Crestron MC2W User manual

Crestron MC2W

2-Series Professional Media Controller with RF

Operations Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names and trademarks are the property of their respective owners.

Crestron MC2W 2-Series Professional Media Controller with RF

Contents

2-Series Professional Media Controller with RF: MC2W 1

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Specifications ..............................................................................................................2

Physical Description....................................................................................................3

Memory .......................................................................................................................9

Industry Compliance .................................................................................................10

Setup ........................................................................................................................................11

Rack Mounting .......................................................................................................... 11

Bussing Strip Installation ..........................................................................................12

Network Wiring.........................................................................................................12

Hardware Hookup ..................................................................................................... 13

Power Supply ............................................................................................................ 14

Establishing Communication with the MC2W..........................................................15

Troubleshooting Communications ............................................................................16

Compiling and Uploading a Program to the Control System ....................................17

Uploading Touchpanel Projects.................................................................................18

Updating the Operating System................................................................................. 19

Advanced Console Commands..................................................................................20

Switching Between Master and Slave Mode .............................................................20

Programming the MC2W.........................................................................................................21

Programming with the Crestron AppBuilder............................................................. 22

Programming with SIMPL Windows ........................................................................22

Problem Solving ...................................................................................................................... 32

Troubleshooting......................................................................................................... 32

Further Inquiries ........................................................................................................ 35

Firmware Upgrades ................................................................................................... 35

Future Updates .......................................................................................................... 36

Software License Agreement................................................................................................... 37

Return and Warranty Policies .................................................................................................. 39

Merchandise Returns / Repair Service ...................................................................... 39

CRESTRON Limited Warranty.................................................................................39

Operations Guide – DOC. 6143 Contents •i

Crestron MC2W 2-Series Professional Media Controller with RF

2-Series Professional Media

Controller with RF: MC2W

Introduction

Features and Functions

The Crestron®2-Series Professional Media Controller with RF (MC2W) is designed

for smaller home and commercial systems. The MC2W provides connectivity for

communication and control of Cresnet®, one-way wireless (RF), and third party

devices. With speed, power, and memory, the 2-Series control systems are ideal for

enhanced applications like media help desks, videoconferencing, distance learning,

and entertainment facilities.

Operating on either 418 MHz or 434 MHz, the MC2W can receive RF signals

(containing commands) from Crestron wireless user interfaces (touchpanels or

keypads). The MC2W then sends the commands to the appropriate device. Refer to

“Slot 8: C2I-MC2-CNRFGWA” on page 28 for information on selecting the

operating frequency.

Functional Summary

•

257 MIPS processor

• 36 MB of built-in memory (refer to page 9)

• Four IR/serial ports

• Two RS-232/422/485 communication ports

• Four isolated relay ports

• Four I/O ports

• One IR receiver port for use with CNXRMIRD

• One Cresnet port

• Antenna for one-way RF communications (418/434 MHz)

with various Crestron wireless user interfaces.

As with all of the Crestron 2-Series control processors, the 2-Series control engine is

a solutions-driven control technology that is at the very heart of the MC2W. The

breakthrough 2-Series control engine is based on the 257 MIPS, 32-bit Motorola

5407 ColdFireprocessor. The 2-Series operating system is vastly upgraded from

the Crestron X-generation products, yet compatible with existing Crestron software

and programming. A key feature is the new Crestron Compiler, which allows any

existing Crestron SIMPL Windowscontrol program to be easily recompiled for the

2-Series. The real-time, preemptive multi-tasking/multi-threaded operating system

offers a file system that supports long file names. The enhanced SIMPL+®

Operations Guide - DOC. 6143 2-Series Professional Media Controller with RF: MC2W •1

2-Series Professional Media Controller with RF Crestron MC2W

instruction set is also fully compatible with existing Crestron SIMPL Windows and

SIMPL+ programs.

The MC2W has the capability to operate as a standalone 2-Series control system or

as a Cresnet device as part of a 2-Series control system.

Master Mode

In master mode, the MC2W is a standalone 2-Series control system that can control

IR, serial, or Cresnet devices.

Slave Mode

In slave mode, the MC2W operates as a Cresnet device as part of a 2-series control

system. For example, the MC2W can be part of a control system that includes IR,

serial, Cresnet and RF devices, with touchpanels and RF transmitters that operate the

MC2W through another 2-Series control system.

For more information on slave mode, refer to “Switching Between Master and Slave

Mode” on page 20.

NOTE: The MC2W can only be controlled by a 2-Series control system.

Specifications

The following provides a summary of specifications for the MC2W.

MC2W Specifications

SPECIFICATION DETAILS

CPU 32-Bit Motorola 5407 ColdFire®Processor

Processor Speed 257 MIPS (Dhrystone 2.1 Benchmark)

Memory 36MB (4MB flash, 32MB SDRAM, 256KB NVRAM)1

Ports/Connectors2

NET 1 – Cresnet 4-wire interface (Expandable via Cresnet Poll

Accelerator) via 4-position Cresnet connector

COMPUTER 1 – DB9F PC interface (refer to “Establishing Communication

with the MC2W” page 15)

INFRARED – SERIAL

OUTPUT

4 – Simultaneous one-way IR or serial output via 8-position

mini-connector

IR INPUT 1 – IR input for RC5 codes from CNXRMIRD via 3-position

mini-connector

I/O 4 – Programmable digital/analog inputs & digital outputs via 5-

position mini connector

RELAY OUTPUT 4 – Normally open, isolated relays (MOV suppression) via 8-

position mini-connector

RF 1 – One-way RF receiver 434MHz or 418 MHz (switchable in

software) via 50 ohm BNC connector.

COM (A & B) 2 – DB9 bidirectional serial ports (RS-232, -422, -485) All

Cresnet Poll Accelerator ready (baud rate up to 115,200

baud)

24VDC 1 – Female receptacle for external power pack.3

Reset Buttons

HW-R Initiates system hardware reset

SW-R System restart with or without program

Power Requirements 10 Watts (0.21 Amp @ 24 VDC)

(Power supply PW-2410RU included)3

Available Cresnet Power = 14 Watts

(continued on next page)

2 •2-Series Professional Media Controller with RF: MC2W Operations Guide - DOC. 6143

Crestron MC2W 2-Series Professional Media Controller with RF

MC2W Specifications (continued)

SPECIFICATION DETAILS

Network Power Fuse

Rating

Internal 2A self-resetting fuse4

Environmental

Temperature

41° to 113°F (5° to 45°C)

Environmental Humidity 10% to 90% RH (non-condensing)

Dimensions & Weight Height: 1.7 in (4.32 cm)

Width: 19.0 in (48.26 cm) – with ears

17.03 in (43.24 cm) – without ears

Depth: 8.5 in (21.59 cm)

Weight: 4.3 lbs (2.0 kg)

1. For more information on system memory usage, refer to “Memory” on page 9.

2. For more information on controls, ports, and indicators, refer to “Physical Description” after these

footnotes.

3. For information on power source, refer to “Power Supply” on page 14.

4. Heat-sensitive device—resets within approximately 30 seconds after powering down and

removing overload condition.

Physical Description

The MC2W is housed in a black enclosure with labeling on the front and rear panels.

The front panel includes LEDs and two reset buttons. All connections to the unit are

made through the rear panel. Refer to the following illustrations.

MC2W Front Panel

MC2W Rear Panel

The MC2W contains four one-way IR/serial ports, one IR receiver port, four I/O

ports, four relay ports, two COM ports, a single RS-232 computer port, a network

connector, an RF antenna port and a 24VDC male receptacle for power supplied

through an external power pack (included).

The MC2W can be placed in a rack (with included mounting ears) or on a table with

the supplied rubber feet. Refer to “Rack Mounting” on page 11 for more information.

Operations Guide - DOC. 6143 2-Series Professional Media Controller with RF: MC2W •3

2-Series Professional Media Controller with RF Crestron MC2W

Physical Views of the MC2W

17.03 in

(43.24 cm)

1.70 in

(4.32 cm)

8.50 in

(21.59 cm)

Controls and Indicators

The MC2W front panel indicators and controls are described below.

PWR (Power)

This LED illuminates when the unit is connected to and receives 24 VDC power

from an external power pack or the Cresnet NET connector.

NET

This LED illuminates when the central processing unit is processing or

communicating with Cresnet devices (i.e., button pressed at Cresnet panel or data

received from Cresnet panel).

HW-R

Pressing this button initiates system hardware reset. (Same effect as disconnecting

and reconnecting power.)

SW-R

Pressing this button in combination with the HW-R button performs a system restart

without loading the program (refer to “Troubleshooting Communications” on page

16). Pressing it alone while the system is running restarts the program without

rebooting the processor.

ERR

This LED illuminates when an error condition is detected. This may be the result of

hardware or software failure, or a programming error. To determine the actual error

condition, examine the message available through the Crestron Viewport command

Functions | 2-Series | Error Log.

4 •2-Series Professional Media Controller with RF: MC2W Operations Guide - DOC. 6143

Crestron MC2W 2-Series Professional Media Controller with RF

SIG (RF)

This LED illuminates when there is communication (activity) at the rear panel RF

port with a Crestron wireless transmitter.

Ports

The MC2W rear panel ports are illustrated and described below.

NOTE: Interface connectors for the NET, Infrared-Serial, I/O, and Relay Output

ports are provided with the MC2W.

ANTENNA

This 50 ohm BNC connector attaches to the supplied antenna (or optional CNANT

High-Performance Extension Antenna) that is used to receive RF signals from a

transmitter device. In some installations, the RF reception range can be increased by

mounting the antenna away from the equipment with a BNC male to BNC female 50

ohm cable (not included). For information on specifying the MC2W’s RF frequency,

refer to “Slot 8: C2I-MC2-CNRFGWA” on page 28.

IR SERIAL OUT

SG S G SG S G

IR SERIAL OUT

ABC D

This connector provides four ports for IR TTL level or serial interface. Each output is

labeled S (signal) and G (ground). Infrared output is rated up to 1.2 MHz, at data rates

up to 115K. An individual UART on each port allow simultaneous firing of all ports.

Serial protocols include one-way RS-232.

NOTE: Transmission levels on the infrared – serial output connectors are in the 0 to

+5VDC range, which may not be compatible with all RS-232 devices.

NOTE: A port can be used for either IR or RS-232 communication, not both.

IR IN

T R S

This connector provides a 3-position mini connector for use with the CNXRMIRD

Infrared (IR) Detector. It is used to receive standard RC5 IR codes (such as those

transmitted by the PhilipsPronto, and many universal remotes) as well as codes from

certain devices manufactured by Sharp Electronics Corporation.

The RC5 code is a 13-bit code that has a 5-bit group, 7-bit command group and 1

stop-bit. It contains a bit to distinguish between start and repeat codes. The RC5 code

has a uniform duration of all bits. A transition in the middle of the time interval

assigned to each bit encodes the logical value. A '0' is encoded by a high to low

transition and a '1' by a low to high transition. This is also called a 'bi-phase' code.

The CNXRMIRD that ships from Crestron requires some modification before use

with the MC2W. THE CNXRMIRD ships with a mini phone jack that cannot be used

with the 3-position connector on the IR IN port of the MC2W. To modify the

CNXRMIRD to connect to the MC2W:

1. Snip the mini phone jack from the CNXRMIRD.

2. Using a voltmeter, determine which wire connects to the Tip, Ring, and

Shield of the mini phone jack.

Operations Guide - DOC. 6143 2-Series Professional Media Controller with RF: MC2W •5

2-Series Professional Media Controller with RF Crestron MC2W

3. Connect the bare wires of the CNXRMIRD to the appropriate pins on the

3-position connector supplied with the MC2W.

For more information on the CNXRMIRD refer to the latest revision of the

CNXRMIRD Infrared Detector Operations Guide (Doc. 8165).

I/O

1 2 3 4 G

This connector provides four software programmable analog and digital inputs as well

as digital outputs. Digital outputs offer 250mA sync from maximum 24 VDC; catch

diodes for use with "real world" loads. Digital inputs are rated 0 – 24 VDC, 20K ohms

input impedance, logic threshold 1.25 VDC. Analog inputs are rated 0 – 10 VDC,

protected to 24 VDC maximum, 20K ohms input impedance; pin-programmable 2K

ohms pullup resistor to +5V.

NOTE: Digital outputs are TTL values and may not work with devices requiring a

“dry” contact closure (e.g., low voltage motor controllers).

NOTE: Ports can be used for either input or output, but not both. For more

information, refer to “Slot 3: C2I-MC2-IO4” on page 24.

RELAY OUT

1 2 3 4

RELAY OUT

These connectors provide four normally open, isolated relay contact groups. Each

relay contact closure is rated 1A, 30 VAC/DC; MOV arc suppression is provided

across contacts for use with "real world" loads. For more information, refer to “Slot 4:

C2I-MC2-RY4” on page 26.

COM (A & B)

COM B

COM A

These two DB9 (male) software programmable, bi-directional serial ports are

available for RS-232, RS-422, or RS-485 communication, with hardware and software

handshaking. Speeds are rated up to 115,200 bps. Both ports are Cresnet Network Poll

Accelerator ready.

NOTE: The Cresnet Network Poll Accelerator allows a 2-Series control system to

maintain a fast response time (high-speed communications) between the control

system and a large number of Cresnet devices. For more information, refer to the

latest revision of the Network Poll Accelerator Operations Guide (Doc. 6087).

NOTE: The pinout of each 9-pin port is non-standard (refer to the table after these

notes, titled "Non-Standard COM Pinout"); it contains RS-422 pins in addition to

RS-232. This may result in a conflict with some equipment and therefore all nine

pins should not be used. Only the required pins for each communication type

should be connected. For RS-232 and –422, pins 2, 3, 5, 7, and 8 are wired straight

through.

NOTE: Data Set Ready (DSR) and Data Terminal Ready (DTR) are not supported.

NOTE: To support RS-485, tie pin 1 (RXD-) to pin 9 (TXD-) and pin 4 (TXD+) to

pin 6 (RXD+) in the cable. Refer to the table after this note, titled "COM Pinout to

RS-485 Bus".

6 •2-Series Professional Media Controller with RF: MC2W Operations Guide - DOC. 6143

Other manuals for MC2W

This manual suits for next models

Table of contents

Other Crestron Controllers manuals

Crestron

Crestron ST-VC User manual

Crestron

Crestron CLC-1LEDPWM-RGBW-EX User manual

Crestron

Crestron 4 Channel Motor Control Module CLX-1MC4 User manual

Crestron

Crestron SP-SC User manual

Crestron

Crestron MC2W Manual

Crestron

Crestron CP4-R User manual

Crestron

Crestron INET-IOEX-IRCOM User manual

Crestron

Crestron DM-RMC-4K-SCALER-C User manual

Crestron

Crestron 4K DigitalMedia 3-Series Dimensional drawing

Crestron

Crestron CLS-EXP-DIMFLV User manual

Crestron

Crestron CGDMX-512BI How to use

Crestron

Crestron DigitalMedia 8G DM-RMC-200-S Dimensional drawing

Crestron

Crestron MC2E User manual

Crestron

Crestron DM-RMC-4K-100-C-1G User manual

Crestron

Crestron IPAC User manual

Crestron

Crestron SP-RY User manual

Crestron

Crestron CNXFZ User manual

Crestron

Crestron MPC-M10 How to use

Crestron

Crestron DigitalMedia Room Controller DM-RMC-100 How to use

Crestron

Crestron MPC-M5 Dimensional drawing

Crestron

Crestron CNECI-4A User manual

Crestron

Crestron DM-RMC-SCALER-S How to use

Crestron

Crestron QM-RMC User manual

Crestron

Crestron HD-CTL-101 User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual