figure C)
The general length of the chin strap can be adjusted with the loop.
You may also use the strap divider clip to adjust the length of the chin
strap.
GB/IE/NI
Table of contents
Languages:
Other Crivit Motorcycle Accessories manuals
Crivit
Crivit SP-91 User manual
Crivit
Crivit 298519 User manual
Crivit
Crivit EH-1430 User manual
Crivit
Crivit 103856 User manual
Crivit
Crivit 93726 User manual
Crivit
Crivit SH-2307 User manual
Crivit
Crivit 278612 User manual
Crivit
Crivit EH-1430 User manual
Crivit
Crivit DS-URBAN101 User manual
Crivit
Crivit CASCO JET User manual
Crivit
Crivit SP-06 User manual
Crivit
Crivit 78792 User manual
Crivit
Crivit SP-11 User manual
Crivit
Crivit SP - 501 User manual
Crivit
Crivit 90095 User manual
Crivit
Crivit 297930 User manual
Crivit
Crivit DS-MULTIX400 User manual
Crivit
Crivit 303613 User manual
Crivit
Crivit 271517 User manual
Crivit
Crivit EH-1430 User manual
