crazybaby Mars User manual
Hello
crazybaby.com
Quick Start Guide
Mars Base Power Button
DC/IN: 12V/2.0A
USB TYPE-A: 5V/1A
(Charge Smart Device Only)
Battery Level Indicator
Mars Craft LED Indicator
Mars Craft Power Button
Mars Base Power Indicator
Mars Base
Mars Craft
Levitation Indicator
crazybaby.com/support/app
Download crazybaby App for more features
How to Charge
Charge before using Mars for the rst time
Charge Craft
Mars Craft
Bottom View
Mars Base
Top View
Manual Charge
Center the Craft on the Pivot of the Base. If the Base power is on
with more than 20% battery, or the Base power adaptor is
plugged in, the Craft will be charging.
Auto Charge
Levitating Craft will automatically land on the Base when battery
is lower than 10% to get charge.When charging, LED indicator of
the Craft will display a breathing light.
Charge Smart Device
USB Type-A/ 5V/1A
Charge Base
DC/IN
Craft will land on Base if Base battery is lower than
20%. Base Power Indicator will display a flashing red
light when Base battery is lower than 10%.
How to connect a Single Mars
Power on Mars Craft.
Press and hold the button for one second. Release
when you see a light bar illuminate.
LED flashes indicating bluetooth searching is on.
Open crazybaby App and follow the instructions to
connect your smart device via bluetooth.
LED indicator will rotate around the Mars Craft when
connection is complete.
Enjoy your music or prepare levitation set up.
How to Pair two Mars for True Stereo
Craft A Craft B
Craft A Craft B
Craft BCraft A
Power on Mars Craft A.
Then Power on Mars Craft B.
Press and hold the button of Craft A. Release when
you see three light-bars illuminate.
Press and hold the button of Craft B. Release when
you see four light-bars illuminate, and wait for the
crafts to pair.
LED indicator will rotate around each Crafts when
pairing is complete.
Press and hold the button of Craft A for about one
second. Release when you see a light bar
illuminate.
Open crazybaby App and follow the instructions to
connect your smart device via bluetooth.
crazybaby.com/support/app
Audio cue will notice you with successful connection.
Choose from Double-up/Stereo Audio Mode in
crazybaby App.
Craft A
StereoDouble-up
How to Levitate
Power on Mars Base.
Center the Craft on the Pivot of the Base.
Before levitation set up, please make sure your smart device
has already connected with Mars Craft via Bluetooth.
The craft will raise as the levitation indicator on top
of the Base flashes slowly.
Light indicator will turn solid when levitation is
complete.
Enjoy your music.
Levitation Indicator
Levitation Indicator Slow Flashing: Levitation system is opening.
Solid White: Levitation process has completed.
Quick Flashing: Levitation system is closing.
Light O: Levitation system is closed.
DO NOT place the Craft on the Base, or interfere
Craft lifting while the levitation indicator is
flashing. Only place Craft when the light is off.
The levitation indicator will turn off when it has reset.
It is now safe to place Craft back on the Base.
Wait for the Craft to levitate again.
How to Levitate
If levitation fails do not place the Craft back on the
Base immediately.
Put aside Mars craft and wait for the levitation system
to reset while the indicator is quickly flashing.
Levitation Instruction
Keep magnetized items (Electronics, credit cards, etc.)
at least 12 inches (30cm) from the base to protect
them from the magnetic field.
Danger : Do not put any metal between the Craft and
the Base. It will affect the levitation and may cause
damage.
30 cm
(12 inches)
Set up your Mars by crazybaby levitation speaker
system on a stable work surface.
Mars Craft will not levitate if the tilt angle is greater
than 3°.
>3°
See video demonstration by visiting crazybaby.com/support
# Video Demo #
Other manuals for Mars
1
Table of contents
Other crazybaby Speakers manuals
